WebSVN – HomeAutomation – Diff – /trunk/EmbeddedSoftware/AVR/CanSensors/makefile


# Hey Emacs, this is a -*- makefile -*-
#
# WinAVR makefile written by Eric B. Weddington, Jörg Wunsch, et al.
# Released to the Public Domain
# Please read the make user manual!
#
# Additional material for this makefile was submitted by:
#  Tim Henigan
#  Peter Fleury
#  Reiner Patommel
#  Sander Pool
#  Frederik Rouleau
#  Markus Pfaff
#
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
#
# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
#                4.07 or greater).
#
# make program = Download the hex file to the device, using avrdude.  Please
#                customize the avrdude settings below first!
#
# make filename.s = Just compile filename.c into the assembler code only
#
# To rebuild project do "make clean" then "make all".
#
 
########
# Differences from WinAVR 20040720 sample:
# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
# - F_OSC Define in CFLAGS and AFLAGS
 
 
# MCU name
#MCU = atmega32
MCU = atmega88
#MCU = atmega16
 
 
# Main Oscillator Frequency
##F_OSC = 1000000
##F_OSC = 1843200
##F_OSC = 2000000
##F_OSC = 3686400
##F_OSC = 4000000
F_OSC = 8000000
#F_OSC = 11059200
##F_OSC = 16000000
 
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
 
 
# Target file name (without extension).
TARGET = main
 
LIBDIR = ../lib/src/
 
 
# List C source files here. (C dependencies are automatically generated.)
SRC =	$(TARGET).c\
		$(LIBDIR)mcu/mcu.c\
		$(LIBDIR)mcu/serial.c\
		$(LIBDIR)mcu/uart.c\
		$(LIBDIR)mcu/timebase.c\
		$(LIBDIR)can/can.c\
		$(LIBDIR)can/mcp2515/mcp2515.c\
 
 
		$(LIBDIR)sensor/ds18s20/ds18x20.c\
		$(LIBDIR)sensor/ds18s20/crc8.c\
		$(LIBDIR)sensor/ds18s20/delay.c\
		$(LIBDIR)sensor/ds18s20/onewire.c\
		$(LIBDIR)sensor/tc1047/tc1047.c\
 
 
# List Assembler source files here.
# Make them always end in a capital .S.  Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = 
 
 
# Optimization level, can be [0, 1, 2, 3, s]. 
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
#OPT = 3
 
# Debugging format.
# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
#DEBUG = stabs
DEBUG = dwarf-2
 
# List any extra directories to look for include files here.
#     Each directory must be seperated by a space.
EXTRAINCDIRS = 	$(LIBDIR)/can\
				$(LIBDIR)/can/mcp2515\
				$(LIBDIR)/mcu\
				$(LIBDIR)/../funcdefs\
				$(LIBDIR)/sensor/ds18s20 \
				$(LIBDIR)/sensor/tc1047 \
 
# Compiler flag to set the C Standard level.
# c89   - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99   - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
 
# Place -D or -U options here
CDEFS =
 
# Place -I options here
CINCS =
 
 
# Compiler flags.
#  -g*:          generate debugging information
#  -O*:          optimization level
#  -f...:        tuning, see GCC manual and avr-libc documentation
#  -Wall...:     warning level
#  -Wa,...:      tell GCC to pass this to the assembler.
#    -adhlns...: create assembler listing
CFLAGS = 
#CFLAGS += -g$(DEBUG)
CFLAGS += $(CDEFS) $(CINCS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wstrict-prototypes
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
CFLAGS += -DF_OSC=$(F_OSC)
 
 
 
# Assembler flags.
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing
#  -gstabs:   have the assembler create line number information; note that
#             for use in COFF files, additional information about filenames
#             and function names needs to be present in the assembler source
#             files -- see avr-libc docs [FIXME: not yet described there]
##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
ASFLAGS += -DF_OSC=$(F_OSC)
 
 
#Additional libraries.
 
