WebSVN – HomeAutomation – Diff – /trunk/EmbeddedSoftware/AVR/Can2Serial/makefile


# Hey Emacs, this is a -*- makefile -*-
#
# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.
# Released to the Public Domain
# Please read the make user manual!
#
# Additional material for this makefile was submitted by:
#  Tim Henigan
#  Peter Fleury
#  Reiner Patommel
#  Sander Pool
#  Frederik Rouleau
#  Markus Pfaff
#
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
#
# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
#                4.07 or greater).
#
# make program = Download the hex file to the device, using avrdude.  Please
#                customize the avrdude settings below first!
#
# make filename.s = Just compile filename.c into the assembler code only
#
# To rebuild project do "make clean" then "make all".
#
 
########
# Differences from WinAVR 20040720 sample:
# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
# - F_OSC Define in CFLAGS and AFLAGS
 
 
# MCU name
#MCU = atmega32
MCU = atmega8
#MCU = atmega16
 
 
# Main Oscillator Frequency
F_CPU = 9216000
##F_OSC = 1000000
##F_OSC = 1843200
##F_OSC = 2000000
##F_OSC = 3686400
##F_OSC = 4000000
##F_OSC = 8000000
##F_OSC = 11059200
##F_OSC = 16000000
 
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
 
 
# Target file name (without extension).
TARGET = main
 
LIBDIR = ../lib/src/
 
 
# List C source files here. (C dependencies are automatically generated.)
SRC =	$(TARGET).c\
		$(LIBDIR)mcu/serial.c\
		$(LIBDIR)mcu/uart.c\
		$(LIBDIR)mcu/timebase.c\
		$(LIBDIR)mcu/mcu.c\
		$(LIBDIR)can/can.c\
		$(LIBDIR)can/mcp2515/mcp2515.c
 
# List Assembler source files here.
# Make them always end in a capital .S.  Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = 
 
 
# Optimization level, can be [0, 1, 2, 3, s]. 
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
#OPT = 3
 
# Debugging format.
# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
#DEBUG = stabs
DEBUG = dwarf-2
 
# List any extra directories to look for include files here.
#     Each directory must be seperated by a space.
EXTRAINCDIRS = $(LIBDIR)/can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu
 
# Compiler flag to set the C Standard level.
# c89   - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99   - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
 
# Place -D or -U options here
CDEFS =
 
# Place -I options here
CINCS =
 
 
# Compiler flags.
#  -g*:          generate debugging information
#  -O*:          optimization level
#  -f...:        tuning, see GCC manual and avr-libc documentation
#  -Wall...:     warning level
#  -Wa,...:      tell GCC to pass this to the assembler.
#    -adhlns...: create assembler listing
CFLAGS = 
#CFLAGS += -g$(DEBUG)
CFLAGS += $(CDEFS) $(CINCS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wstrict-prototypes
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
CFLAGS += -DF_CPU=$(F_CPU)
 
 
 
# Assembler flags.
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing
#  -gstabs:   have the assembler create line number information; note that
#             for use in COFF files, additional information about filenames
#             and function names needs to be present in the assembler source
#             files -- see avr-libc docs [FIXME: not yet described there]
##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
ASFLAGS += -DF_OSC=$(F_OSC)
 
 
#Additional libraries.
 
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
PRINTF_LIB = 
 
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
SCANF_LIB = 
 
MATH_LIB = -lm
 
# External memory options
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
 
EXTMEMOPTS =
 
# Linker flags.
#  -Wl,...:     tell GCC to pass this to linker.
#    -Map:      create map file
#    --cref:    add cross reference to  map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 
 
 
 
# Programming support using avrdude. Settings and variables.
 
# Programming hardware: alf avr910 avrisp bascom bsd 
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = avr910
 
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = /dev/ttyS0    # programmer connected to serial device
AVRDUDE_BAUD = 115200
 
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 
 
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
 
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
 
# Increase verbosity level.  Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
 
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 
 
 
# ---------------------------------------------------------------------------
 
# Define directories, if needed.
DIRAVR = c:/progra~1/winavr
DIRAVRBIN = $(DIRAVR)/bin
DIRAVRUTILS = $(DIRAVR)/utils/bin
DIRINC = .
DIRLIB = $(DIRAVR)/avr/lib
 
