WebSVN – HomeAutomation – Diff – /trunk/EmbeddedSoftware/AVR/CanDS18S20/makefile


# Hey Emacs, this is a -*- makefile -*-
#
# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.
# Released to the Public Domain
# Please read the make user manual!
#
# Additional material for this makefile was submitted by:
#  Tim Henigan
#  Peter Fleury
#  Reiner Patommel
#  Sander Pool
#  Frederik Rouleau
#  Markus Pfaff
#
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
#
# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
#                4.07 or greater).
#
# make program = Download the hex file to the device, using avrdude.  Please
#                customize the avrdude settings below first!
#
# make filename.s = Just compile filename.c into the assembler code only
#
# To rebuild project do "make clean" then "make all".
#
 
########
# Differences from WinAVR 20040720 sample:
# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
# - F_OSC Define in CFLAGS and AFLAGS
 
 
# MCU name
#MCU = atmega32
MCU = atmega88
#MCU = atmega16
 
 
# Main Oscillator Frequency
##F_OSC = 1000000
##F_OSC = 1843200
##F_OSC = 2000000
##F_OSC = 3686400
##F_OSC = 4000000
F_OSC = 8000000
##F_OSC = 11059200
##F_OSC = 16000000
 
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
 
 
# Target file name (without extension).
TARGET = main
 
LIBDIR = ../lib/src/
 
 
# List C source files here. (C dependencies are automatically generated.)
SRC =	$(TARGET).c\
		$(LIBDIR)temperature/ds18s20/onewire.c\
		$(LIBDIR)temperature/ds18s20/delay.c\
		$(LIBDIR)temperature/ds18s20/ds18x20.c\
		$(LIBDIR)temperature/ds18s20/crc8.c\
		$(LIBDIR)mcu/mcu.c\
		$(LIBDIR)mcu/serial.c\
		$(LIBDIR)mcu/uart.c\
		$(LIBDIR)mcu/timebase.c\
		$(LIBDIR)can/can.c\
		$(LIBDIR)can/mcp2515/mcp2515.c
 
# List Assembler source files here.
# Make them always end in a capital .S.  Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = 
 
 
# Optimization level, can be [0, 1, 2, 3, s]. 
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
#OPT = 3
 
# Debugging format.
# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
#DEBUG = stabs
DEBUG = 
 
# List any extra directories to look for include files here.
#     Each directory must be seperated by a space.
EXTRAINCDIRS = $(LIBDIR)/can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu $(LIBDIR)/temperature/ds18s20 $(LIBDIR)/../funcdefs
 
# Compiler flag to set the C Standard level.
# c89   - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99   - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
 
# Place -D or -U options here
CDEFS =
 
# Place -I options here
CINCS =
 
 
# Compiler flags.
#  -g*:          generate debugging information
#  -O*:          optimization level
#  -f...:        tuning, see GCC manual and avr-libc documentation
#  -Wall...:     warning level
#  -Wa,...:      tell GCC to pass this to the assembler.
#    -adhlns...: create assembler listing
CFLAGS = -g$(DEBUG)
CFLAGS += $(CDEFS) $(CINCS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wstrict-prototypes
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
CFLAGS += -DF_OSC=$(F_OSC)
 
 
 
# Assembler flags.
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing
#  -gstabs:   have the assembler create line number information; note that
#             for use in COFF files, additional information about filenames
#             and function names needs to be present in the assembler source
#             files -- see avr-libc docs [FIXME: not yet described there]
##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
ASFLAGS += -DF_OSC=$(F_OSC)
 
 
#Additional libraries.
 
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
PRINTF_LIB = 
 
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
SCANF_LIB = 
 
MATH_LIB = -lm
 
# External memory options
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
 
EXTMEMOPTS =
 
# Linker flags.
#  -Wl,...:     tell GCC to pass this to linker.
#    -Map:      create map file
#    --cref:    add cross reference to  map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 
 
 
 
# Programming support using avrdude. Settings and variables.
 
# Programming hardware: alf avr910 avrisp bascom bsd 
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = avrispv2
 
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = /dev/ttyUSB0    # programmer connected to serial device
 
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 
 
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
 
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
 
# Increase verbosity level.  Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
#-b $(AVRDUDE_BAUD)
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) 
#AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 
 
