WebSVN – HomeAutomation – Diff – /trunk/EmbeddedSoftware/AVR/CanTestCan/makefile


# Hey Emacs, this is a -*- makefile -*-
#
# WinAVR makefile written by Eric B. Weddington, Jrg Wunsch, et al.
# Released to the Public Domain
# Please read the make user manual!
#
# Additional material for this makefile was submitted by:
#  Tim Henigan
#  Peter Fleury
#  Reiner Patommel
#  Sander Pool
#  Frederik Rouleau
#  Markus Pfaff
#
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
#
# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
#                4.07 or greater).
#
# make program = Download the hex file to the device, using avrdude.  Please
#                customize the avrdude settings below first!
#
# make filename.s = Just compile filename.c into the assembler code only
#
# To rebuild project do "make clean" then "make all".
#
 
########
# Differences from WinAVR 20040720 sample:
# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
# - F_OSC Define in CFLAGS and AFLAGS
 
 
# MCU name
#MCU = atmega8
#MCU = atmega88
MCU = atmega168
 
 
# Main Oscillator Frequency
#F_CPU = 1000000
 
 
 
 
F_CPU = 8000000
#F_CPU = 16000000
#F_CPU = 20000000
 
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
 
 
# Target file name (without extension).
TARGET = main
 
LIBDIR = ../lib/src/
 
 
# List C source files here. (C dependencies are automatically generated.)
SRC =	$(TARGET).c\
		$(LIBDIR)mcu/mcu.c\
 
 
		$(LIBDIR)mcu/timebase.c\
		$(LIBDIR)can/can.c\
		$(LIBDIR)can/mcp2515/mcp2515.c
 
# List Assembler source files here.
# Make them always end in a capital .S.  Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = 
 
 
# Optimization level, can be [0, 1, 2, 3, s]. 
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
#OPT = 3
 
# Debugging format.
# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
#DEBUG = stabs
DEBUG = dwarf-2
 
# List any extra directories to look for include files here.
#     Each directory must be seperated by a space.
EXTRAINCDIRS = $(LIBDIR)/can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu
 
# Compiler flag to set the C Standard level.
# c89   - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99   - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
 
# Place -D or -U options here
CDEFS =
 
# Place -I options here
CINCS =
 
 
# Compiler flags.
#  -g*:          generate debugging information
#  -O*:          optimization level
#  -f...:        tuning, see GCC manual and avr-libc documentation
#  -Wall...:     warning level
#  -Wa,...:      tell GCC to pass this to the assembler.
#    -adhlns...: create assembler listing
CFLAGS = 
#CFLAGS += -g$(DEBUG)
CFLAGS += $(CDEFS) $(CINCS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wstrict-prototypes
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
CFLAGS += -DF_CPU=$(F_CPU)
 
 
 
# Assembler flags.
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing
#  -gstabs:   have the assembler create line number information; note that
#             for use in COFF files, additional information about filenames
#             and function names needs to be present in the assembler source
#             files -- see avr-libc docs [FIXME: not yet described there]
##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
ASFLAGS += -DF_CPU=$(F_CPU)
 
 
#Additional libraries.
 
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
PRINTF_LIB = $(PRINTF_LIB_MIN)
 
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
SCANF_LIB = 
 
MATH_LIB = -lm
 
# External memory options
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
 
EXTMEMOPTS =
 
# Linker flags.
#  -Wl,...:     tell GCC to pass this to linker.
#    -Map:      create map file
#    --cref:    add cross reference to  map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 
 
 
 
# Programming support using avrdude. Settings and variables.
 
# Programming hardware: alf avr910 avrisp bascom bsd 
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = avrispv2
 
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = com1    # programmer connected to serial device
AVRDUDE_BAUD = 115200
 
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 
 
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
 
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
 
# Increase verbosity level.  Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
 
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 
 
 
# ---------------------------------------------------------------------------
 
# Define directories, if needed.
DIRAVR = c:/progra~1/winavr
DIRAVRBIN = $(DIRAVR)/bin
DIRAVRUTILS = $(DIRAVR)/utils/bin
DIRINC = .
DIRLIB = $(DIRAVR)/avr/lib
 