 
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
COPY = cp
 
 
 
 
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = --------  end  --------
MSG_SIZE_BEFORE = Size before: 
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
 
 
 
 
# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
 
# Define all listing files.
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
 
 
# Compiler flags to generate dependency files.
### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
 
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 
 
 
# Default target.
all: begin gccversion sizebefore build sizeafter finished end
 
build: elf hex eep lss sym
 
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss 
sym: $(TARGET).sym
 
 
 
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
	@echo
	@echo $(MSG_BEGIN)
 
finished:
	@echo $(MSG_ERRORS_NONE)
 
end:
	@echo $(MSG_END)
	@echo
 
 
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf
sizebefore:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
 
sizeafter:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
 
 
 
# Display compiler version information.
gccversion : 
	@$(CC) --version
 
 
 
# Program the device.  
program: $(TARGET).hex $(TARGET).eep
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
#programlock: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
 
#programinit: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
 
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .data-0x800000 \
--change-section-address .bss-0x800000 \
--change-section-address .noinit-0x800000 \
--change-section-address .eeprom-0x810000 
 
 
coff: $(TARGET).elf
	@echo
	@echo $(MSG_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 
 
extcoff: $(TARGET).elf
	@echo
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 
 
 
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
	@echo
	@echo $(MSG_FLASH) $@
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 
%.eep: %.elf
	@echo
	@echo $(MSG_EEPROM) $@
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
# Create extended listing file from ELF output file.
%.lss: %.elf
	@echo
	@echo $(MSG_EXTENDED_LISTING) $@
	$(OBJDUMP) -h -S $< > $@
 
# Create a symbol table from ELF output file.
%.sym: %.elf
	@echo
	@echo $(MSG_SYMBOL_TABLE) $@
	$(NM) -n $< > $@
 
 
 
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
	@echo
	@echo $(MSG_LINKING) $@
	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
 
 
# Compile: create object files from C source files.
%.o : %.c
	@echo
	@echo $(MSG_COMPILING) $<
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
 
 
# Compile: create assembler files from C source files.
%.s : %.c
	$(CC) -S $(ALL_CFLAGS) $< -o $@
 
 
# Assemble: create object files from assembler source files.
%.o : %.S
	@echo
	@echo $(MSG_ASSEMBLING) $<
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
 
 
 
# Target: clean project.
clean: begin clean_list finished end
 
clean_list :
	@echo
	@echo $(MSG_CLEANING)
	$(REMOVE) $(TARGET).hex
	$(REMOVE) $(TARGET).eep
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).cof
	$(REMOVE) $(TARGET).elf
	$(REMOVE) $(TARGET).map
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).a90
	$(REMOVE) $(TARGET).sym
	$(REMOVE) $(TARGET).lnk
	$(REMOVE) $(TARGET).lss
	$(REMOVE) $(OBJ)
	$(REMOVE) $(LST)
	$(REMOVE) $(SRC:.c=.s)
	$(REMOVE) $(SRC:.c=.d)
	$(REMOVE) .dep/*
 
 
 
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 
 
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list program programlock programinit
 

