WebSVN – HomeAutomation – Diff – /trunk/EmbeddedSoftware/AVR/CanSensors/makefile



# Hey Emacs, this is a -*- makefile -*-
#
# WinAVR makefile written by Eric B. Weddington, Jörg Wunsch, et al.
# Released to the Public Domain
# Please read the make user manual!
#
# Additional material for this makefile was submitted by:
#  Tim Henigan

##F_OSC = 1843200
##F_OSC = 2000000
##F_OSC = 3686400
##F_OSC = 4000000
F_OSC = 8000000
#F_OSC = 11059200
##F_OSC = 16000000
 
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
 
 
# Target file name (without extension).
TARGET = main
 
LIBDIR = ../lib/src/
 
 
# List C source files here. (C dependencies are automatically generated.)
SRC =	$(TARGET).c\
		$(LIBDIR)mcu/mcu.c\
		$(LIBDIR)mcu/serial.c\
		$(LIBDIR)mcu/uart.c\
		$(LIBDIR)mcu/timebase.c\
		$(LIBDIR)can/can.c\
		$(LIBDIR)can/mcp2515/mcp2515.c\
 
 
		$(LIBDIR)sensor/ds18s20/ds18x20.c\
		$(LIBDIR)sensor/ds18s20/crc8.c\
		$(LIBDIR)sensor/ds18s20/delay.c\
		$(LIBDIR)sensor/ds18s20/onewire.c\
		$(LIBDIR)sensor/tc1047/tc1047.c\
 
 
# List Assembler source files here.
# Make them always end in a capital .S.  Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!

 
# Debugging format.
# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
#DEBUG = stabs
DEBUG = dwarf-2
 
# List any extra directories to look for include files here.
#     Each directory must be seperated by a space.
EXTRAINCDIRS = 	$(LIBDIR)/can\
				$(LIBDIR)/can/mcp2515\
				$(LIBDIR)/mcu\
				$(LIBDIR)/../funcdefs\
				$(LIBDIR)/sensor/ds18s20 \
				$(LIBDIR)/sensor/tc1047 \
 
# Compiler flag to set the C Standard level.
# c89   - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99   - ISO C99 standard (not yet fully implemented)

# Compiler flags.
#  -g*:          generate debugging information
#  -O*:          optimization level
#  -f...:        tuning, see GCC manual and avr-libc documentation
#  -Wall...:     warning level
#  -Wa,...:      tell GCC to pass this to the assembler.
#    -adhlns...: create assembler listing
CFLAGS = 
#CFLAGS += -g$(DEBUG)
CFLAGS += $(CDEFS) $(CINCS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wstrict-prototypes
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
CFLAGS += -DF_OSC=$(F_OSC)
 
 
 
# Assembler flags.
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing

PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
PRINTF_LIB = $(PRINTF_LIB_MIN)
 
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)

#
AVRDUDE_PROGRAMMER = avrispv2
 
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = /dev/ttyUSB0    # programmer connected to serial device
AVRDUDE_BAUD = 115200
 
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 
 

 
# Increase verbosity level.  Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
 
 
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 
 
 

