WebSVN – HomeAutomation – Diff – /trunk/EmbeddedSoftware/AVR/CanRGB/main.c

+ *
- * @date    2007-02-04
+ * @date    2007-02-10
  * @author  Martin Nordén
+ *
+ * Set RGB: <byte0 RGBLED_CMD_SETRGB> <byte 1 Set/Fade> <byte2 R> <byte3 G> <byte4 B>
+ * Change RGB: <byte 0 RGBLED_CMD_CHANGERGB> <byte 1 int R> <byte 2 int G> <byte 3 int B>  (Note that they are all signed)
+ * Set Intens: <byte0 RGBLED_CMD_SETINTENS> <byte1 Set/Fade> <byte2 Intens> (<byte3 dimSpeed>)
+ *
- * TODO: A lot, currently trying to get some kind of ready-made programs to work.
+ * TODO: Better CAN Integration, Failsafe mode, Tempsensors etc.
  */
 /*-----------------------------------------------------------------------------
  * Includes
  *---------------------------------------------------------------------------*/
 /* system files */
 #include <avr/io.h>
 #include <avr/interrupt.h>
 #include <avr/wdt.h>
 #include <stdio.h>
+#include <avr/pgmspace.h> //To allow read/write from flash
 /* lib files */
 #include <can.h>
 #include <serial.h>
 #include <timebase.h>
 #include <math.h> //Not sure this is needed anymore..
-#include <avr/pgmspace.h> //To allow read/write from flash
+/*----------------------------------------------------------------------------
+ * Defines
+ * -------------------------------------------------------------------------*/
+//Not implemented yet. Will be implementet when I build a canUSB :)
+#define RGBLED_CMD_GET      0x1400
+#define RGBLED_CMD_SEND     0x1401
+#define RGBLED_CMD_STATUS       0x00    /* Get status */
+#define RGBLED_CMD_SETRGB       0x01    /* Set RGB Triplet */
+#define RGBLED_CMD_CHANGERGB  0x02  /* Change RGB +/- */
+#define RGBLED_CMD_SETINTENS  0x10  /* Set intensity */
 /*----------------------------------------------------------------------------
  * Ehm, struct?
  * -------------------------------------------------------------------------*/
 typedef struct
     uint8_t B;
     uint8_t Intens;
 } Color;
 /*-----------------------------------------------------------------------------
- * Programs! This will most likely be improooved, but I have to start somewhere.
+ * Programs! There will be a better way to add programs here.. some day.
  *---------------------------------------------------------------------------*/
 //Special combinations that means something special
 //The combinations are useless for lighting anyway
 //So we might as well use them!
 //0x00, 0x00, 0x00, 0x00 means end of program, keep looping it
 //0x00, 0x00, 0x00, 0x01 means end of program, halt
 Color pgm1[] PROGMEM = {
+{0xff,0x00,0x00,0x64},
+{0xff,0xff,0x00,0x10},
+{0x00,0xff,0x00,0xa0},
+{0x00,0xff,0xff,0x7f},
+{0x00,0x00,0xff,0x7f},
+{0xff,0x00,0xff,0x40},
+{0x00,0x00,0x00,0x00}
+};
+Color pgm2[] PROGMEM = {
 {0xff,0x00,0x00,0x00},
 {0xff,0xff,0x00,0x00},
-{0x00,0xff,0x00,0x00},
+{0xff,0xff,0xff,0x00},
-{0x00,0xff,0xff,0x00},
+{0xa0,0x00,0xa0,0x00},
 {0x00,0x00,0xff,0x00},
-{0xff,0x00,0xff,0x00},
 {0x00,0x00,0x00,0x00}
 };
-Color pgm2[] PROGMEM = {
+Color pgm3[] PROGMEM = {
-{0x20,0x20,0x30,0x50},
-{0x20,0x20,0x30,0x50},
+{0xff,0xff,0xff,0x00},
-{0x20,0x20,0x30,0x50}
+{0x00,0x00,0x00,0x01}
 };
 Color* programs[] PROGMEM = {
 (Color*)pgm1,
-(Color*)pgm2
+(Color*)pgm2,
+(Color*)pgm3
 };
 /*-----------------------------------------------------------------------------
  * Variables
  *---------------------------------------------------------------------------*/
 uint32_t timeStamp; //TimeStamp to keep track of time
 uint32_t dimStamp;  //Timestamp to keep track of dimmer changes
 uint16_t fadeSpeed; //Fadingspeed. 16bit for reaaaally slow fading. Sets the speed of colorchange.