 
# ---------------------------------------------------------------------------
 
# Define directories, if needed.
DIRAVR = c:/progra~1/winavr
DIRAVRBIN = $(DIRAVR)/bin
DIRAVRUTILS = $(DIRAVR)/utils/bin
DIRINC = .
DIRLIB = $(DIRAVR)/avr/lib
 
 
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
COPY = cp
 
 
 
 
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = --------  end  --------
MSG_SIZE_BEFORE = Size before: 
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
 
 
 
 
# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
 
# Define all listing files.
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
 
 
# Compiler flags to generate dependency files.
### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
 
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 
 
 
# Default target.
all: begin gccversion sizebefore build sizeafter finished end
 
build: elf hex eep lss sym
 
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss 
sym: $(TARGET).sym
 
 
 
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
	@echo
	@echo $(MSG_BEGIN)
 
finished:
	@echo $(MSG_ERRORS_NONE)
 
end:
	@echo $(MSG_END)
	@echo
 
 
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf
sizebefore:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
 
sizeafter:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
 
 
 
# Display compiler version information.
gccversion : 
	@$(CC) --version
 
 
 
# Program the device.  
program: $(TARGET).hex $(TARGET).eep
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
#programlock: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
 
#programinit: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
 
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .data-0x800000 \
--change-section-address .bss-0x800000 \
--change-section-address .noinit-0x800000 \
--change-section-address .eeprom-0x810000 
 
 
coff: $(TARGET).elf
	@echo
	@echo $(MSG_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 
 
extcoff: $(TARGET).elf
	@echo
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 
 
 
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
	@echo
	@echo $(MSG_FLASH) $@
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 
%.eep: %.elf
	@echo
	@echo $(MSG_EEPROM) $@
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
# Create extended listing file from ELF output file.
%.lss: %.elf
	@echo
	@echo $(MSG_EXTENDED_LISTING) $@
	$(OBJDUMP) -h -S $< > $@
 
# Create a symbol table from ELF output file.
%.sym: %.elf
	@echo
	@echo $(MSG_SYMBOL_TABLE) $@
	$(NM) -n $< > $@
 
 
 
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
	@echo
	@echo $(MSG_LINKING) $@
	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
 
 
# Compile: create object files from C source files.
%.o : %.c
	@echo
	@echo $(MSG_COMPILING) $<
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
 
 
# Compile: create assembler files from C source files.
%.s : %.c
	$(CC) -S $(ALL_CFLAGS) $< -o $@
 
 
# Assemble: create object files from assembler source files.
%.o : %.S
	@echo
	@echo $(MSG_ASSEMBLING) $<
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
 
 
 
# Target: clean project.
clean: begin clean_list finished end
 
clean_list :
	@echo
	@echo $(MSG_CLEANING)
	$(REMOVE) $(TARGET).hex
	$(REMOVE) $(TARGET).eep
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).cof
	$(REMOVE) $(TARGET).elf
	$(REMOVE) $(TARGET).map
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).a90
	$(REMOVE) $(TARGET).sym
	$(REMOVE) $(TARGET).lnk
	$(REMOVE) $(TARGET).lss
	$(REMOVE) $(OBJ)
	$(REMOVE) $(LST)
	$(REMOVE) $(SRC:.c=.s)
	$(REMOVE) $(SRC:.c=.d)
	$(REMOVE) .dep/*
 
 
 
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 
 
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list program programlock programinit
 