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
PRINTF_LIB = $(PRINTF_LIB_MIN)
 
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
SCANF_LIB = 
 
MATH_LIB = -lm
 
# External memory options
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
 
EXTMEMOPTS =
 
# Linker flags.
#  -Wl,...:     tell GCC to pass this to linker.
#    -Map:      create map file
#    --cref:    add cross reference to  map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 
 
 
 
# Programming support using avrdude. Settings and variables.
 
# Programming hardware: alf avr910 avrisp bascom bsd 
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = avrispv2
 
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = /dev/ttyUSB0    # programmer connected to serial device
AVRDUDE_BAUD = 115200
 
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 
 
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
 
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
 
# Increase verbosity level.  Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
 
 
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 
 
 
# ---------------------------------------------------------------------------
 
# Define directories, if needed.
DIRAVR = c:/progra~1/winavr
DIRAVRBIN = $(DIRAVR)/bin
DIRAVRUTILS = $(DIRAVR)/utils/bin
DIRINC = .
DIRLIB = $(DIRAVR)/avr/lib
 
 
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
COPY = cp
 
 
 
 
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = --------  end  --------
MSG_SIZE_BEFORE = Size before: 
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
 
 
 
 
# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
 
# Define all listing files.
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
 
 
# Compiler flags to generate dependency files.
### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
 
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 
 
 
# Default target.
all: begin gccversion sizebefore build sizeafter finished end
 
build: elf hex eep lss sym
 
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss 
sym: $(TARGET).sym
 
 
 
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
	@echo
	@echo $(MSG_BEGIN)
 
finished:
	@echo $(MSG_ERRORS_NONE)
 
end:
	@echo $(MSG_END)
	@echo
 
 
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf
sizebefore:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
 
sizeafter:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
 
 
 
# Display compiler version information.
gccversion : 
	@$(CC) --version
 
 
 
# Program the device.  
program: $(TARGET).hex $(TARGET).eep
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
#programlock: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
 
#programinit: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
 
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .data-0x800000 \
--change-section-address .bss-0x800000 \
--change-section-address .noinit-0x800000 \
--change-section-address .eeprom-0x810000 
 
 
coff: $(TARGET).elf
	@echo
	@echo $(MSG_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 
 
extcoff: $(TARGET).elf
	@echo
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 
 
 
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
	@echo
	@echo $(MSG_FLASH) $@
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 
%.eep: %.elf
	@echo
	@echo $(MSG_EEPROM) $@
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
# Create extended listing file from ELF output file.
%.lss: %.elf
	@echo
	@echo $(MSG_EXTENDED_LISTING) $@
	$(OBJDUMP) -h -S $< > $@
 
# Create a symbol table from ELF output file.
%.sym: %.elf
	@echo
	@echo $(MSG_SYMBOL_TABLE) $@
	$(NM) -n $< > $@
 
 
 
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
	@echo
	@echo $(MSG_LINKING) $@
	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
 
 
# Compile: create object files from C source files.
%.o : %.c
	@echo
	@echo $(MSG_COMPILING) $<
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
 
 
# Compile: create assembler files from C source files.
%.s : %.c
	$(CC) -S $(ALL_CFLAGS) $< -o $@
 
 
# Assemble: create object files from assembler source files.
%.o : %.S
	@echo
	@echo $(MSG_ASSEMBLING) $<
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
 
 
 
# Target: clean project.
clean: begin clean_list finished end
 
clean_list :
	@echo
	@echo $(MSG_CLEANING)
	$(REMOVE) $(TARGET).hex
	$(REMOVE) $(TARGET).eep
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).cof
	$(REMOVE) $(TARGET).elf
	$(REMOVE) $(TARGET).map
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).a90
	$(REMOVE) $(TARGET).sym
	$(REMOVE) $(TARGET).lnk
	$(REMOVE) $(TARGET).lss
	$(REMOVE) $(OBJ)
	$(REMOVE) $(LST)
	$(REMOVE) $(SRC:.c=.s)
	$(REMOVE) $(SRC:.c=.d)
	$(REMOVE) .dep/*
 
 
 
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 
 
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list program programlock programinit
 