Rev 239	Rev 255
Line 1...	Line 1...
1	# Hey Emacs, this is a -- makefile --	1	# Hey Emacs, this is a -- makefile --
2	#	2	#
3	# WinAVR makefile written by Eric B. Weddington, ~~J�rg~~ Wunsch, et al.	3	# WinAVR makefile written by Eric B. Weddington, Jörg Wunsch, et al.
4	# Released to the Public Domain	4	# Released to the Public Domain
5	# Please read the make user manual!	5	# Please read the make user manual!
6	#	6	#
7	# Additional material for this makefile was submitted by:	7	# Additional material for this makefile was submitted by:
8	# Tim Henigan	8	# Tim Henigan
Line 48...	Line 48...
48	##F_OSC = 1843200	48	##F_OSC = 1843200
49	##F_OSC = 2000000	49	##F_OSC = 2000000
50	##F_OSC = 3686400	50	##F_OSC = 3686400
51	##F_OSC = 4000000	51	##F_OSC = 4000000
52	F_OSC = 8000000	52	F_OSC = 8000000
53	~~##F_OSC~~ = 11059200	53	#F_OSC = 11059200
54	##F_OSC = 16000000	54	##F_OSC = 16000000
55		55
56	# Output format. (can be srec, ihex, binary)	56	# Output format. (can be srec, ihex, binary)
57	FORMAT = ihex	57	FORMAT = ihex
58		58
59		59
60	# Target file name (without extension).	60	# Target file name (without extension).
61	TARGET = main	61	TARGET = main
62		62
63	LIBDIR = ../lib/src/	63	LIBDIR = ../lib/src/
64		-
65		64
66	# List C source files here. (C dependencies are automatically generated.)	65	# List C source files here. (C dependencies are automatically generated.)
67	SRC = $(TARGET).c\	66	SRC = $(TARGET).c\
68	$(LIBDIR)mcu/mcu.c\	67	$(LIBDIR)mcu/mcu.c\
69	$(LIBDIR)mcu/serial.c\	68	$(LIBDIR)mcu/serial.c\
70	$(LIBDIR)mcu/uart.c\	69	$(LIBDIR)mcu/uart.c\
71	$(LIBDIR)mcu/timebase.c\	70	$(LIBDIR)mcu/timebase.c\
72	$(LIBDIR)can/can.c\	71	$(LIBDIR)can/can.c\
73	$(LIBDIR)can/mcp2515/mcp2515.c\	72	$(LIBDIR)can/mcp2515/mcp2515.c\
74	$(LIBDIR)sensor/ds18s20/onewire.c\	-
75	$(LIBDIR)sensor/ds18s20/delay.c\	-
76	$(LIBDIR)sensor/ds18s20/ds18x20.c\	73	$(LIBDIR)sensor/ds18s20/ds18x20.c\
77	$(LIBDIR)sensor/ds18s20/crc8.c\	74	$(LIBDIR)sensor/ds18s20/crc8.c\
-		75	$(LIBDIR)sensor/ds18s20/delay.c\
-		76	$(LIBDIR)sensor/ds18s20/onewire.c\
78	$(LIBDIR)sensor/tc1047/tc1047.c\	77	$(LIBDIR)sensor/tc1047/tc1047.c\
79	$(LIBDIR)sensor/sht7x/sht7x.c	-
80		78
81	# List Assembler source files here.	79	# List Assembler source files here.
82	# Make them always end in a capital .S. Files ending in a lowercase .s	80	# Make them always end in a capital .S. Files ending in a lowercase .s
83	# will not be considered source files but generated files (assembler	81	# will not be considered source files but generated files (assembler
84	# output from the compiler), and will be deleted upon "make clean"!	82	# output from the compiler), and will be deleted upon "make clean"!
Line 96...	Line 94...
96		94
97	# Debugging format.	95	# Debugging format.
98	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.	96	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
99	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.	97	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
100	#DEBUG = stabs	98	#DEBUG = stabs
101	DEBUG =	99	DEBUG = dwarf-2
102		100
103	# List any extra directories to look for include files here.	101	# List any extra directories to look for include files here.
104	# Each directory must be seperated by a space.	102	# Each directory must be seperated by a space.
105	EXTRAINCDIRS = $(LIBDIR)/~~can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu $(LIBDIR)/sensor/ds18s20 $(LIBDIR)/sensor/tc1047 $(LIBDIR)/sensor/sht7x $(LIBDIR)/../funcdefs~~	103	EXTRAINCDIRS = $(LIBDIR)/can\
-		104	$(LIBDIR)/can/mcp2515\
-		105	$(LIBDIR)/mcu\
-		106	$(LIBDIR)/../funcdefs\
-		107	$(LIBDIR)/sensor/ds18s20 \
-		108	$(LIBDIR)/sensor/tc1047 \
106		109
107	# Compiler flag to set the C Standard level.	110	# Compiler flag to set the C Standard level.
108	# c89 - "ANSI" C	111	# c89 - "ANSI" C
109	# gnu89 - c89 plus GCC extensions	112	# gnu89 - c89 plus GCC extensions
110	# c99 - ISO C99 standard (not yet fully implemented)	113	# c99 - ISO C99 standard (not yet fully implemented)
Line 121...	Line 124...