 uint8_t dimSpeed;       //Dimmer speed. Sets the speed of intensitychange.
-uint8_t currProgram;        //This variable keeps track of what program is currently running.
+uint8_t currProgram;    //This variable keeps track of what program is currently running.
+uint8_t programMode;    //This keeps track of what mode we are currently using. 0: the program obeyes the current brightness, 1: the program is allowed to set it's own brightness
 /*----------------------------------------------------------------------------
  * Functions
  * -------------------------------------------------------------------------*/
 void updateLED();
 /*-----------------------------------------------------------------------------
  * Main Program
  *---------------------------------------------------------------------------*/
 int main(void) {
     Timebase_Init();
     Serial_Init();
     Can_Init();
 //Setting up OC1A, 16 bit counter used as 8 bit.
     TCCR1A |= (1<<COM1A1) | (1<<WGM11); /* Set OC1A at TOP, mode 14 */
     TCCR1B |= (1<<WGM13) | (1<<WGM12) | (1<<CS12); /* Timer uses main system clock with ? prescale */
     ICR1 = 256; //8 bit precision to match the other two counters.
     OCR1A = 0;  //0% as standard
     DDRB |= (1<<PB1); /* Enable pin as output */
 //Setting up OC0A
     TCCR0A |= (1<<COM0A1)|(1<<WGM01)|(1<<WGM00); /* Set OC0A at TOP, Mode 7 */
     TCCR0B |= (1<<CS02); /* Prescaler updating now */
     OCR0A = 0;  //0% standard
     DDRD |= (1<<PD6);
 //Setting up OC0B
     TCCR0A |= (1<<COM0B1);
     OCR0B = 0;
     DDRD |= (1<<PD5);
 //Initialize variables
     fadeSpeed = 10;
-    dimSpeed = 255;
+    dimSpeed = 10;
     timeStamp = 0;
     dimStamp = 0;
     Can_Message_t rxMsg;
     reformatRGB(0x00,0xff,0x00,1);
-    destColor.Intens = 100;
+    destColor.Intens = 250;
     currColor = destColor;
 //Just temporary for now, they keep track of some kind of demo-program.
     currProgram = 1;
+    programMode = 0;
     uint16_t temp_adress = pgm_read_word(&programs[currProgram-1]); //Get adress for program 0
     sei();
     /* main loop */
     while (1) {
                 //Now we have to check if the program is finished and if we should loop
                 if ((pgm_read_byte(temp_adress)==0)&(pgm_read_byte(temp_adress+1)==0)&(pgm_read_byte(temp_adress+2)==0)){
                     //The program has ended! Shall we loop it?
                     if (pgm_read_byte(temp_adress+3)==0){
                         //Yes, let's loop it
                         temp_adress = pgm_read_word(&programs[currProgram-1]);
                     } else {
                         //No, halt!
                         currProgram = 0;
+                    }
                 } else {
                     //The program has not ended, let's get the next RGB-triplet!