Rev 153	Rev 167
1	# Hey Emacs, this is a -- makefile --	1	# Hey Emacs, this is a -- makefile --
2	#	2	#
3	# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.	3	# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.
4	# Released to the Public Domain	4	# Released to the Public Domain
5	# Please read the make user manual!	5	# Please read the make user manual!
6	#	6	#
7	# Additional material for this makefile was submitted by:	7	# Additional material for this makefile was submitted by:
8	# Tim Henigan	8	# Tim Henigan
9	# Peter Fleury	9	# Peter Fleury
10	# Reiner Patommel	10	# Reiner Patommel
11	# Sander Pool	11	# Sander Pool
12	# Frederik Rouleau	12	# Frederik Rouleau
13	# Markus Pfaff	13	# Markus Pfaff
14	#	14	#
15	# On command line:	15	# On command line:
16	#	16	#
17	# make all = Make software.	17	# make all = Make software.
18	#	18	#
19	# make clean = Clean out built project files.	19	# make clean = Clean out built project files.
20	#	20	#
21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).	21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
22	#	22	#
23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio	23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
24	# 4.07 or greater).	24	# 4.07 or greater).
25	#	25	#
26	# make program = Download the hex file to the device, using avrdude. Please	26	# make program = Download the hex file to the device, using avrdude. Please
27	# customize the avrdude settings below first!	27	# customize the avrdude settings below first!
28	#	28	#
29	# make filename.s = Just compile filename.c into the assembler code only	29	# make filename.s = Just compile filename.c into the assembler code only
30	#	30	#
31	# To rebuild project do "make clean" then "make all".	31	# To rebuild project do "make clean" then "make all".
32	#	32	#
33		33
34	########	34	########
35	# Differences from WinAVR 20040720 sample:	35	# Differences from WinAVR 20040720 sample:
36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)	36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
37	# - F_OSC Define in CFLAGS and AFLAGS	37	# - F_OSC Define in CFLAGS and AFLAGS
38		38
39		39
40	# MCU name	40	# MCU name
41	#MCU = atmega32	41	#MCU = atmega32
42	MCU = ~~atmega8~~	42	MCU = atmega88
43	#MCU = atmega16	43	#MCU = atmega16
44		44
45		45
46	# Main Oscillator Frequency	46	# Main Oscillator Frequency
47	##F_OSC = 1000000	47	##F_OSC = 1000000
48	##F_OSC = 1843200	48	##F_OSC = 1843200
49	##F_OSC = 2000000	49	##F_OSC = 2000000
50	##F_OSC = 3686400	50	##F_OSC = 3686400
51	##F_OSC = 4000000	51	##F_OSC = 4000000
52	F_OSC = 8000000	52	F_OSC = 8000000
53	##F_OSC = 11059200	53	##F_OSC = 11059200
54	##F_OSC = 16000000	54	##F_OSC = 16000000
55		55
56	# Output format. (can be srec, ihex, binary)	56	# Output format. (can be srec, ihex, binary)
57	FORMAT = ihex	57	FORMAT = ihex
58		58
59		59
60	# Target file name (without extension).	60	# Target file name (without extension).
61	TARGET = main	61	TARGET = main
62		62
63	LIBDIR = ../lib/src/	63	LIBDIR = ../lib/src/
64		64
65		65
66	# List C source files here. (C dependencies are automatically generated.)	66	# List C source files here. (C dependencies are automatically generated.)
67	SRC = $(TARGET).c\	67	SRC = $(TARGET).c\
68	$(LIBDIR)temperature/ds18s20/onewire.c\	68	$(LIBDIR)temperature/ds18s20/onewire.c\
69	$(LIBDIR)temperature/ds18s20/delay.c\	69	$(LIBDIR)temperature/ds18s20/delay.c\
70	$(LIBDIR)temperature/ds18s20/ds18x20.c\	70	$(LIBDIR)temperature/ds18s20/ds18x20.c\
71	$(LIBDIR)temperature/ds18s20/crc8.c\	71	$(LIBDIR)temperature/ds18s20/crc8.c\
72	$(LIBDIR)mcu/mcu.c\	72	$(LIBDIR)mcu/mcu.c\
73	$(LIBDIR)mcu/serial.c\	73	$(LIBDIR)mcu/serial.c\
74	$(LIBDIR)mcu/uart.c\	74	$(LIBDIR)mcu/uart.c\
75	$(LIBDIR)mcu/timebase.c\	75	$(LIBDIR)mcu/timebase.c\
76	$(LIBDIR)can/can.c\	76	$(LIBDIR)can/can.c\
77	$(LIBDIR)can/mcp2515/mcp2515.c	77	$(LIBDIR)can/mcp2515/mcp2515.c
78		78
79	# List Assembler source files here.	79	# List Assembler source files here.
80	# Make them always end in a capital .S. Files ending in a lowercase .s	80	# Make them always end in a capital .S. Files ending in a lowercase .s
81	# will not be considered source files but generated files (assembler	81	# will not be considered source files but generated files (assembler
82	# output from the compiler), and will be deleted upon "make clean"!	82	# output from the compiler), and will be deleted upon "make clean"!