Rev 239	Rev 255
1	# Hey Emacs, this is a -- makefile --	1	# Hey Emacs, this is a -- makefile --
2	#	2	#
3	# WinAVR makefile written by Eric B. Weddington, ~~J�rg~~ Wunsch, et al.	3	# WinAVR makefile written by Eric B. Weddington, Jörg Wunsch, et al.
4	# Released to the Public Domain	4	# Released to the Public Domain
5	# Please read the make user manual!	5	# Please read the make user manual!
6	#	6	#
7	# Additional material for this makefile was submitted by:	7	# Additional material for this makefile was submitted by:
8	# Tim Henigan	8	# Tim Henigan
9	# Peter Fleury	9	# Peter Fleury
10	# Reiner Patommel	10	# Reiner Patommel
11	# Sander Pool	11	# Sander Pool
12	# Frederik Rouleau	12	# Frederik Rouleau
13	# Markus Pfaff	13	# Markus Pfaff
14	#	14	#
15	# On command line:	15	# On command line:
16	#	16	#
17	# make all = Make software.	17	# make all = Make software.
18	#	18	#
19	# make clean = Clean out built project files.	19	# make clean = Clean out built project files.
20	#	20	#
21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).	21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
22	#	22	#
23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio	23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
24	# 4.07 or greater).	24	# 4.07 or greater).
25	#	25	#
26	# make program = Download the hex file to the device, using avrdude. Please	26	# make program = Download the hex file to the device, using avrdude. Please
27	# customize the avrdude settings below first!	27	# customize the avrdude settings below first!
28	#	28	#
29	# make filename.s = Just compile filename.c into the assembler code only	29	# make filename.s = Just compile filename.c into the assembler code only
30	#	30	#
31	# To rebuild project do "make clean" then "make all".	31	# To rebuild project do "make clean" then "make all".
32	#	32	#
33		33
34	########	34	########
35	# Differences from WinAVR 20040720 sample:	35	# Differences from WinAVR 20040720 sample:
36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)	36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
37	# - F_OSC Define in CFLAGS and AFLAGS	37	# - F_OSC Define in CFLAGS and AFLAGS
38		38
39		39
40	# MCU name	40	# MCU name
41	#MCU = atmega32	41	#MCU = atmega32
42	MCU = atmega88	42	MCU = atmega88
43	#MCU = atmega16	43	#MCU = atmega16
44		44
45		45
46	# Main Oscillator Frequency	46	# Main Oscillator Frequency
47	##F_OSC = 1000000	47	##F_OSC = 1000000
48	##F_OSC = 1843200	48	##F_OSC = 1843200
49	##F_OSC = 2000000	49	##F_OSC = 2000000
50	##F_OSC = 3686400	50	##F_OSC = 3686400
51	##F_OSC = 4000000	51	##F_OSC = 4000000
52	F_OSC = 8000000	52	F_OSC = 8000000
53	~~##F_OSC~~ = 11059200	53	#F_OSC = 11059200
54	##F_OSC = 16000000	54	##F_OSC = 16000000
55		55
56	# Output format. (can be srec, ihex, binary)	56	# Output format. (can be srec, ihex, binary)
57	FORMAT = ihex	57	FORMAT = ihex
58		58
59		59
60	# Target file name (without extension).	60	# Target file name (without extension).
61	TARGET = main	61	TARGET = main
62		62
63	LIBDIR = ../lib/src/	63	LIBDIR = ../lib/src/
64		-
65		64
66	# List C source files here. (C dependencies are automatically generated.)	65	# List C source files here. (C dependencies are automatically generated.)
67	SRC = $(TARGET).c\	66	SRC = $(TARGET).c\
68	$(LIBDIR)mcu/mcu.c\	67	$(LIBDIR)mcu/mcu.c\
69	$(LIBDIR)mcu/serial.c\	68	$(LIBDIR)mcu/serial.c\
70	$(LIBDIR)mcu/uart.c\	69	$(LIBDIR)mcu/uart.c\
71	$(LIBDIR)mcu/timebase.c\	70	$(LIBDIR)mcu/timebase.c\
72	$(LIBDIR)can/can.c\	71	$(LIBDIR)can/can.c\
73	$(LIBDIR)can/mcp2515/mcp2515.c\	72	$(LIBDIR)can/mcp2515/mcp2515.c\
74	$(LIBDIR)sensor/ds18s20/onewire.c\	-
75	$(LIBDIR)sensor/ds18s20/delay.c\	-
76	$(LIBDIR)sensor/ds18s20/ds18x20.c\	73	$(LIBDIR)sensor/ds18s20/ds18x20.c\
77	$(LIBDIR)sensor/ds18s20/crc8.c\	74	$(LIBDIR)sensor/ds18s20/crc8.c\
-		75	$(LIBDIR)sensor/ds18s20/delay.c\
-		76	$(LIBDIR)sensor/ds18s20/onewire.c\
78	$(LIBDIR)sensor/tc1047/tc1047.c\	77	$(LIBDIR)sensor/tc1047/tc1047.c\
79	$(LIBDIR)sensor/sht7x/sht7x.c	-
80		78
81	# List Assembler source files here.	79	# List Assembler source files here.
82	# Make them always end in a capital .S. Files ending in a lowercase .s	80	# Make them always end in a capital .S. Files ending in a lowercase .s
83	# will not be considered source files but generated files (assembler	81	# will not be considered source files but generated files (assembler