 
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
COPY = cp
 
 
 
 
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = --------  end  --------
MSG_SIZE_BEFORE = Size before: 
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
 
 
 
 
# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
 
# Define all listing files.
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
 
 
# Compiler flags to generate dependency files.
### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
 
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 
 
 
# Default target.
all: begin gccversion sizebefore build sizeafter finished end
 
build: elf hex eep lss sym
 
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss 
sym: $(TARGET).sym
 
 
 
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
	@echo
	@echo $(MSG_BEGIN)
 
finished:
	@echo $(MSG_ERRORS_NONE)
 
end:
	@echo $(MSG_END)
	@echo
 
 
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf
sizebefore:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
 
sizeafter:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
 
 
 
# Display compiler version information.
gccversion : 
	@$(CC) --version
 
 
 
# Program the device.  
program: $(TARGET).hex $(TARGET).eep
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
#programlock: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
 
#programinit: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
 
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .data-0x800000 \
--change-section-address .bss-0x800000 \
--change-section-address .noinit-0x800000 \
--change-section-address .eeprom-0x810000 
 
 
coff: $(TARGET).elf
	@echo
	@echo $(MSG_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 
 
extcoff: $(TARGET).elf
	@echo
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 
 
 
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
	@echo
	@echo $(MSG_FLASH) $@
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 
%.eep: %.elf
	@echo
	@echo $(MSG_EEPROM) $@
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
# Create extended listing file from ELF output file.
%.lss: %.elf
	@echo
	@echo $(MSG_EXTENDED_LISTING) $@
	$(OBJDUMP) -h -S $< > $@
 
# Create a symbol table from ELF output file.
%.sym: %.elf
	@echo
	@echo $(MSG_SYMBOL_TABLE) $@
	$(NM) -n $< > $@
 
 
 
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
	@echo
	@echo $(MSG_LINKING) $@
	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
 
 
# Compile: create object files from C source files.
%.o : %.c
	@echo
	@echo $(MSG_COMPILING) $<
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
 
 
# Compile: create assembler files from C source files.
%.s : %.c
	$(CC) -S $(ALL_CFLAGS) $< -o $@
 
 
# Assemble: create object files from assembler source files.
%.o : %.S
	@echo
	@echo $(MSG_ASSEMBLING) $<
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
 
 
 
# Target: clean project.
clean: begin clean_list finished end
 
clean_list :
	@echo
	@echo $(MSG_CLEANING)
	$(REMOVE) $(TARGET).hex
	$(REMOVE) $(TARGET).eep
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).cof
	$(REMOVE) $(TARGET).elf
	$(REMOVE) $(TARGET).map
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).a90
	$(REMOVE) $(TARGET).sym
	$(REMOVE) $(TARGET).lnk
	$(REMOVE) $(TARGET).lss
	$(REMOVE) $(OBJ)
	$(REMOVE) $(LST)
	$(REMOVE) $(SRC:.c=.s)
	$(REMOVE) $(SRC:.c=.d)
	$(REMOVE) .dep/*
 
 
 
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 
 
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list program programlock programinit
 