Rev 149	Rev 356
1	# Hey Emacs, this is a -- makefile --	1	# Hey Emacs, this is a -- makefile --
2	#	2	#
3	# WinAVR makefile written by Eric B. Weddington, ~~Jörg~~ Wunsch, et al.	3	# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.
4	# Released to the Public Domain	4	# Released to the Public Domain
5	# Please read the make user manual!	5	# Please read the make user manual!
6	#	6	#
7	# Additional material for this makefile was submitted by:	7	# Additional material for this makefile was submitted by:
8	# Tim Henigan	8	# Tim Henigan
9	# Peter Fleury	9	# Peter Fleury
10	# Reiner Patommel	10	# Reiner Patommel
11	# Sander Pool	11	# Sander Pool
12	# Frederik Rouleau	12	# Frederik Rouleau
13	# Markus Pfaff	13	# Markus Pfaff
14	#	14	#
15	# On command line:	15	# On command line:
16	#	16	#
17	# make all = Make software.	17	# make all = Make software.
18	#	18	#
19	# make clean = Clean out built project files.	19	# make clean = Clean out built project files.
20	#	20	#
21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).	21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
22	#	22	#
23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio	23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
24	# 4.07 or greater).	24	# 4.07 or greater).
25	#	25	#
26	# make program = Download the hex file to the device, using avrdude. Please	26	# make program = Download the hex file to the device, using avrdude. Please
27	# customize the avrdude settings below first!	27	# customize the avrdude settings below first!
28	#	28	#
29	# make filename.s = Just compile filename.c into the assembler code only	29	# make filename.s = Just compile filename.c into the assembler code only
30	#	30	#
31	# To rebuild project do "make clean" then "make all".	31	# To rebuild project do "make clean" then "make all".
32	#	32	#
33		33
34	########	34	########
35	# Differences from WinAVR 20040720 sample:	35	# Differences from WinAVR 20040720 sample:
36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)	36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
37	# - F_OSC Define in CFLAGS and AFLAGS	37	# - F_OSC Define in CFLAGS and AFLAGS
38		38
39		39
40	# MCU name	40	# MCU name
41	#MCU = atmega32	41	#MCU = atmega32
42	MCU = atmega8	42	MCU = atmega8
43	#MCU = atmega16	43	#MCU = atmega16
44		44
45		45
46	# Main Oscillator Frequency	46	# Main Oscillator Frequency
-		47	F_CPU = 9216000
47	##F_OSC = 1000000	48	##F_OSC = 1000000
48	##F_OSC = 1843200	49	##F_OSC = 1843200
49	##F_OSC = 2000000	50	##F_OSC = 2000000
50	##F_OSC = 3686400	51	##F_OSC = 3686400
51	##F_OSC = 4000000	52	##F_OSC = 4000000
52	##F_OSC = 8000000	53	##F_OSC = 8000000
53	~~F_OSC~~ = 11059200	54	##F_OSC = 11059200
54	##F_OSC = 16000000	55	##F_OSC = 16000000
55		56
56	# Output format. (can be srec, ihex, binary)	57	# Output format. (can be srec, ihex, binary)
57	FORMAT = ihex	58	FORMAT = ihex
58		59
59		60
60	# Target file name (without extension).	61	# Target file name (without extension).
61	TARGET = main	62	TARGET = main
62		63
63	LIBDIR = ../lib/src/	64	LIBDIR = ../lib/src/
64		65
65		66
66	# List C source files here. (C dependencies are automatically generated.)	67	# List C source files here. (C dependencies are automatically generated.)
67	SRC = $(TARGET).c\	68	SRC = $(TARGET).c\
68	$(LIBDIR)mcu/serial.c\	69	$(LIBDIR)mcu/serial.c\
69	$(LIBDIR)mcu/uart.c\	70	$(LIBDIR)mcu/uart.c\
70	$(LIBDIR)mcu/timebase.c\	71	$(LIBDIR)mcu/timebase.c\
71	$(LIBDIR)mcu/mcu.c\	72	$(LIBDIR)mcu/mcu.c\
72	$(LIBDIR)can/can.c\	73	$(LIBDIR)can/can.c\
73	$(LIBDIR)can/mcp2515/mcp2515.c	74	$(LIBDIR)can/mcp2515/mcp2515.c
74		75
75	# List Assembler source files here.	76	# List Assembler source files here.
76	# Make them always end in a capital .S. Files ending in a lowercase .s	77	# Make them always end in a capital .S. Files ending in a lowercase .s
77	# will not be considered source files but generated files (assembler	78	# will not be considered source files but generated files (assembler
78	# output from the compiler), and will be deleted upon "make clean"!	79	# output from the compiler), and will be deleted upon "make clean"!
79	# Even though the DOS/Win* filesystem matches both .s and .S the same,	80	# Even though the DOS/Win* filesystem matches both .s and .S the same,
