Subversion Repositories HomeAutomation

/**

 * CAN RGB LED. This application is used to control a RGB LED.

 * Still under heavy development

 *

 * @date    2007-02-04

 * @author  Martin Nordén

 *  

 * TODO: A lot, currently trying to get some kind of ready-made programs to work.

 */

/*-----------------------------------------------------------------------------

 * Includes

 *---------------------------------------------------------------------------*/

/* system files */

#include <avr/io.h>

#include <avr/interrupt.h>

#include <avr/wdt.h>

#include <stdio.h>

/* lib files */

#include <can.h>

#include <serial.h>

#include <timebase.h>

#include <math.h> //Not sure this is needed anymore..

#include <avr/pgmspace.h> //To allow read/write from flash

/*----------------------------------------------------------------------------

 * Ehm, struct?

 * -------------------------------------------------------------------------*/

typedef struct

{

    uint8_t R;

    uint8_t G;

    uint8_t B;

    uint8_t Intens;

} Color;

/*-----------------------------------------------------------------------------

 * Programs! This will most likely be improooved, but I have to start somewhere.

 *---------------------------------------------------------------------------*/

//Special combinations that means something special

//The combinations are useless for lighting anyway

//So we might as well use them!

//0x00, 0x00, 0x00, 0x00 means end of program, keep looping it

//0x00, 0x00, 0x00, 0x01 means end of program, halt 

Color pgm1[] PROGMEM = {

{0xff,0x00,0x00,0x00},

{0xff,0xff,0x00,0x00},

{0x00,0xff,0x00,0x00},

{0x00,0xff,0xff,0x00},

{0x00,0x00,0xff,0x00},

{0xff,0x00,0xff,0x00},

{0x00,0x00,0x00,0x00}

};

Color pgm2[] PROGMEM = {

{0x20,0x20,0x30,0x50},

{0x20,0x20,0x30,0x50},

{0x20,0x20,0x30,0x50}

};

Color* programs[] PROGMEM = {

(Color*)pgm1,

(Color*)pgm2

};

/*-----------------------------------------------------------------------------

 * Variables

 *---------------------------------------------------------------------------*/

uint32_t timeStamp; //TimeStamp to keep track of time

uint32_t dimStamp;  //Timestamp to keep track of dimmer changes

Color currColor;  //Current color

Color destColor;  //Destination color

uint16_t fadeSpeed; //Fadingspeed. 16bit for reaaaally slow fading. Sets the speed of colorchange.

uint8_t dimSpeed;       //Dimmer speed. Sets the speed of intensitychange.

uint8_t currProgram;        //This variable keeps track of what program is currently running. 

/*----------------------------------------------------------------------------

 * Functions

 * -------------------------------------------------------------------------*/

void updateLED();

void reformatRGB(uint8_t R, uint8_t G, uint8_t B, uint8_t setBright);

void changeColor(int8_t amount, uint8_t* color);

void fade(uint8_t* current, uint8_t* destination);

/*-----------------------------------------------------------------------------

 * Main Program

 *---------------------------------------------------------------------------*/

int main(void) {

    Timebase_Init();

    Serial_Init();

    Can_Init();

//Setting up OC1A, 16 bit counter used as 8 bit.

    TCCR1A |= (1<<COM1A1) | (1<<WGM11); /* Set OC1A at TOP, mode 14 */

    TCCR1B |= (1<<WGM13) | (1<<WGM12) | (1<<CS12); /* Timer uses main system clock with ? prescale */

    ICR1 = 256; //8 bit precision to match the other two counters.

    OCR1A = 0;  //0% as standard

    DDRB |= (1<<PB1); /* Enable pin as output */

//Setting up OC0A

    TCCR0A |= (1<<COM0A1)|(1<<WGM01)|(1<<WGM00); /* Set OC0A at TOP, Mode 7 */

    TCCR0B |= (1<<CS02); /* Prescaler updating now */

    OCR0A = 0;  //0% standard

    DDRD |= (1<<PD6);

//Setting up OC0B

    TCCR0A |= (1<<COM0B1);

    OCR0B = 0;

    DDRD |= (1<<PD5);

//Initialize variables

    fadeSpeed = 10;

    dimSpeed = 255;

    timeStamp = 0;

    dimStamp = 0;

    Can_Message_t rxMsg;   

    reformatRGB(0x00,0xff,0x00,1);

    destColor.Intens = 100;

    currColor = destColor;

//Just temporary for now, they keep track of some kind of demo-program.

    currProgram = 1;

    uint16_t temp_adress = pgm_read_word(&programs[currProgram-1]); //Get adress for program 0

    sei();

    /* main loop */

    while (1) {

        /* service the CAN routines */

        Can_Service();

        /* Time to fade color? */

        if (Timebase_PassedTimeMillis(timeStamp) >= fadeSpeed) {

            fade(&currColor.R, &destColor.R);          

            fade(&currColor.G, &destColor.G);

            fade(&currColor.B, &destColor.B);

            timeStamp = Timebase_CurrentTime();

            updateLED();

        }

        /* Time to fade intensity? */

        if (Timebase_PassedTimeMillis(dimStamp) >= dimSpeed) {

            fade(&currColor.Intens, &destColor.Intens);

            dimStamp = Timebase_CurrentTime();

            updateLED();

        }

        /* Program management */

        if (currProgram != 0){ //Check if a program is currently running

            if ((currColor.R == destColor.R)&(currColor.G == destColor.G)&(currColor.B == destColor.B)&(currColor.Intens == destColor.Intens)){//Is the current sequence finished?