121	# Compiler flags.	124	# Compiler flags.
122	# -g*: generate debugging information	125	# -g*: generate debugging information
123	# -O*: optimization level	126	# -O*: optimization level
124	# -f...: tuning, see GCC manual and avr-libc documentation	127	# -f...: tuning, see GCC manual and avr-libc documentation
125	# -Wall...: warning level	128	# -Wall...: warning level
126	# -Wa,...: tell GCC to pass this to the assembler.	129	# -Wa,...: tell GCC to pass this to the assembler.
127	# -adhlns...: create assembler listing	130	# -adhlns...: create assembler listing
-		131	CFLAGS =
128	~~CFLAGS~~ = -g$(DEBUG)	132	#CFLAGS += -g$(DEBUG)
129	CFLAGS += $(CDEFS) $(CINCS)	133	CFLAGS += $(CDEFS) $(CINCS)
130	CFLAGS += -O$(OPT)	134	CFLAGS += -O$(OPT)
131	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums	135	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
132	CFLAGS += -Wall -Wstrict-prototypes	136	CFLAGS += -Wall -Wstrict-prototypes
133	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)	137	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
134	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))	138	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
135	CFLAGS += $(CSTANDARD)	139	CFLAGS += $(CSTANDARD)
136	CFLAGS += -DF_OSC=$(F_OSC)	140	CFLAGS += -DF_OSC=$(F_OSC)
137		-
138		141
139		142
140	# Assembler flags.	143	# Assembler flags.
141	# -Wa,...: tell GCC to pass this to the assembler.	144	# -Wa,...: tell GCC to pass this to the assembler.
142	# -ahlms: create listing	145	# -ahlms: create listing
Line 155...	Line 158...
155	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min	158	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
156		159
157	# Floating point printf version (requires MATH_LIB = -lm below)	160	# Floating point printf version (requires MATH_LIB = -lm below)
158	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt	161	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
159		162
160	PRINTF_LIB =	163	PRINTF_LIB = $(PRINTF_LIB_MIN)
161		164
162	# Minimalistic scanf version	165	# Minimalistic scanf version
163	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min	166	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
164		167
165	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)	168	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
Line 202...	Line 205...
202	#	205	#
203	AVRDUDE_PROGRAMMER = avrispv2	206	AVRDUDE_PROGRAMMER = avrispv2
204		207
205	# com1 = serial port. Use lpt1 to connect to parallel port.	208	# com1 = serial port. Use lpt1 to connect to parallel port.
206	AVRDUDE_PORT = /dev/ttyUSB0 # programmer connected to serial device	209	AVRDUDE_PORT = /dev/ttyUSB0 # programmer connected to serial device
-		210	AVRDUDE_BAUD = 115200
207		211
208	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex	212	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
209	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep	213	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
210		214
211		215
Line 220...	Line 224...
220		224
221	# Increase verbosity level. Please use this when submitting bug	225	# Increase verbosity level. Please use this when submitting bug
222	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>	226	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
223	# to submit bug reports.	227	# to submit bug reports.
224	#AVRDUDE_VERBOSE = -v -v	228	#AVRDUDE_VERBOSE = -v -v
225	#-b $(AVRDUDE_BAUD)	-
-		229
226	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)	230	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
227	~~#AVRDUDE_FLAGS~~ += $(AVRDUDE_NO_VERIFY)	231	AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
228	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)	232	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
229	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)	233	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
230		234
231		235
232		236

Subversion Repositories HomeAutomation

(root)/trunk/EmbeddedSoftware/AVR/CanSensors/makefile @ 261 – Rev 239 → 255