80	# it will preserve the spelling of the filenames, and gcc itself does	81	# it will preserve the spelling of the filenames, and gcc itself does
81	# care about how the name is spelled on its command-line.	82	# care about how the name is spelled on its command-line.
82	ASRC =	83	ASRC =
83		84
84		85
85	# Optimization level, can be [0, 1, 2, 3, s].	86	# Optimization level, can be [0, 1, 2, 3, s].
86	# 0 = turn off optimization. s = optimize for size.	87	# 0 = turn off optimization. s = optimize for size.
87	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)	88	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
88	OPT = s	89	OPT = s
89	#OPT = 3	90	#OPT = 3
90		91
91	# Debugging format.	92	# Debugging format.
92	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.	93	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
93	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.	94	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
94	#DEBUG = stabs	95	#DEBUG = stabs
95	DEBUG = dwarf-2	96	DEBUG = dwarf-2
96		97
97	# List any extra directories to look for include files here.	98	# List any extra directories to look for include files here.
98	# Each directory must be seperated by a space.	99	# Each directory must be seperated by a space.
99	EXTRAINCDIRS = $(LIBDIR)/can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu	100	EXTRAINCDIRS = $(LIBDIR)/can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu
100		101
101	# Compiler flag to set the C Standard level.	102	# Compiler flag to set the C Standard level.
102	# c89 - "ANSI" C	103	# c89 - "ANSI" C
103	# gnu89 - c89 plus GCC extensions	104	# gnu89 - c89 plus GCC extensions
104	# c99 - ISO C99 standard (not yet fully implemented)	105	# c99 - ISO C99 standard (not yet fully implemented)
105	# gnu99 - c99 plus GCC extensions	106	# gnu99 - c99 plus GCC extensions
106	CSTANDARD = -std=gnu99	107	CSTANDARD = -std=gnu99
107		108
108	# Place -D or -U options here	109	# Place -D or -U options here
109	CDEFS =	110	CDEFS =
110		111
111	# Place -I options here	112	# Place -I options here
112	CINCS =	113	CINCS =
113		114
114		115
115	# Compiler flags.	116	# Compiler flags.
116	# -g*: generate debugging information	117	# -g*: generate debugging information
117	# -O*: optimization level	118	# -O*: optimization level
118	# -f...: tuning, see GCC manual and avr-libc documentation	119	# -f...: tuning, see GCC manual and avr-libc documentation
119	# -Wall...: warning level	120	# -Wall...: warning level
120	# -Wa,...: tell GCC to pass this to the assembler.	121	# -Wa,...: tell GCC to pass this to the assembler.
121	# -adhlns...: create assembler listing	122	# -adhlns...: create assembler listing
122	CFLAGS =	123	CFLAGS =
123	#CFLAGS += -g$(DEBUG)	124	#CFLAGS += -g$(DEBUG)
124	CFLAGS += $(CDEFS) $(CINCS)	125	CFLAGS += $(CDEFS) $(CINCS)
125	CFLAGS += -O$(OPT)	126	CFLAGS += -O$(OPT)
126	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums	127	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
127	CFLAGS += -Wall -Wstrict-prototypes	128	CFLAGS += -Wall -Wstrict-prototypes
128	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)	129	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
129	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))	130	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
130	CFLAGS += $(CSTANDARD)	131	CFLAGS += $(CSTANDARD)
131	CFLAGS += -~~DF_OSC=$~~(~~F_OSC~~)	132	CFLAGS += -DF_CPU=$(F_CPU)
132		133
133		134
134		135
135	# Assembler flags.	136	# Assembler flags.
136	# -Wa,...: tell GCC to pass this to the assembler.	137	# -Wa,...: tell GCC to pass this to the assembler.
137	# -ahlms: create listing	138	# -ahlms: create listing
138	# -gstabs: have the assembler create line number information; note that	139	# -gstabs: have the assembler create line number information; note that
139	# for use in COFF files, additional information about filenames	140	# for use in COFF files, additional information about filenames
140	# and function names needs to be present in the assembler source	141	# and function names needs to be present in the assembler source
141	# files -- see avr-libc docs [FIXME: not yet described there]	142	# files -- see avr-libc docs [FIXME: not yet described there]
142	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs	143	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