                //Now we have to check if the program is finished and if we should loop

                if ((pgm_read_byte(temp_adress)==0)&(pgm_read_byte(temp_adress+1)==0)&(pgm_read_byte(temp_adress+2)==0)){

                    //The program has ended! Shall we loop it?

                    if (pgm_read_byte(temp_adress+3)==0){

                        //Yes, let's loop it

                        temp_adress = pgm_read_word(&programs[currProgram-1]);

                    } else {

                        //No, halt!

                        currProgram = 0;

                    }

                } else {

                    //The program has not ended, let's get the next RGB-triplet!

                    reformatRGB(pgm_read_byte(temp_adress),pgm_read_byte(temp_adress + 1),pgm_read_byte(temp_adress + 2),0);

                    temp_adress = temp_adress + 4;                 

                }

            }

        }

        /* check if any messages have been received */

        /* A lot of remote control crap going on here now for testing */

        while (Can_Receive(&rxMsg) == CAN_OK) {

            if ((rxMsg.Data.bytes[0] == 0x0)&(rxMsg.Data.bytes[3] == 0x20)){

                //program = 1;

                //fadeSpeed = 0;

            }

            if ((rxMsg.Data.bytes[0] == 0x0)&(rxMsg.Data.bytes[3] == 0x21)){

                //program = 2;

                //fadeSpeed = 0;

            }

        }

    }

    return 0;

}

/************************************************************************************************

 *     updateLED updates the PWM counter values and thus changes the color of the RGBLED.       *

 *     It doesn't reculculate anything, except the values to write to the PWM registers.        *

 *     TODO: Get rid of the tempcontainer!                                  *

 ************************************************************************************************/

void updateLED(){

    uint8_t tempcontainer;

    tempcontainer = currColor.R * currColor.Intens / 255;   //I really want to skip this, don't know how yet though.

    OCR1A = tempcontainer; 

      OCR0A = currColor.G * currColor.Intens / 255;

    OCR0B = currColor.B * currColor.Intens / 255;      

    //Bara för debugcrap

    Can_Message_t txMsg;

    txMsg.Id = 0x55;

    txMsg.RemoteFlag = 0;

    txMsg.ExtendedFlag = 1;

    txMsg.DataLength = 8;

    txMsg.Data.bytes[0] = currColor.R;

    txMsg.Data.bytes[1] = currColor.G;

    txMsg.Data.bytes[2] = currColor.B;

    txMsg.Data.bytes[3] = currColor.Intens;

    Can_Send(&txMsg);

}

/************************************************************************************************

 *     reformatRGB sets a new target RGB triplet to fade to. It reformats it so that            *

 *     the highest color always gets 0xff. Brightness is recalculated.                          *

 *     if setBright is set to 0, the brightness will not be updated.                    *

 *     TODO: Smarter 16-bit arithmetics would be nice. Also a pointer to struct to be updated.  *

 ************************************************************************************************/

void reformatRGB(uint8_t R, uint8_t G, uint8_t B, uint8_t setBright){

    uint8_t maxvalue;

    uint16_t tempcontainer;

    if ((R>=G)&(R>=B)){

        maxvalue = R;

    } else if ((G>=R)&(G>=B)){

        maxvalue = G;

    } else {

        maxvalue = B;

    }

    tempcontainer = R * 255;

    destColor.R = tempcontainer/maxvalue;

    tempcontainer = G * 255;

    destColor.G = tempcontainer/maxvalue;

    tempcontainer = B * 255;

    destColor.B = tempcontainer/maxvalue;

    if (setBright){

        destColor.Intens = maxvalue;

    }

}

/************************************************************************************************

 *     fade tar in två värden, current och destination och för current ett steg                 *

 *     närmare destination.                                                               *

 ************************************************************************************************/

void fade(uint8_t* current, uint8_t* destination){

    if (*current > *destination){

        *current = *current - 1;

    } else if (*current < *destination){

        *current = *current + 1;

    }

}

/************************************************************************************************

 *     changeColor ändrar en färg mängden amount. -127>127.                                     *

 *     color kan vara dest eller curr R,G,B.                                                    *

 *     Ev. TODO: om t.ex. röd är på max och man vill öka röd ska de andra färgerna minskas. *

 ************************************************************************************************/

void changeColor(int8_t amount, uint8_t* color){

    if ( ((amount > 0)&(*color < 255)) || ((amount < 0)&(*color > 0)) ) //Se till att vi inte slår över *color

    *color = *color + amount;

}