84	# output from the compiler), and will be deleted upon "make clean"!	82	# output from the compiler), and will be deleted upon "make clean"!
85	# Even though the DOS/Win* filesystem matches both .s and .S the same,	83	# Even though the DOS/Win* filesystem matches both .s and .S the same,
86	# it will preserve the spelling of the filenames, and gcc itself does	84	# it will preserve the spelling of the filenames, and gcc itself does
87	# care about how the name is spelled on its command-line.	85	# care about how the name is spelled on its command-line.
88	ASRC =	86	ASRC =
89		87
90		88
91	# Optimization level, can be [0, 1, 2, 3, s].	89	# Optimization level, can be [0, 1, 2, 3, s].
92	# 0 = turn off optimization. s = optimize for size.	90	# 0 = turn off optimization. s = optimize for size.
93	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)	91	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
94	OPT = s	92	OPT = s
95	#OPT = 3	93	#OPT = 3
96		94
97	# Debugging format.	95	# Debugging format.
98	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.	96	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
99	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.	97	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
100	#DEBUG = stabs	98	#DEBUG = stabs
101	DEBUG =	99	DEBUG = dwarf-2
102		100
103	# List any extra directories to look for include files here.	101	# List any extra directories to look for include files here.
104	# Each directory must be seperated by a space.	102	# Each directory must be seperated by a space.
105	EXTRAINCDIRS = $(LIBDIR)/~~can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu $(LIBDIR)/sensor/ds18s20 $(LIBDIR)/sensor/tc1047 $(LIBDIR)/sensor/sht7x $(LIBDIR)/../funcdefs~~	103	EXTRAINCDIRS = $(LIBDIR)/can\
-		104	$(LIBDIR)/can/mcp2515\
-		105	$(LIBDIR)/mcu\
-		106	$(LIBDIR)/../funcdefs\
-		107	$(LIBDIR)/sensor/ds18s20 \
-		108	$(LIBDIR)/sensor/tc1047 \
106		109
107	# Compiler flag to set the C Standard level.	110	# Compiler flag to set the C Standard level.
108	# c89 - "ANSI" C	111	# c89 - "ANSI" C
109	# gnu89 - c89 plus GCC extensions	112	# gnu89 - c89 plus GCC extensions
110	# c99 - ISO C99 standard (not yet fully implemented)	113	# c99 - ISO C99 standard (not yet fully implemented)
111	# gnu99 - c99 plus GCC extensions	114	# gnu99 - c99 plus GCC extensions
112	CSTANDARD = -std=gnu99	115	CSTANDARD = -std=gnu99
113		116
114	# Place -D or -U options here	117	# Place -D or -U options here
115	CDEFS =	118	CDEFS =
116		119
117	# Place -I options here	120	# Place -I options here
118	CINCS =	121	CINCS =
119		122
120		123
121	# Compiler flags.	124	# Compiler flags.
122	# -g*: generate debugging information	125	# -g*: generate debugging information
123	# -O*: optimization level	126	# -O*: optimization level
124	# -f...: tuning, see GCC manual and avr-libc documentation	127	# -f...: tuning, see GCC manual and avr-libc documentation
125	# -Wall...: warning level	128	# -Wall...: warning level
126	# -Wa,...: tell GCC to pass this to the assembler.	129	# -Wa,...: tell GCC to pass this to the assembler.
127	# -adhlns...: create assembler listing	130	# -adhlns...: create assembler listing
-		131	CFLAGS =
128	~~CFLAGS~~ = -g$(DEBUG)	132	#CFLAGS += -g$(DEBUG)
129	CFLAGS += $(CDEFS) $(CINCS)	133	CFLAGS += $(CDEFS) $(CINCS)
130	CFLAGS += -O$(OPT)	134	CFLAGS += -O$(OPT)
131	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums	135	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
132	CFLAGS += -Wall -Wstrict-prototypes	136	CFLAGS += -Wall -Wstrict-prototypes
133	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)	137	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
134	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))	138	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
135	CFLAGS += $(CSTANDARD)	139	CFLAGS += $(CSTANDARD)
136	CFLAGS += -DF_OSC=$(F_OSC)	140	CFLAGS += -DF_OSC=$(F_OSC)
137		-
138		141
139		142
140	# Assembler flags.	143	# Assembler flags.
141	# -Wa,...: tell GCC to pass this to the assembler.	144	# -Wa,...: tell GCC to pass this to the assembler.
142	# -ahlms: create listing	145	# -ahlms: create listing
143	# -gstabs: have the assembler create line number information; note that	146	# -gstabs: have the assembler create line number information; note that
144	# for use in COFF files, additional information about filenames	147	# for use in COFF files, additional information about filenames