83	# Even though the DOS/Win* filesystem matches both .s and .S the same,	83	# Even though the DOS/Win* filesystem matches both .s and .S the same,
84	# it will preserve the spelling of the filenames, and gcc itself does	84	# it will preserve the spelling of the filenames, and gcc itself does
85	# care about how the name is spelled on its command-line.	85	# care about how the name is spelled on its command-line.
86	ASRC =	86	ASRC =
87		87
88		88
89	# Optimization level, can be [0, 1, 2, 3, s].	89	# Optimization level, can be [0, 1, 2, 3, s].
90	# 0 = turn off optimization. s = optimize for size.	90	# 0 = turn off optimization. s = optimize for size.
91	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)	91	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
92	OPT = s	92	OPT = s
93	#OPT = 3	93	#OPT = 3
94		94
95	# Debugging format.	95	# Debugging format.
96	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.	96	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
97	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.	97	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
98	#DEBUG = stabs	98	#DEBUG = stabs
99	DEBUG =	99	DEBUG =
100		100
101	# List any extra directories to look for include files here.	101	# List any extra directories to look for include files here.
102	# Each directory must be seperated by a space.	102	# Each directory must be seperated by a space.
103	EXTRAINCDIRS = $(LIBDIR)/can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu $(LIBDIR)/temperature/ds18s20	103	EXTRAINCDIRS = $(LIBDIR)/can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu $(LIBDIR)/temperature/ds18s20 $(LIBDIR)/../funcdefs
104		104
105	# Compiler flag to set the C Standard level.	105	# Compiler flag to set the C Standard level.
106	# c89 - "ANSI" C	106	# c89 - "ANSI" C
107	# gnu89 - c89 plus GCC extensions	107	# gnu89 - c89 plus GCC extensions
108	# c99 - ISO C99 standard (not yet fully implemented)	108	# c99 - ISO C99 standard (not yet fully implemented)
109	# gnu99 - c99 plus GCC extensions	109	# gnu99 - c99 plus GCC extensions
110	CSTANDARD = -std=gnu99	110	CSTANDARD = -std=gnu99
111		111
112	# Place -D or -U options here	112	# Place -D or -U options here
113	CDEFS =	113	CDEFS =
114		114
115	# Place -I options here	115	# Place -I options here
116	CINCS =	116	CINCS =
117		117
118		118
119	# Compiler flags.	119	# Compiler flags.
120	# -g*: generate debugging information	120	# -g*: generate debugging information
121	# -O*: optimization level	121	# -O*: optimization level
122	# -f...: tuning, see GCC manual and avr-libc documentation	122	# -f...: tuning, see GCC manual and avr-libc documentation
123	# -Wall...: warning level	123	# -Wall...: warning level
124	# -Wa,...: tell GCC to pass this to the assembler.	124	# -Wa,...: tell GCC to pass this to the assembler.
125	# -adhlns...: create assembler listing	125	# -adhlns...: create assembler listing
126	CFLAGS = -g$(DEBUG)	126	CFLAGS = -g$(DEBUG)
127	CFLAGS += $(CDEFS) $(CINCS)	127	CFLAGS += $(CDEFS) $(CINCS)
128	CFLAGS += -O$(OPT)	128	CFLAGS += -O$(OPT)
129	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums	129	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
130	CFLAGS += -Wall -Wstrict-prototypes	130	CFLAGS += -Wall -Wstrict-prototypes
131	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)	131	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
132	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))	132	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
133	CFLAGS += $(CSTANDARD)	133	CFLAGS += $(CSTANDARD)
134	CFLAGS += -DF_OSC=$(F_OSC)	134	CFLAGS += -DF_OSC=$(F_OSC)
135		135
136		136
137		137
138	# Assembler flags.	138	# Assembler flags.
139	# -Wa,...: tell GCC to pass this to the assembler.	139	# -Wa,...: tell GCC to pass this to the assembler.
140	# -ahlms: create listing	140	# -ahlms: create listing
141	# -gstabs: have the assembler create line number information; note that	141	# -gstabs: have the assembler create line number information; note that
142	# for use in COFF files, additional information about filenames	142	# for use in COFF files, additional information about filenames
143	# and function names needs to be present in the assembler source	143	# and function names needs to be present in the assembler source