Rev 385	Rev 386
1	# Hey Emacs, this is a -- makefile --	1	# Hey Emacs, this is a -- makefile --
2	#	2	#
3	# WinAVR makefile written by Eric B. Weddington, ~~Jörg~~ Wunsch, et al.	3	# WinAVR makefile written by Eric B. Weddington, Jrg Wunsch, et al.
4	# Released to the Public Domain	4	# Released to the Public Domain
5	# Please read the make user manual!	5	# Please read the make user manual!
6	#	6	#
7	# Additional material for this makefile was submitted by:	7	# Additional material for this makefile was submitted by:
8	# Tim Henigan	8	# Tim Henigan
9	# Peter Fleury	9	# Peter Fleury
10	# Reiner Patommel	10	# Reiner Patommel
11	# Sander Pool	11	# Sander Pool
12	# Frederik Rouleau	12	# Frederik Rouleau
13	# Markus Pfaff	13	# Markus Pfaff
14	#	14	#
15	# On command line:	15	# On command line:
16	#	16	#
17	# make all = Make software.	17	# make all = Make software.
18	#	18	#
19	# make clean = Clean out built project files.	19	# make clean = Clean out built project files.
20	#	20	#
21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).	21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
22	#	22	#
23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio	23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
24	# 4.07 or greater).	24	# 4.07 or greater).
25	#	25	#
26	# make program = Download the hex file to the device, using avrdude. Please	26	# make program = Download the hex file to the device, using avrdude. Please
27	# customize the avrdude settings below first!	27	# customize the avrdude settings below first!
28	#	28	#
29	# make filename.s = Just compile filename.c into the assembler code only	29	# make filename.s = Just compile filename.c into the assembler code only
30	#	30	#
31	# To rebuild project do "make clean" then "make all".	31	# To rebuild project do "make clean" then "make all".
32	#	32	#
33		33
34	########	34	########
35	# Differences from WinAVR 20040720 sample:	35	# Differences from WinAVR 20040720 sample:
36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)	36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
37	# - F_OSC Define in CFLAGS and AFLAGS	37	# - F_OSC Define in CFLAGS and AFLAGS
38		38
39		39
40	# MCU name	40	# MCU name
41	#MCU = ~~atmega32~~	41	#MCU = atmega8
42	~~MCU~~ = atmega88	42	#MCU = atmega88
43	~~#MCU~~ = ~~atmega16~~	43	MCU = atmega168
44		44
45		45
46	# Main Oscillator Frequency	46	# Main Oscillator Frequency
47	~~##F_OSC~~ = 1000000	47	#F_CPU = 1000000
48	##F_OSC = 1843200	-
49	##F_OSC = 2000000	-
50	##F_OSC = 3686400	-
51	##F_OSC = 4000000	-
52	~~F_OSC~~ = 8000000	48	F_CPU = 8000000
53	~~##F_OSC~~ = ~~11059200~~	49	#F_CPU = 16000000
54	~~##F_OSC~~ = ~~16000000~~	50	#F_CPU = 20000000
55		51
56	# Output format. (can be srec, ihex, binary)	52	# Output format. (can be srec, ihex, binary)
57	FORMAT = ihex	53	FORMAT = ihex
58		54
59		55
60	# Target file name (without extension).	56	# Target file name (without extension).
61	TARGET = main	57	TARGET = main
62		58
63	LIBDIR = ../lib/src/	59	LIBDIR = ../lib/src/
64		60
65		61
66	# List C source files here. (C dependencies are automatically generated.)	62	# List C source files here. (C dependencies are automatically generated.)
67	SRC = $(TARGET).c\	63	SRC = $(TARGET).c\
68	$(LIBDIR)mcu/mcu.c\	64	$(LIBDIR)mcu/mcu.c\
69	$(LIBDIR)mcu/serial.c\	-
70	$(LIBDIR)mcu/uart.c\	-
71	$(LIBDIR)mcu/timebase.c\	65	$(LIBDIR)mcu/timebase.c\
72	$(LIBDIR)can/can.c\	66	$(LIBDIR)can/can.c\
73	$(LIBDIR)can/mcp2515/mcp2515.c	67	$(LIBDIR)can/mcp2515/mcp2515.c
74		68
75	# List Assembler source files here.	69	# List Assembler source files here.
76	# Make them always end in a capital .S. Files ending in a lowercase .s	70	# Make them always end in a capital .S. Files ending in a lowercase .s
77	# will not be considered source files but generated files (assembler	71	# will not be considered source files but generated files (assembler
78	# output from the compiler), and will be deleted upon "make clean"!	72	# output from the compiler), and will be deleted upon "make clean"!
79	# Even though the DOS/Win* filesystem matches both .s and .S the same,	73	# Even though the DOS/Win* filesystem matches both .s and .S the same,
80	# it will preserve the spelling of the filenames, and gcc itself does	74	# it will preserve the spelling of the filenames, and gcc itself does
81	# care about how the name is spelled on its command-line.	75	# care about how the name is spelled on its command-line.
82	ASRC =	76	ASRC =
83		77
84		78
85	# Optimization level, can be [0, 1, 2, 3, s].	79	# Optimization level, can be [0, 1, 2, 3, s].