145	# and function names needs to be present in the assembler source	148	# and function names needs to be present in the assembler source
146	# files -- see avr-libc docs [FIXME: not yet described there]	149	# files -- see avr-libc docs [FIXME: not yet described there]
147	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs	150	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
148	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)	151	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
149	ASFLAGS += -DF_OSC=$(F_OSC)	152	ASFLAGS += -DF_OSC=$(F_OSC)
150		153
151		154
152	#Additional libraries.	155	#Additional libraries.
153		156
154	# Minimalistic printf version	157	# Minimalistic printf version
155	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min	158	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
156		159
157	# Floating point printf version (requires MATH_LIB = -lm below)	160	# Floating point printf version (requires MATH_LIB = -lm below)
158	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt	161	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
159		162
160	PRINTF_LIB =	163	PRINTF_LIB = $(PRINTF_LIB_MIN)
161		164
162	# Minimalistic scanf version	165	# Minimalistic scanf version
163	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min	166	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
164		167
165	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)	168	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
166	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt	169	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
167		170
168	SCANF_LIB =	171	SCANF_LIB =
169		172
170	MATH_LIB = -lm	173	MATH_LIB = -lm
171		174
172	# External memory options	175	# External memory options
173		176
174	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	177	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
175	# used for variables (.data/.bss) and heap (malloc()).	178	# used for variables (.data/.bss) and heap (malloc()).
176	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff	179	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
177		180
178	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	181	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
179	# only used for heap (malloc()).	182	# only used for heap (malloc()).
180	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff	183	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
181		184
182	EXTMEMOPTS =	185	EXTMEMOPTS =
183		186
184	# Linker flags.	187	# Linker flags.
185	# -Wl,...: tell GCC to pass this to linker.	188	# -Wl,...: tell GCC to pass this to linker.
186	# -Map: create map file	189	# -Map: create map file
187	# --cref: add cross reference to map file	190	# --cref: add cross reference to map file
188	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref	191	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
189	LDFLAGS += $(EXTMEMOPTS)	192	LDFLAGS += $(EXTMEMOPTS)
190	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)	193	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
191		194
192		195
193		196
194		197
195	# Programming support using avrdude. Settings and variables.	198	# Programming support using avrdude. Settings and variables.
196		199
197	# Programming hardware: alf avr910 avrisp bascom bsd	200	# Programming hardware: alf avr910 avrisp bascom bsd
198	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500	201	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
199	#	202	#
200	# Type: avrdude -c ?	203	# Type: avrdude -c ?
201	# to get a full listing.	204	# to get a full listing.
202	#	205	#
203	AVRDUDE_PROGRAMMER = avrispv2	206	AVRDUDE_PROGRAMMER = avrispv2
204		207
205	# com1 = serial port. Use lpt1 to connect to parallel port.	208	# com1 = serial port. Use lpt1 to connect to parallel port.
206	AVRDUDE_PORT = /dev/ttyUSB0 # programmer connected to serial device	209	AVRDUDE_PORT = /dev/ttyUSB0 # programmer connected to serial device
-		210	AVRDUDE_BAUD = 115200
207		211
208	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex	212	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
209	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep	213	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
210		214
211		215
212	# Uncomment the following if you want avrdude's erase cycle counter.	216	# Uncomment the following if you want avrdude's erase cycle counter.