144	# files -- see avr-libc docs [FIXME: not yet described there]	144	# files -- see avr-libc docs [FIXME: not yet described there]
145	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs	145	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
146	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)	146	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
147	ASFLAGS += -DF_OSC=$(F_OSC)	147	ASFLAGS += -DF_OSC=$(F_OSC)
148		148
149		149
150	#Additional libraries.	150	#Additional libraries.
151		151
152	# Minimalistic printf version	152	# Minimalistic printf version
153	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min	153	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
154		154
155	# Floating point printf version (requires MATH_LIB = -lm below)	155	# Floating point printf version (requires MATH_LIB = -lm below)
156	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt	156	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
157		157
158	PRINTF_LIB =	158	PRINTF_LIB =
159		159
160	# Minimalistic scanf version	160	# Minimalistic scanf version
161	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min	161	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
162		162
163	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)	163	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
164	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt	164	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
165		165
166	SCANF_LIB =	166	SCANF_LIB =
167		167
168	MATH_LIB = -lm	168	MATH_LIB = -lm
169		169
170	# External memory options	170	# External memory options
171		171
172	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	172	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
173	# used for variables (.data/.bss) and heap (malloc()).	173	# used for variables (.data/.bss) and heap (malloc()).
174	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff	174	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
175		175
176	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	176	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
177	# only used for heap (malloc()).	177	# only used for heap (malloc()).
178	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff	178	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
179		179
180	EXTMEMOPTS =	180	EXTMEMOPTS =
181		181
182	# Linker flags.	182	# Linker flags.
183	# -Wl,...: tell GCC to pass this to linker.	183	# -Wl,...: tell GCC to pass this to linker.
184	# -Map: create map file	184	# -Map: create map file
185	# --cref: add cross reference to map file	185	# --cref: add cross reference to map file
186	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref	186	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
187	LDFLAGS += $(EXTMEMOPTS)	187	LDFLAGS += $(EXTMEMOPTS)
188	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)	188	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
189		189
190		190
191		191
192		192
193	# Programming support using avrdude. Settings and variables.	193	# Programming support using avrdude. Settings and variables.
194		194
195	# Programming hardware: alf avr910 avrisp bascom bsd	195	# Programming hardware: alf avr910 avrisp bascom bsd
196	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500	196	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
197	#	197	#
198	# Type: avrdude -c ?	198	# Type: avrdude -c ?
199	# to get a full listing.	199	# to get a full listing.
200	#	200	#
201	AVRDUDE_PROGRAMMER = avrispv2	201	AVRDUDE_PROGRAMMER = avrispv2
202		202
203	# com1 = serial port. Use lpt1 to connect to parallel port.	203	# com1 = serial port. Use lpt1 to connect to parallel port.
204	AVRDUDE_PORT = /dev/ttyUSB0 # programmer connected to serial device	204	AVRDUDE_PORT = /dev/ttyUSB0 # programmer connected to serial device
205		205
206	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex	206	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
207	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep	207	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
208		208
209		209
210	# Uncomment the following if you want avrdude's erase cycle counter.	210	# Uncomment the following if you want avrdude's erase cycle counter.
211	# Note that this counter needs to be initialized first using -Yn,	211	# Note that this counter needs to be initialized first using -Yn,