143	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)	144	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
144	ASFLAGS += -DF_OSC=$(F_OSC)	145	ASFLAGS += -DF_OSC=$(F_OSC)
145		146
146		147
147	#Additional libraries.	148	#Additional libraries.
148		149
149	# Minimalistic printf version	150	# Minimalistic printf version
150	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min	151	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
151		152
152	# Floating point printf version (requires MATH_LIB = -lm below)	153	# Floating point printf version (requires MATH_LIB = -lm below)
153	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt	154	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
154		155
155	PRINTF_LIB =	156	PRINTF_LIB =
156		157
157	# Minimalistic scanf version	158	# Minimalistic scanf version
158	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min	159	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
159		160
160	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)	161	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
161	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt	162	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
162		163
163	SCANF_LIB =	164	SCANF_LIB =
164		165
165	MATH_LIB = -lm	166	MATH_LIB = -lm
166		167
167	# External memory options	168	# External memory options
168		169
169	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	170	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
170	# used for variables (.data/.bss) and heap (malloc()).	171	# used for variables (.data/.bss) and heap (malloc()).
171	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff	172	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
172		173
173	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	174	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
174	# only used for heap (malloc()).	175	# only used for heap (malloc()).
175	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff	176	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
176		177
177	EXTMEMOPTS =	178	EXTMEMOPTS =
178		179
179	# Linker flags.	180	# Linker flags.
180	# -Wl,...: tell GCC to pass this to linker.	181	# -Wl,...: tell GCC to pass this to linker.
181	# -Map: create map file	182	# -Map: create map file
182	# --cref: add cross reference to map file	183	# --cref: add cross reference to map file
183	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref	184	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
184	LDFLAGS += $(EXTMEMOPTS)	185	LDFLAGS += $(EXTMEMOPTS)
185	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)	186	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
186		187
187		188
188		189
189		190
190	# Programming support using avrdude. Settings and variables.	191	# Programming support using avrdude. Settings and variables.
191		192
192	# Programming hardware: alf avr910 avrisp bascom bsd	193	# Programming hardware: alf avr910 avrisp bascom bsd
193	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500	194	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
194	#	195	#
195	# Type: avrdude -c ?	196	# Type: avrdude -c ?
196	# to get a full listing.	197	# to get a full listing.
197	#	198	#
198	AVRDUDE_PROGRAMMER = ~~avrispv2~~	199	AVRDUDE_PROGRAMMER = avr910
199		200
200	# com1 = serial port. Use lpt1 to connect to parallel port.	201	# com1 = serial port. Use lpt1 to connect to parallel port.
201	AVRDUDE_PORT = ~~com1~~ # programmer connected to serial device	202	AVRDUDE_PORT = /dev/ttyS0 # programmer connected to serial device
202	AVRDUDE_BAUD = 115200	203	AVRDUDE_BAUD = 115200
203		204
204	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex	205	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
205	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep	206	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
206		207
207		208
208	# Uncomment the following if you want avrdude's erase cycle counter.	209	# Uncomment the following if you want avrdude's erase cycle counter.
209	# Note that this counter needs to be initialized first using -Yn,	210	# Note that this counter needs to be initialized first using -Yn,
210	# see avrdude manual.	211	# see avrdude manual.
211	#AVRDUDE_ERASE_COUNTER = -y	212	#AVRDUDE_ERASE_COUNTER = -y
212		213