213	# Note that this counter needs to be initialized first using -Yn,	217	# Note that this counter needs to be initialized first using -Yn,
214	# see avrdude manual.	218	# see avrdude manual.
215	#AVRDUDE_ERASE_COUNTER = -y	219	#AVRDUDE_ERASE_COUNTER = -y
216		220
217	# Uncomment the following if you do /not/ wish a verification to be	221	# Uncomment the following if you do /not/ wish a verification to be
218	# performed after programming the device.	222	# performed after programming the device.
219	#AVRDUDE_NO_VERIFY = -V	223	#AVRDUDE_NO_VERIFY = -V
220		224
221	# Increase verbosity level. Please use this when submitting bug	225	# Increase verbosity level. Please use this when submitting bug
222	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>	226	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
223	# to submit bug reports.	227	# to submit bug reports.
224	#AVRDUDE_VERBOSE = -v -v	228	#AVRDUDE_VERBOSE = -v -v
225	#-b $(AVRDUDE_BAUD)	-
-		229
226	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)	230	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
227	~~#AVRDUDE_FLAGS~~ += $(AVRDUDE_NO_VERIFY)	231	AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
228	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)	232	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
229	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)	233	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
230		234
231		235
232		236
233	# ---------------------------------------------------------------------------	237	# ---------------------------------------------------------------------------
234		238
235	# Define directories, if needed.	239	# Define directories, if needed.
236	DIRAVR = c:/progra~1/winavr	240	DIRAVR = c:/progra~1/winavr
237	DIRAVRBIN = $(DIRAVR)/bin	241	DIRAVRBIN = $(DIRAVR)/bin
238	DIRAVRUTILS = $(DIRAVR)/utils/bin	242	DIRAVRUTILS = $(DIRAVR)/utils/bin
239	DIRINC = .	243	DIRINC = .
240	DIRLIB = $(DIRAVR)/avr/lib	244	DIRLIB = $(DIRAVR)/avr/lib
241		245
242		246
243	# Define programs and commands.	247	# Define programs and commands.
244	SHELL = sh	248	SHELL = sh
245	CC = avr-gcc	249	CC = avr-gcc
246	OBJCOPY = avr-objcopy	250	OBJCOPY = avr-objcopy
247	OBJDUMP = avr-objdump	251	OBJDUMP = avr-objdump
248	SIZE = avr-size	252	SIZE = avr-size
249	NM = avr-nm	253	NM = avr-nm
250	AVRDUDE = avrdude	254	AVRDUDE = avrdude
251	REMOVE = rm -f	255	REMOVE = rm -f
252	COPY = cp	256	COPY = cp
253		257
254		258
255		259
256		260
257	# Define Messages	261	# Define Messages
258	# English	262	# English
259	MSG_ERRORS_NONE = Errors: none	263	MSG_ERRORS_NONE = Errors: none
260	MSG_BEGIN = -------- begin --------	264	MSG_BEGIN = -------- begin --------
261	MSG_END = -------- end --------	265	MSG_END = -------- end --------
262	MSG_SIZE_BEFORE = Size before:	266	MSG_SIZE_BEFORE = Size before:
263	MSG_SIZE_AFTER = Size after:	267	MSG_SIZE_AFTER = Size after:
264	MSG_COFF = Converting to AVR COFF:	268	MSG_COFF = Converting to AVR COFF:
265	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:	269	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
266	MSG_FLASH = Creating load file for Flash:	270	MSG_FLASH = Creating load file for Flash:
267	MSG_EEPROM = Creating load file for EEPROM:	271	MSG_EEPROM = Creating load file for EEPROM:
268	MSG_EXTENDED_LISTING = Creating Extended Listing:	272	MSG_EXTENDED_LISTING = Creating Extended Listing:
269	MSG_SYMBOL_TABLE = Creating Symbol Table:	273	MSG_SYMBOL_TABLE = Creating Symbol Table:
270	MSG_LINKING = Linking:	274	MSG_LINKING = Linking:
271	MSG_COMPILING = Compiling:	275	MSG_COMPILING = Compiling:
272	MSG_ASSEMBLING = Assembling:	276	MSG_ASSEMBLING = Assembling:
273	MSG_CLEANING = Cleaning project:	277	MSG_CLEANING = Cleaning project:
274		278
275		279
276		280
277		281
278	# Define all object files.	282	# Define all object files.
279	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)	283	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
280		284
281	# Define all listing files.	285	# Define all listing files.
282	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)	286	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
283		287
284		288
285	# Compiler flags to generate dependency files.	289	# Compiler flags to generate dependency files.
286	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d	290	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