212	# see avrdude manual.	212	# see avrdude manual.
213	#AVRDUDE_ERASE_COUNTER = -y	213	#AVRDUDE_ERASE_COUNTER = -y
214		214
215	# Uncomment the following if you do /not/ wish a verification to be	215	# Uncomment the following if you do /not/ wish a verification to be
216	# performed after programming the device.	216	# performed after programming the device.
217	#AVRDUDE_NO_VERIFY = -V	217	#AVRDUDE_NO_VERIFY = -V
218		218
219	# Increase verbosity level. Please use this when submitting bug	219	# Increase verbosity level. Please use this when submitting bug
220	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>	220	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
221	# to submit bug reports.	221	# to submit bug reports.
222	#AVRDUDE_VERBOSE = -v -v	222	#AVRDUDE_VERBOSE = -v -v
223	#-b $(AVRDUDE_BAUD)	223	#-b $(AVRDUDE_BAUD)
224	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)	224	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
225	#AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)	225	#AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
226	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)	226	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
227	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)	227	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
228		228
229		229
230		230
231	# ---------------------------------------------------------------------------	231	# ---------------------------------------------------------------------------
232		232
233	# Define directories, if needed.	233	# Define directories, if needed.
234	DIRAVR = c:/progra~1/winavr	234	DIRAVR = c:/progra~1/winavr
235	DIRAVRBIN = $(DIRAVR)/bin	235	DIRAVRBIN = $(DIRAVR)/bin
236	DIRAVRUTILS = $(DIRAVR)/utils/bin	236	DIRAVRUTILS = $(DIRAVR)/utils/bin
237	DIRINC = .	237	DIRINC = .
238	DIRLIB = $(DIRAVR)/avr/lib	238	DIRLIB = $(DIRAVR)/avr/lib
239		239
240		240
241	# Define programs and commands.	241	# Define programs and commands.
242	SHELL = sh	242	SHELL = sh
243	CC = avr-gcc	243	CC = avr-gcc
244	OBJCOPY = avr-objcopy	244	OBJCOPY = avr-objcopy
245	OBJDUMP = avr-objdump	245	OBJDUMP = avr-objdump
246	SIZE = avr-size	246	SIZE = avr-size
247	NM = avr-nm	247	NM = avr-nm
248	AVRDUDE = avrdude	248	AVRDUDE = avrdude
249	REMOVE = rm -f	249	REMOVE = rm -f
250	COPY = cp	250	COPY = cp
251		251
252		252
253		253
254		254
255	# Define Messages	255	# Define Messages
256	# English	256	# English
257	MSG_ERRORS_NONE = Errors: none	257	MSG_ERRORS_NONE = Errors: none
258	MSG_BEGIN = -------- begin --------	258	MSG_BEGIN = -------- begin --------
259	MSG_END = -------- end --------	259	MSG_END = -------- end --------
260	MSG_SIZE_BEFORE = Size before:	260	MSG_SIZE_BEFORE = Size before:
261	MSG_SIZE_AFTER = Size after:	261	MSG_SIZE_AFTER = Size after:
262	MSG_COFF = Converting to AVR COFF:	262	MSG_COFF = Converting to AVR COFF:
263	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:	263	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
264	MSG_FLASH = Creating load file for Flash:	264	MSG_FLASH = Creating load file for Flash:
265	MSG_EEPROM = Creating load file for EEPROM:	265	MSG_EEPROM = Creating load file for EEPROM:
266	MSG_EXTENDED_LISTING = Creating Extended Listing:	266	MSG_EXTENDED_LISTING = Creating Extended Listing:
267	MSG_SYMBOL_TABLE = Creating Symbol Table:	267	MSG_SYMBOL_TABLE = Creating Symbol Table:
268	MSG_LINKING = Linking:	268	MSG_LINKING = Linking:
269	MSG_COMPILING = Compiling:	269	MSG_COMPILING = Compiling:
270	MSG_ASSEMBLING = Assembling:	270	MSG_ASSEMBLING = Assembling:
271	MSG_CLEANING = Cleaning project:	271	MSG_CLEANING = Cleaning project:
272		272
273		273
274		274
275		275
276	# Define all object files.	276	# Define all object files.
277	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)	277	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
278		278
279	# Define all listing files.	279	# Define all listing files.
280	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)	280	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
281		281
282		282
283	# Compiler flags to generate dependency files.	283	# Compiler flags to generate dependency files.
284	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d	284	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
285	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d	285	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