213	# Uncomment the following if you do /not/ wish a verification to be	214	# Uncomment the following if you do /not/ wish a verification to be
214	# performed after programming the device.	215	# performed after programming the device.
215	#AVRDUDE_NO_VERIFY = -V	216	#AVRDUDE_NO_VERIFY = -V
216		217
217	# Increase verbosity level. Please use this when submitting bug	218	# Increase verbosity level. Please use this when submitting bug
218	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>	219	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
219	# to submit bug reports.	220	# to submit bug reports.
220	#AVRDUDE_VERBOSE = -v -v	221	#AVRDUDE_VERBOSE = -v -v
221		222
222	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)	223	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
223	AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)	224	AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
224	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)	225	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
225	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)	226	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
226		227
227		228
228		229
229	# ---------------------------------------------------------------------------	230	# ---------------------------------------------------------------------------
230		231
231	# Define directories, if needed.	232	# Define directories, if needed.
232	DIRAVR = c:/progra~1/winavr	233	DIRAVR = c:/progra~1/winavr
233	DIRAVRBIN = $(DIRAVR)/bin	234	DIRAVRBIN = $(DIRAVR)/bin
234	DIRAVRUTILS = $(DIRAVR)/utils/bin	235	DIRAVRUTILS = $(DIRAVR)/utils/bin
235	DIRINC = .	236	DIRINC = .
236	DIRLIB = $(DIRAVR)/avr/lib	237	DIRLIB = $(DIRAVR)/avr/lib
237		238
238		239
239	# Define programs and commands.	240	# Define programs and commands.
240	SHELL = sh	241	SHELL = sh
241	CC = avr-gcc	242	CC = avr-gcc
242	OBJCOPY = avr-objcopy	243	OBJCOPY = avr-objcopy
243	OBJDUMP = avr-objdump	244	OBJDUMP = avr-objdump
244	SIZE = avr-size	245	SIZE = avr-size
245	NM = avr-nm	246	NM = avr-nm
246	AVRDUDE = avrdude	247	AVRDUDE = avrdude
247	REMOVE = rm -f	248	REMOVE = rm -f
248	COPY = cp	249	COPY = cp
249		250
250		251
251		252
252		253
253	# Define Messages	254	# Define Messages
254	# English	255	# English
255	MSG_ERRORS_NONE = Errors: none	256	MSG_ERRORS_NONE = Errors: none
256	MSG_BEGIN = -------- begin --------	257	MSG_BEGIN = -------- begin --------
257	MSG_END = -------- end --------	258	MSG_END = -------- end --------
258	MSG_SIZE_BEFORE = Size before:	259	MSG_SIZE_BEFORE = Size before:
259	MSG_SIZE_AFTER = Size after:	260	MSG_SIZE_AFTER = Size after:
260	MSG_COFF = Converting to AVR COFF:	261	MSG_COFF = Converting to AVR COFF:
261	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:	262	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
262	MSG_FLASH = Creating load file for Flash:	263	MSG_FLASH = Creating load file for Flash:
263	MSG_EEPROM = Creating load file for EEPROM:	264	MSG_EEPROM = Creating load file for EEPROM:
264	MSG_EXTENDED_LISTING = Creating Extended Listing:	265	MSG_EXTENDED_LISTING = Creating Extended Listing:
265	MSG_SYMBOL_TABLE = Creating Symbol Table:	266	MSG_SYMBOL_TABLE = Creating Symbol Table:
266	MSG_LINKING = Linking:	267	MSG_LINKING = Linking:
267	MSG_COMPILING = Compiling:	268	MSG_COMPILING = Compiling:
268	MSG_ASSEMBLING = Assembling:	269	MSG_ASSEMBLING = Assembling:
269	MSG_CLEANING = Cleaning project:	270	MSG_CLEANING = Cleaning project:
270		271
271		272
272		273
273		274
274	# Define all object files.	275	# Define all object files.
275	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)	276	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
276		277
277	# Define all listing files.	278	# Define all listing files.
278	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)	279	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
279		280
280		281
281	# Compiler flags to generate dependency files.	282	# Compiler flags to generate dependency files.
282	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d	283	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
283	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d	284	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
284		285
285	# Combine all necessary flags and optional flags.	286	# Combine all necessary flags and optional flags.