+                    destColor.R = pgm_read_byte(temp_adress);
-                    reformatRGB(pgm_read_byte(temp_adress),pgm_read_byte(temp_adress + 1),pgm_read_byte(temp_adress + 2),0);
+                    destColor.G = pgm_read_byte(temp_adress + 1);
-                    temp_adress = temp_adress + 4;
+                    destColor.B = pgm_read_byte(temp_adress + 2);
+                    if (programMode == 1){
+                        destColor.Intens = pgm_read_byte(temp_adress + 3);
+                    }
+                    temp_adress = temp_adress + 4;
+                }
             }
         }
         /* check if any messages have been received */
         /* A lot of remote control crap going on here now for testing */
         while (Can_Receive(&rxMsg) == CAN_OK) {
-            if ((rxMsg.Data.bytes[0] == 0x0)&(rxMsg.Data.bytes[3] == 0x20)){
+            if ((rxMsg.Data.bytes[0] == 0xf)&(rxMsg.Data.bytes[3] == 0x01)){
-                //program = 1;
+                currProgram = 1;
+                temp_adress = pgm_read_word(&programs[currProgram-1]);
+            }
+            if ((rxMsg.Data.bytes[0] == 0xf)&(rxMsg.Data.bytes[3] == 0x02)){
-                //fadeSpeed = 0;
+                currProgram = 2;
+                temp_adress = pgm_read_word(&programs[currProgram-1]);
             }
-            if ((rxMsg.Data.bytes[0] == 0x0)&(rxMsg.Data.bytes[3] == 0x21)){
+            if ((rxMsg.Data.bytes[0] == 0xf)&(rxMsg.Data.bytes[3] == 0x03)){
-                //program = 2;
+                currProgram = 3;
+                temp_adress = pgm_read_word(&programs[currProgram-1]);
+            }
+            if ((rxMsg.Data.bytes[0] == 0xf)&(rxMsg.Data.bytes[3] == 0x00)){
-                //fadeSpeed = 0;
+                currProgram = 0;
             }
+        }
+    }
     return 0;
+}
 /************************************************************************************************
  *     updateLED updates the PWM counter values and thus changes the color of the RGBLED.       *
  *     It doesn't reculculate anything, except the values to write to the PWM registers.        *
  *     TODO: Get rid of the tempcontainer!                                  *
  ************************************************************************************************/
     tempcontainer = currColor.R * currColor.Intens / 255;   //I really want to skip this, don't know how yet though.
     OCR1A = tempcontainer;
       OCR0A = currColor.G * currColor.Intens / 255;
     OCR0B = currColor.B * currColor.Intens / 255;
+/*
     //Bara för debugcrap
     Can_Message_t txMsg;
     txMsg.Id = 0x55;
     txMsg.RemoteFlag = 0;
     txMsg.ExtendedFlag = 1;
     txMsg.Data.bytes[1] = currColor.G;
     txMsg.Data.bytes[2] = currColor.B;
     txMsg.Data.bytes[3] = currColor.Intens;
     Can_Send(&txMsg);
+*/
+}
 /************************************************************************************************
+    }
+}
 /************************************************************************************************
- *     fade tar in två värden, current och destination och för current ett steg                 *
+ *     fade takes two pointers, current and destination and fades current               *
- *     närmare destination.                                                               *
+ *     one tick closer to destination.                                                        *
  ************************************************************************************************/
 void fade(uint8_t* current, uint8_t* destination){
     if (*current > *destination){
         *current = *current - 1;
     } else if (*current < *destination){
+    }
+}
 /************************************************************************************************
- *     changeColor ändrar en färg mängden amount. -127>127.                                     *
+ *     changeColor changes a color accord to amount. -127>127.                                  *
- *     color kan vara dest eller curr R,G,B.                                                    *
+ *     color is either dest och curr R,G,B.                                                     *
- *     Ev. TODO: om t.ex. röd är på max och man vill öka röd ska de andra färgerna minskas. *
+ *     Maybe TODO: If red is already 255 and we want to increase it, decrease the other ones.   *
  ************************************************************************************************/
 void changeColor(int8_t amount, uint8_t* color){
     if ( ((amount > 0)&(*color < 255)) || ((amount < 0)&(*color > 0)) ) //Se till att vi inte slår över *color
     *color = *color + amount;
+}

Subversion Repositories HomeAutomation

(root)/trunk/EmbeddedSoftware/AVR/CanRGB/main.c @ 310 – Rev 305 → 306