86	# 0 = turn off optimization. s = optimize for size.	80	# 0 = turn off optimization. s = optimize for size.
87	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)	81	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
88	OPT = s	82	OPT = s
89	#OPT = 3	83	#OPT = 3
90		84
91	# Debugging format.	85	# Debugging format.
92	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.	86	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
93	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.	87	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
94	#DEBUG = stabs	88	#DEBUG = stabs
95	DEBUG = dwarf-2	89	DEBUG = dwarf-2
96		90
97	# List any extra directories to look for include files here.	91	# List any extra directories to look for include files here.
98	# Each directory must be seperated by a space.	92	# Each directory must be seperated by a space.
99	EXTRAINCDIRS = $(LIBDIR)/can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu	93	EXTRAINCDIRS = $(LIBDIR)/can $(LIBDIR)/can/mcp2515 $(LIBDIR)/mcu
100		94
101	# Compiler flag to set the C Standard level.	95	# Compiler flag to set the C Standard level.
102	# c89 - "ANSI" C	96	# c89 - "ANSI" C
103	# gnu89 - c89 plus GCC extensions	97	# gnu89 - c89 plus GCC extensions
104	# c99 - ISO C99 standard (not yet fully implemented)	98	# c99 - ISO C99 standard (not yet fully implemented)
105	# gnu99 - c99 plus GCC extensions	99	# gnu99 - c99 plus GCC extensions
106	CSTANDARD = -std=gnu99	100	CSTANDARD = -std=gnu99
107		101
108	# Place -D or -U options here	102	# Place -D or -U options here
109	CDEFS =	103	CDEFS =
110		104
111	# Place -I options here	105	# Place -I options here
112	CINCS =	106	CINCS =
113		107
114		108
115	# Compiler flags.	109	# Compiler flags.
116	# -g*: generate debugging information	110	# -g*: generate debugging information
117	# -O*: optimization level	111	# -O*: optimization level
118	# -f...: tuning, see GCC manual and avr-libc documentation	112	# -f...: tuning, see GCC manual and avr-libc documentation
119	# -Wall...: warning level	113	# -Wall...: warning level
120	# -Wa,...: tell GCC to pass this to the assembler.	114	# -Wa,...: tell GCC to pass this to the assembler.
121	# -adhlns...: create assembler listing	115	# -adhlns...: create assembler listing
122	CFLAGS =	116	CFLAGS =
123	#CFLAGS += -g$(DEBUG)	117	#CFLAGS += -g$(DEBUG)
124	CFLAGS += $(CDEFS) $(CINCS)	118	CFLAGS += $(CDEFS) $(CINCS)
125	CFLAGS += -O$(OPT)	119	CFLAGS += -O$(OPT)
126	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums	120	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
127	CFLAGS += -Wall -Wstrict-prototypes	121	CFLAGS += -Wall -Wstrict-prototypes
128	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)	122	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
129	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))	123	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
130	CFLAGS += $(CSTANDARD)	124	CFLAGS += $(CSTANDARD)
131	CFLAGS += -~~DF_OSC=$~~(~~F_OSC~~)	125	CFLAGS += -DF_CPU=$(F_CPU)
132		126
133		127
134		128
135	# Assembler flags.	129	# Assembler flags.
136	# -Wa,...: tell GCC to pass this to the assembler.	130	# -Wa,...: tell GCC to pass this to the assembler.
137	# -ahlms: create listing	131	# -ahlms: create listing
138	# -gstabs: have the assembler create line number information; note that	132	# -gstabs: have the assembler create line number information; note that
139	# for use in COFF files, additional information about filenames	133	# for use in COFF files, additional information about filenames
140	# and function names needs to be present in the assembler source	134	# and function names needs to be present in the assembler source
141	# files -- see avr-libc docs [FIXME: not yet described there]	135	# files -- see avr-libc docs [FIXME: not yet described there]
142	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs	136	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
143	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)	137	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
144	ASFLAGS += -~~DF_OSC=$~~(~~F_OSC~~)	138	ASFLAGS += -DF_CPU=$(F_CPU)
145		139
146		140
147	#Additional libraries.	141	#Additional libraries.
148		142
149	# Minimalistic printf version	143	# Minimalistic printf version
150	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min	144	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
151		145
152	# Floating point printf version (requires MATH_LIB = -lm below)	146	# Floating point printf version (requires MATH_LIB = -lm below)