286	# Add target processor to flags.	287	# Add target processor to flags.
287	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)	288	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
288	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)	289	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
289		290
290		291
291		292
292		293
293		294
294	# Default target.	295	# Default target.
295	all: begin gccversion sizebefore build sizeafter finished end	296	all: begin gccversion sizebefore build sizeafter finished end
296		297
297	build: elf hex eep lss sym	298	build: elf hex eep lss sym
298		299
299	elf: $(TARGET).elf	300	elf: $(TARGET).elf
300	hex: $(TARGET).hex	301	hex: $(TARGET).hex
301	eep: $(TARGET).eep	302	eep: $(TARGET).eep
302	lss: $(TARGET).lss	303	lss: $(TARGET).lss
303	sym: $(TARGET).sym	304	sym: $(TARGET).sym
304		305
305		306
306		307
307	# Eye candy.	308	# Eye candy.
308	# AVR Studio 3.x does not check make's exit code but relies on	309	# AVR Studio 3.x does not check make's exit code but relies on
309	# the following magic strings to be generated by the compile job.	310	# the following magic strings to be generated by the compile job.
310	begin:	311	begin:
311	@echo	312	@echo
312	@echo $(MSG_BEGIN)	313	@echo $(MSG_BEGIN)
313		314
314	finished:	315	finished:
315	@echo $(MSG_ERRORS_NONE)	316	@echo $(MSG_ERRORS_NONE)
316		317
317	end:	318	end:
318	@echo $(MSG_END)	319	@echo $(MSG_END)
319	@echo	320	@echo
320		321
321		322
322	# Display size of file.	323	# Display size of file.
323	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex	324	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
324	ELFSIZE = $(SIZE) -A $(TARGET).elf	325	ELFSIZE = $(SIZE) -A $(TARGET).elf
325	sizebefore:	326	sizebefore:
326	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi	327	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
327		328
328	sizeafter:	329	sizeafter:
329	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi	330	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
330		331
331		332
332		333
333	# Display compiler version information.	334	# Display compiler version information.
334	gccversion :	335	gccversion :
335	@$(CC) --version	336	@$(CC) --version
336		337
337		338
338		339
339	# Program the device.	340	# Program the device.
340	program: $(TARGET).hex $(TARGET).eep	341	program: $(TARGET).hex $(TARGET).eep
341	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)	342	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
342		343
343	#programlock:	344	#programlock:
344	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m	345	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
345		346
346	#programinit:	347	#programinit:
347	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m	348	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
348		349
349	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.	350	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
350	COFFCONVERT=$(OBJCOPY) --debugging \	351	COFFCONVERT=$(OBJCOPY) --debugging \
351	--change-section-address .data-0x800000 \	352	--change-section-address .data-0x800000 \
352	--change-section-address .bss-0x800000 \	353	--change-section-address .bss-0x800000 \
353	--change-section-address .noinit-0x800000 \	354	--change-section-address .noinit-0x800000 \
354	--change-section-address .eeprom-0x810000	355	--change-section-address .eeprom-0x810000
355		356
356		357
357	coff: $(TARGET).elf	358	coff: $(TARGET).elf
358	@echo	359	@echo
359	@echo $(MSG_COFF) $(TARGET).cof	360	@echo $(MSG_COFF) $(TARGET).cof
360	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof	361	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
361		362
362		363
363	extcoff: $(TARGET).elf	364	extcoff: $(TARGET).elf
364	@echo	365	@echo
365	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof	366	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
366	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof	367	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
367		368
368		369
369		370
370	# Create final output files (.hex, .eep) from ELF output file.	371	# Create final output files (.hex, .eep) from ELF output file.
371	%.hex: %.elf	372	%.hex: %.elf
372	@echo	373	@echo
373	@echo $(MSG_FLASH) $@	374	@echo $(MSG_FLASH) $@
