Subversion Repositories HomeAutomation

PRG            = bios

OBJ            = vectors.o bios.o flash.o mcp2515/mcp2515.o

MCU_TARGET     = atmega8

OPTIMIZE       = -Os -mcall-prologues

BIOS_START     = 0x1562

BOOT_START     = 0x1f00

DEFS           =

LIBS           =

TARGET_CLK_SRC = 0x24

#TARGET_CLK_SRC for mega88		

#0xe7		#CKDIV8=1, external crystal

#0xe0		#CKDIV8=1, external clock

#0xe2		#CKDIV8=1, internal RC

#TARGET_CLK_SRC for mega8

#0x24		#BODLEVEL = 4.0V, BODEN=enabled, internal 8MHz

#0x20		#BODLEVEL = 4.0V, BODEN=enabled, external clock

#

# You should not have to change anything below here.

#

CC             = avr-gcc

# Override is only needed by avr-lib build system.

override CFLAGS        = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) $(DEFS)

override LDFLAGS       = -Wl,-Map,$(PRG).map,--defsym,__bios_start=$(BIOS_START),--defsym,__boot_start=$(BOOT_START),-T$(MCU_TARGET)_bios.ld,--cref

override ASFLAGS       = -x assembler-with-cpp -Wa,-gstabs -mmcu=$(MCU_TARGET) $(DEFS)

OBJCOPY        = avr-objcopy

OBJDUMP        = avr-objdump

SIZE           = avr-size

SZFLAGS        = 

UPLOAD         = avrdude

#avrispv2 avr910

ULFLAGS        = -p $(MCU_TARGET) -P /dev/ttyS0 -c avr910 -b 115200 -U flash:w:$(PRG).hex

ifeq ($(MCU_TARGET),atmega88)

#BOOTRST=0, BOOTSZ0=1, BOOTSZ1=1

EXTFUSE  = 0x06

#BODLEVEL = 4.3V

HIGHFUSE = 0xdc

LOWFUSE  = $(TARGET_CLK_SRC)

endif

ifeq ($(MCU_TARGET),atmega8)

#BOOTRST=0, BOOTSZ0=1, BOOTSZ1=1

HIGHFUSE = 0xd6

LOWFUSE  = $(TARGET_CLK_SRC)

endif

AVRDUDE_WRITE_FUSEBITS = -u

ifdef EXTFUSE

AVRDUDE_WRITE_FUSEBITS += -U efuse:w:$(EXTFUSE):m

endif

ifdef HIGHFUSE

AVRDUDE_WRITE_FUSEBITS += -U hfuse:w:$(HIGHFUSE):m

endif

ifdef LOWFUSE

AVRDUDE_WRITE_FUSEBITS += -U lfuse:w:$(LOWFUSE):m

endif

#comment this line for not programming fusebits

#ULFLAGS      += $(AVRDUDE_WRITE_FUSEBITS)

default: $(PRG).elf lst

	@$(SIZE) $(SZFLAGS) $(PRG).elf

all: $(PRG).elf lst text eeprom

$(PRG).elf: $(OBJ)

	$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)

clean:

	rm -f $(OBJ) $(PRG).elf *.eps *.png *.pdf *.bak 

	rm -f *.lst *.map $(EXTRA_CLEAN_FILES)

lst:  $(PRG).lst

%.lst: %.elf

	$(OBJDUMP) -h -S $< > $@

# Rules for building the .text rom images

text: hex bin srec

hex:  $(PRG).hex

bin:  $(PRG).bin

srec: $(PRG).srec

%.hex: %.elf

	$(OBJCOPY) -j .text -j .data -j .bootloader -O ihex $< $@

%.srec: %.elf

	$(OBJCOPY) -j .text -j .data -j .bootloader -O srec $< $@

%.bin: %.elf

	$(OBJCOPY) -j .text -j .data -j .bootloader -O binary $< $@

# Rules for uploading rom images to flash

install: hex

	$(UPLOAD) $(ULFLAGS)

# Rules for building the .eeprom rom images

eeprom: ehex ebin esrec

ehex:  $(PRG)_eeprom.hex

ebin:  $(PRG)_eeprom.bin

esrec: $(PRG)_eeprom.srec

%_eeprom.hex: %.elf

	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O ihex $< $@

%_eeprom.srec: %.elf

	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O srec $< $@

%_eeprom.bin: %.elf

	$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O binary $< $@

# Every thing below here is used by avr-libc's build system and can be ignored

# by the casual user.

FIG2DEV                 = fig2dev

EXTRA_CLEAN_FILES       = *.hex *.bin *.srec

dox: eps png pdf

eps: $(PRG).eps

png: $(PRG).png

pdf: $(PRG).pdf

%.eps: %.fig

	$(FIG2DEV) -L eps $< $@

%.pdf: %.fig

	$(FIG2DEV) -L pdf $< $@

%.png: %.fig

	$(FIG2DEV) -L png $< $@