287	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d	291	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
288		292
289	# Combine all necessary flags and optional flags.	293	# Combine all necessary flags and optional flags.
290	# Add target processor to flags.	294	# Add target processor to flags.
291	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)	295	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
292	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)	296	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
293		297
294		298
295		299
296		300
297		301
298	# Default target.	302	# Default target.
299	all: begin gccversion sizebefore build sizeafter finished end	303	all: begin gccversion sizebefore build sizeafter finished end
300		304
301	build: elf hex eep lss sym	305	build: elf hex eep lss sym
302		306
303	elf: $(TARGET).elf	307	elf: $(TARGET).elf
304	hex: $(TARGET).hex	308	hex: $(TARGET).hex
305	eep: $(TARGET).eep	309	eep: $(TARGET).eep
306	lss: $(TARGET).lss	310	lss: $(TARGET).lss
307	sym: $(TARGET).sym	311	sym: $(TARGET).sym
308		312
309		313
310		314
311	# Eye candy.	315	# Eye candy.
312	# AVR Studio 3.x does not check make's exit code but relies on	316	# AVR Studio 3.x does not check make's exit code but relies on
313	# the following magic strings to be generated by the compile job.	317	# the following magic strings to be generated by the compile job.
314	begin:	318	begin:
315	@echo	319	@echo
316	@echo $(MSG_BEGIN)	320	@echo $(MSG_BEGIN)
317		321
318	finished:	322	finished:
319	@echo $(MSG_ERRORS_NONE)	323	@echo $(MSG_ERRORS_NONE)
320		324
321	end:	325	end:
322	@echo $(MSG_END)	326	@echo $(MSG_END)
323	@echo	327	@echo
324		328
325		329
326	# Display size of file.	330	# Display size of file.
327	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex	331	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
328	ELFSIZE = $(SIZE) -A $(TARGET).elf	332	ELFSIZE = $(SIZE) -A $(TARGET).elf
329	sizebefore:	333	sizebefore:
330	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi	334	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
331		335
332	sizeafter:	336	sizeafter:
333	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi	337	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
334		338
335		339
336		340
337	# Display compiler version information.	341	# Display compiler version information.
338	gccversion :	342	gccversion :
339	@$(CC) --version	343	@$(CC) --version
340		344
341		345
342		346
343	# Program the device.	347	# Program the device.
344	program: $(TARGET).hex $(TARGET).eep	348	program: $(TARGET).hex $(TARGET).eep
345	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)	349	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
346		350
347	#programlock:	351	#programlock:
348	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m	352	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
349		353
350	#programinit:	354	#programinit:
351	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m	355	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
352		356
353	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.	357	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
354	COFFCONVERT=$(OBJCOPY) --debugging \	358	COFFCONVERT=$(OBJCOPY) --debugging \
355	--change-section-address .data-0x800000 \	359	--change-section-address .data-0x800000 \
356	--change-section-address .bss-0x800000 \	360	--change-section-address .bss-0x800000 \
357	--change-section-address .noinit-0x800000 \	361	--change-section-address .noinit-0x800000 \
358	--change-section-address .eeprom-0x810000	362	--change-section-address .eeprom-0x810000
359		363
360		364
361	coff: $(TARGET).elf	365	coff: $(TARGET).elf
362	@echo	366	@echo
363	@echo $(MSG_COFF) $(TARGET).cof	367	@echo $(MSG_COFF) $(TARGET).cof
364	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof	368	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
365		369
366		370
367	extcoff: $(TARGET).elf	371	extcoff: $(TARGET).elf
368	@echo	372	@echo
369	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof	373	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
370	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof	374	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
371		375
372		376
373		377
374	# Create final output files (.hex, .eep) from ELF output file.	378	# Create final output files (.hex, .eep) from ELF output file.