374	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@	375	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
375		376
376	%.eep: %.elf	377	%.eep: %.elf
377	@echo	378	@echo
378	@echo $(MSG_EEPROM) $@	379	@echo $(MSG_EEPROM) $@
379	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \	380	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
380	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@	381	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
381		382
382	# Create extended listing file from ELF output file.	383	# Create extended listing file from ELF output file.
383	%.lss: %.elf	384	%.lss: %.elf
384	@echo	385	@echo
385	@echo $(MSG_EXTENDED_LISTING) $@	386	@echo $(MSG_EXTENDED_LISTING) $@
386	$(OBJDUMP) -h -S $< > $@	387	$(OBJDUMP) -h -S $< > $@
387		388
388	# Create a symbol table from ELF output file.	389	# Create a symbol table from ELF output file.
389	%.sym: %.elf	390	%.sym: %.elf
390	@echo	391	@echo
391	@echo $(MSG_SYMBOL_TABLE) $@	392	@echo $(MSG_SYMBOL_TABLE) $@
392	$(NM) -n $< > $@	393	$(NM) -n $< > $@
393		394
394		395
395		396
396	# Link: create ELF output file from object files.	397	# Link: create ELF output file from object files.
397	.SECONDARY : $(TARGET).elf	398	.SECONDARY : $(TARGET).elf
398	.PRECIOUS : $(OBJ)	399	.PRECIOUS : $(OBJ)
399	%.elf: $(OBJ)	400	%.elf: $(OBJ)
400	@echo	401	@echo
401	@echo $(MSG_LINKING) $@	402	@echo $(MSG_LINKING) $@
402	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)	403	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
403		404
404		405
405	# Compile: create object files from C source files.	406	# Compile: create object files from C source files.
406	%.o : %.c	407	%.o : %.c
407	@echo	408	@echo
408	@echo $(MSG_COMPILING) $<	409	@echo $(MSG_COMPILING) $<
409	$(CC) -c $(ALL_CFLAGS) $< -o $@	410	$(CC) -c $(ALL_CFLAGS) $< -o $@
410		411
411		412
412	# Compile: create assembler files from C source files.	413	# Compile: create assembler files from C source files.
413	%.s : %.c	414	%.s : %.c
414	$(CC) -S $(ALL_CFLAGS) $< -o $@	415	$(CC) -S $(ALL_CFLAGS) $< -o $@
415		416
416		417
417	# Assemble: create object files from assembler source files.	418	# Assemble: create object files from assembler source files.
418	%.o : %.S	419	%.o : %.S
419	@echo	420	@echo
420	@echo $(MSG_ASSEMBLING) $<	421	@echo $(MSG_ASSEMBLING) $<
421	$(CC) -c $(ALL_ASFLAGS) $< -o $@	422	$(CC) -c $(ALL_ASFLAGS) $< -o $@
422		423
423		424
424		425
425	# Target: clean project.	426	# Target: clean project.
426	clean: begin clean_list finished end	427	clean: begin clean_list finished end
427		428
428	clean_list :	429	clean_list :
429	@echo	430	@echo
430	@echo $(MSG_CLEANING)	431	@echo $(MSG_CLEANING)
431	$(REMOVE) $(TARGET).hex	432	$(REMOVE) $(TARGET).hex
432	$(REMOVE) $(TARGET).eep	433	$(REMOVE) $(TARGET).eep
433	$(REMOVE) $(TARGET).obj	434	$(REMOVE) $(TARGET).obj
434	$(REMOVE) $(TARGET).cof	435	$(REMOVE) $(TARGET).cof
435	$(REMOVE) $(TARGET).elf	436	$(REMOVE) $(TARGET).elf
436	$(REMOVE) $(TARGET).map	437	$(REMOVE) $(TARGET).map
437	$(REMOVE) $(TARGET).obj	438	$(REMOVE) $(TARGET).obj
438	$(REMOVE) $(TARGET).a90	439	$(REMOVE) $(TARGET).a90
439	$(REMOVE) $(TARGET).sym	440	$(REMOVE) $(TARGET).sym
440	$(REMOVE) $(TARGET).lnk	441	$(REMOVE) $(TARGET).lnk
441	$(REMOVE) $(TARGET).lss	442	$(REMOVE) $(TARGET).lss
442	$(REMOVE) $(OBJ)	443	$(REMOVE) $(OBJ)
443	$(REMOVE) $(LST)	444	$(REMOVE) $(LST)
444	$(REMOVE) $(SRC:.c=.s)	445	$(REMOVE) $(SRC:.c=.s)
445	$(REMOVE) $(SRC:.c=.d)	446	$(REMOVE) $(SRC:.c=.d)
446	$(REMOVE) .dep/*	447	$(REMOVE) .dep/*
447		448
448		449
449		450
450	# Include the dependency files.	451	# Include the dependency files.
451	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)	452	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
452		453
453		454
454	# Listing of phony targets.	455	# Listing of phony targets.
455	.PHONY : all begin finish end sizebefore sizeafter gccversion \	456	.PHONY : all begin finish end sizebefore sizeafter gccversion \
456	build elf hex eep lss sym coff extcoff \	457	build elf hex eep lss sym coff extcoff \
457	clean clean_list program programlock programinit	458	clean clean_list program programlock programinit
458		459

Subversion Repositories HomeAutomation

(root)/trunk/EmbeddedSoftware/AVR/Can2Serial/makefile @ 356 – Rev 149 → 356