286		286
287	# Combine all necessary flags and optional flags.	287	# Combine all necessary flags and optional flags.
288	# Add target processor to flags.	288	# Add target processor to flags.
289	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)	289	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
290	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)	290	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
291		291
292		292
293		293
294		294
295		295
296	# Default target.	296	# Default target.
297	all: begin gccversion sizebefore build sizeafter finished end	297	all: begin gccversion sizebefore build sizeafter finished end
298		298
299	build: elf hex eep lss sym	299	build: elf hex eep lss sym
300		300
301	elf: $(TARGET).elf	301	elf: $(TARGET).elf
302	hex: $(TARGET).hex	302	hex: $(TARGET).hex
303	eep: $(TARGET).eep	303	eep: $(TARGET).eep
304	lss: $(TARGET).lss	304	lss: $(TARGET).lss
305	sym: $(TARGET).sym	305	sym: $(TARGET).sym
306		306
307		307
308		308
309	# Eye candy.	309	# Eye candy.
310	# AVR Studio 3.x does not check make's exit code but relies on	310	# AVR Studio 3.x does not check make's exit code but relies on
311	# the following magic strings to be generated by the compile job.	311	# the following magic strings to be generated by the compile job.
312	begin:	312	begin:
313	@echo	313	@echo
314	@echo $(MSG_BEGIN)	314	@echo $(MSG_BEGIN)
315		315
316	finished:	316	finished:
317	@echo $(MSG_ERRORS_NONE)	317	@echo $(MSG_ERRORS_NONE)
318		318
319	end:	319	end:
320	@echo $(MSG_END)	320	@echo $(MSG_END)
321	@echo	321	@echo
322		322
323		323
324	# Display size of file.	324	# Display size of file.
325	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex	325	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
326	ELFSIZE = $(SIZE) -A $(TARGET).elf	326	ELFSIZE = $(SIZE) -A $(TARGET).elf
327	sizebefore:	327	sizebefore:
328	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi	328	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
329		329
330	sizeafter:	330	sizeafter:
331	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi	331	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
332		332
333		333
334		334
335	# Display compiler version information.	335	# Display compiler version information.
336	gccversion :	336	gccversion :
337	@$(CC) --version	337	@$(CC) --version
338		338
339		339
340		340
341	# Program the device.	341	# Program the device.
342	program: $(TARGET).hex $(TARGET).eep	342	program: $(TARGET).hex $(TARGET).eep
343	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)	343	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
344		344
345	#programlock:	345	#programlock:
346	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m	346	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
347		347
348	#programinit:	348	#programinit:
349	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m	349	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
350		350
351	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.	351	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
352	COFFCONVERT=$(OBJCOPY) --debugging \	352	COFFCONVERT=$(OBJCOPY) --debugging \
353	--change-section-address .data-0x800000 \	353	--change-section-address .data-0x800000 \
354	--change-section-address .bss-0x800000 \	354	--change-section-address .bss-0x800000 \
355	--change-section-address .noinit-0x800000 \	355	--change-section-address .noinit-0x800000 \
356	--change-section-address .eeprom-0x810000	356	--change-section-address .eeprom-0x810000
357		357
358		358
359	coff: $(TARGET).elf	359	coff: $(TARGET).elf
360	@echo	360	@echo
361	@echo $(MSG_COFF) $(TARGET).cof	361	@echo $(MSG_COFF) $(TARGET).cof
362	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof	362	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
363		363
364		364
365	extcoff: $(TARGET).elf	365	extcoff: $(TARGET).elf
366	@echo	366	@echo
367	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof	367	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
368	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof	368	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
369		369
370		370
371		371
372	# Create final output files (.hex, .eep) from ELF output file.	372	# Create final output files (.hex, .eep) from ELF output file.
373	%.hex: %.elf	373	%.hex: %.elf
374	@echo	374	@echo