375	%.hex: %.elf	379	%.hex: %.elf
376	@echo	380	@echo
377	@echo $(MSG_FLASH) $@	381	@echo $(MSG_FLASH) $@
378	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@	382	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
379		383
380	%.eep: %.elf	384	%.eep: %.elf
381	@echo	385	@echo
382	@echo $(MSG_EEPROM) $@	386	@echo $(MSG_EEPROM) $@
383	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \	387	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
384	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@	388	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
385		389
386	# Create extended listing file from ELF output file.	390	# Create extended listing file from ELF output file.
387	%.lss: %.elf	391	%.lss: %.elf
388	@echo	392	@echo
389	@echo $(MSG_EXTENDED_LISTING) $@	393	@echo $(MSG_EXTENDED_LISTING) $@
390	$(OBJDUMP) -h -S $< > $@	394	$(OBJDUMP) -h -S $< > $@
391		395
392	# Create a symbol table from ELF output file.	396	# Create a symbol table from ELF output file.
393	%.sym: %.elf	397	%.sym: %.elf
394	@echo	398	@echo
395	@echo $(MSG_SYMBOL_TABLE) $@	399	@echo $(MSG_SYMBOL_TABLE) $@
396	$(NM) -n $< > $@	400	$(NM) -n $< > $@
397		401
398		402
399		403
400	# Link: create ELF output file from object files.	404	# Link: create ELF output file from object files.
401	.SECONDARY : $(TARGET).elf	405	.SECONDARY : $(TARGET).elf
402	.PRECIOUS : $(OBJ)	406	.PRECIOUS : $(OBJ)
403	%.elf: $(OBJ)	407	%.elf: $(OBJ)
404	@echo	408	@echo
405	@echo $(MSG_LINKING) $@	409	@echo $(MSG_LINKING) $@
406	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)	410	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
407		411
408		412
409	# Compile: create object files from C source files.	413	# Compile: create object files from C source files.
410	%.o : %.c	414	%.o : %.c
411	@echo	415	@echo
412	@echo $(MSG_COMPILING) $<	416	@echo $(MSG_COMPILING) $<
413	$(CC) -c $(ALL_CFLAGS) $< -o $@	417	$(CC) -c $(ALL_CFLAGS) $< -o $@
414		418
415		419
416	# Compile: create assembler files from C source files.	420	# Compile: create assembler files from C source files.
417	%.s : %.c	421	%.s : %.c
418	$(CC) -S $(ALL_CFLAGS) $< -o $@	422	$(CC) -S $(ALL_CFLAGS) $< -o $@
419		423
420		424
421	# Assemble: create object files from assembler source files.	425	# Assemble: create object files from assembler source files.
422	%.o : %.S	426	%.o : %.S
423	@echo	427	@echo
424	@echo $(MSG_ASSEMBLING) $<	428	@echo $(MSG_ASSEMBLING) $<
425	$(CC) -c $(ALL_ASFLAGS) $< -o $@	429	$(CC) -c $(ALL_ASFLAGS) $< -o $@
426		430
427		431
428		432
429	# Target: clean project.	433	# Target: clean project.
430	clean: begin clean_list finished end	434	clean: begin clean_list finished end
431		435
432	clean_list :	436	clean_list :
433	@echo	437	@echo
434	@echo $(MSG_CLEANING)	438	@echo $(MSG_CLEANING)
435	$(REMOVE) $(TARGET).hex	439	$(REMOVE) $(TARGET).hex
436	$(REMOVE) $(TARGET).eep	440	$(REMOVE) $(TARGET).eep
437	$(REMOVE) $(TARGET).obj	441	$(REMOVE) $(TARGET).obj
438	$(REMOVE) $(TARGET).cof	442	$(REMOVE) $(TARGET).cof
439	$(REMOVE) $(TARGET).elf	443	$(REMOVE) $(TARGET).elf
440	$(REMOVE) $(TARGET).map	444	$(REMOVE) $(TARGET).map
441	$(REMOVE) $(TARGET).obj	445	$(REMOVE) $(TARGET).obj
442	$(REMOVE) $(TARGET).a90	446	$(REMOVE) $(TARGET).a90
443	$(REMOVE) $(TARGET).sym	447	$(REMOVE) $(TARGET).sym
444	$(REMOVE) $(TARGET).lnk	448	$(REMOVE) $(TARGET).lnk
445	$(REMOVE) $(TARGET).lss	449	$(REMOVE) $(TARGET).lss
446	$(REMOVE) $(OBJ)	450	$(REMOVE) $(OBJ)
447	$(REMOVE) $(LST)	451	$(REMOVE) $(LST)
448	$(REMOVE) $(SRC:.c=.s)	452	$(REMOVE) $(SRC:.c=.s)
449	$(REMOVE) $(SRC:.c=.d)	453	$(REMOVE) $(SRC:.c=.d)
450	$(REMOVE) .dep/*	454	$(REMOVE) .dep/*
451		455
452		456
453		457
454	# Include the dependency files.	458	# Include the dependency files.
455	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)	459	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
456		460
457		461
458	# Listing of phony targets.	462	# Listing of phony targets.
459	.PHONY : all begin finish end sizebefore sizeafter gccversion \	463	.PHONY : all begin finish end sizebefore sizeafter gccversion \
460	build elf hex eep lss sym coff extcoff \	464	build elf hex eep lss sym coff extcoff \
461	clean clean_list program programlock programinit	465	clean clean_list program programlock programinit
462		466

Subversion Repositories HomeAutomation

(root)/trunk/EmbeddedSoftware/AVR/CanSensors/makefile @ 261 – Rev 239 → 255