375	@echo $(MSG_FLASH) $@	375	@echo $(MSG_FLASH) $@
376	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@	376	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
377		377
378	%.eep: %.elf	378	%.eep: %.elf
379	@echo	379	@echo
380	@echo $(MSG_EEPROM) $@	380	@echo $(MSG_EEPROM) $@
381	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \	381	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
382	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@	382	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
383		383
384	# Create extended listing file from ELF output file.	384	# Create extended listing file from ELF output file.
385	%.lss: %.elf	385	%.lss: %.elf
386	@echo	386	@echo
387	@echo $(MSG_EXTENDED_LISTING) $@	387	@echo $(MSG_EXTENDED_LISTING) $@
388	$(OBJDUMP) -h -S $< > $@	388	$(OBJDUMP) -h -S $< > $@
389		389
390	# Create a symbol table from ELF output file.	390	# Create a symbol table from ELF output file.
391	%.sym: %.elf	391	%.sym: %.elf
392	@echo	392	@echo
393	@echo $(MSG_SYMBOL_TABLE) $@	393	@echo $(MSG_SYMBOL_TABLE) $@
394	$(NM) -n $< > $@	394	$(NM) -n $< > $@
395		395
396		396
397		397
398	# Link: create ELF output file from object files.	398	# Link: create ELF output file from object files.
399	.SECONDARY : $(TARGET).elf	399	.SECONDARY : $(TARGET).elf
400	.PRECIOUS : $(OBJ)	400	.PRECIOUS : $(OBJ)
401	%.elf: $(OBJ)	401	%.elf: $(OBJ)
402	@echo	402	@echo
403	@echo $(MSG_LINKING) $@	403	@echo $(MSG_LINKING) $@
404	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)	404	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
405		405
406		406
407	# Compile: create object files from C source files.	407	# Compile: create object files from C source files.
408	%.o : %.c	408	%.o : %.c
409	@echo	409	@echo
410	@echo $(MSG_COMPILING) $<	410	@echo $(MSG_COMPILING) $<
411	$(CC) -c $(ALL_CFLAGS) $< -o $@	411	$(CC) -c $(ALL_CFLAGS) $< -o $@
412		412
413		413
414	# Compile: create assembler files from C source files.	414	# Compile: create assembler files from C source files.
415	%.s : %.c	415	%.s : %.c
416	$(CC) -S $(ALL_CFLAGS) $< -o $@	416	$(CC) -S $(ALL_CFLAGS) $< -o $@
417		417
418		418
419	# Assemble: create object files from assembler source files.	419	# Assemble: create object files from assembler source files.
420	%.o : %.S	420	%.o : %.S
421	@echo	421	@echo
422	@echo $(MSG_ASSEMBLING) $<	422	@echo $(MSG_ASSEMBLING) $<
423	$(CC) -c $(ALL_ASFLAGS) $< -o $@	423	$(CC) -c $(ALL_ASFLAGS) $< -o $@
424		424
425		425
426		426
427	# Target: clean project.	427	# Target: clean project.
428	clean: begin clean_list finished end	428	clean: begin clean_list finished end
429		429
430	clean_list :	430	clean_list :
431	@echo	431	@echo
432	@echo $(MSG_CLEANING)	432	@echo $(MSG_CLEANING)
433	$(REMOVE) $(TARGET).hex	433	$(REMOVE) $(TARGET).hex
434	$(REMOVE) $(TARGET).eep	434	$(REMOVE) $(TARGET).eep
435	$(REMOVE) $(TARGET).obj	435	$(REMOVE) $(TARGET).obj
436	$(REMOVE) $(TARGET).cof	436	$(REMOVE) $(TARGET).cof
437	$(REMOVE) $(TARGET).elf	437	$(REMOVE) $(TARGET).elf
438	$(REMOVE) $(TARGET).map	438	$(REMOVE) $(TARGET).map
439	$(REMOVE) $(TARGET).obj	439	$(REMOVE) $(TARGET).obj
440	$(REMOVE) $(TARGET).a90	440	$(REMOVE) $(TARGET).a90
441	$(REMOVE) $(TARGET).sym	441	$(REMOVE) $(TARGET).sym
442	$(REMOVE) $(TARGET).lnk	442	$(REMOVE) $(TARGET).lnk
443	$(REMOVE) $(TARGET).lss	443	$(REMOVE) $(TARGET).lss
444	$(REMOVE) $(OBJ)	444	$(REMOVE) $(OBJ)
445	$(REMOVE) $(LST)	445	$(REMOVE) $(LST)
446	$(REMOVE) $(SRC:.c=.s)	446	$(REMOVE) $(SRC:.c=.s)
447	$(REMOVE) $(SRC:.c=.d)	447	$(REMOVE) $(SRC:.c=.d)
448	$(REMOVE) .dep/*	448	$(REMOVE) .dep/*
449		449
450		450
451		451
452	# Include the dependency files.	452	# Include the dependency files.
453	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)	453	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
454		454
455		455
456	# Listing of phony targets.	456	# Listing of phony targets.
457	.PHONY : all begin finish end sizebefore sizeafter gccversion \	457	.PHONY : all begin finish end sizebefore sizeafter gccversion \
458	build elf hex eep lss sym coff extcoff \	458	build elf hex eep lss sym coff extcoff \
459	clean clean_list program programlock programinit	459	clean clean_list program programlock programinit
460		460

Subversion Repositories HomeAutomation

(root)/trunk/EmbeddedSoftware/AVR/CanDS18S20/makefile @ 261 – Rev 153 → 167