153	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt	147	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
154		148
155	PRINTF_LIB = $(PRINTF_LIB_MIN)	149	PRINTF_LIB = $(PRINTF_LIB_MIN)
156		150
157	# Minimalistic scanf version	151	# Minimalistic scanf version
158	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min	152	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
159		153
160	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)	154	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
161	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt	155	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
162		156
163	SCANF_LIB =	157	SCANF_LIB =
164		158
165	MATH_LIB = -lm	159	MATH_LIB = -lm
166		160
167	# External memory options	161	# External memory options
168		162
169	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	163	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
170	# used for variables (.data/.bss) and heap (malloc()).	164	# used for variables (.data/.bss) and heap (malloc()).
171	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff	165	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
172		166
173	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	167	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
174	# only used for heap (malloc()).	168	# only used for heap (malloc()).
175	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff	169	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
176		170
177	EXTMEMOPTS =	171	EXTMEMOPTS =
178		172
179	# Linker flags.	173	# Linker flags.
180	# -Wl,...: tell GCC to pass this to linker.	174	# -Wl,...: tell GCC to pass this to linker.
181	# -Map: create map file	175	# -Map: create map file
182	# --cref: add cross reference to map file	176	# --cref: add cross reference to map file
183	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref	177	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
184	LDFLAGS += $(EXTMEMOPTS)	178	LDFLAGS += $(EXTMEMOPTS)
185	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)	179	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
186		180
187		181
188		182
189		183
190	# Programming support using avrdude. Settings and variables.	184	# Programming support using avrdude. Settings and variables.
191		185
192	# Programming hardware: alf avr910 avrisp bascom bsd	186	# Programming hardware: alf avr910 avrisp bascom bsd
193	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500	187	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
194	#	188	#
195	# Type: avrdude -c ?	189	# Type: avrdude -c ?
196	# to get a full listing.	190	# to get a full listing.
197	#	191	#
198	AVRDUDE_PROGRAMMER = avrispv2	192	AVRDUDE_PROGRAMMER = avrispv2
199		193
200	# com1 = serial port. Use lpt1 to connect to parallel port.	194	# com1 = serial port. Use lpt1 to connect to parallel port.
201	AVRDUDE_PORT = com1 # programmer connected to serial device	195	AVRDUDE_PORT = com1 # programmer connected to serial device
202	AVRDUDE_BAUD = 115200	196	AVRDUDE_BAUD = 115200
203		197
204	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex	198	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
205	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep	199	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
206		200
207		201
208	# Uncomment the following if you want avrdude's erase cycle counter.	202	# Uncomment the following if you want avrdude's erase cycle counter.
209	# Note that this counter needs to be initialized first using -Yn,	203	# Note that this counter needs to be initialized first using -Yn,
210	# see avrdude manual.	204	# see avrdude manual.
211	#AVRDUDE_ERASE_COUNTER = -y	205	#AVRDUDE_ERASE_COUNTER = -y
212		206
213	# Uncomment the following if you do /not/ wish a verification to be	207	# Uncomment the following if you do /not/ wish a verification to be
214	# performed after programming the device.	208	# performed after programming the device.
215	#AVRDUDE_NO_VERIFY = -V	209	#AVRDUDE_NO_VERIFY = -V
216		210
217	# Increase verbosity level. Please use this when submitting bug	211	# Increase verbosity level. Please use this when submitting bug
218	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>	212	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
219	# to submit bug reports.	213	# to submit bug reports.
220	#AVRDUDE_VERBOSE = -v -v	214	#AVRDUDE_VERBOSE = -v -v
221		215
222	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)	216	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
223	AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)	217	AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
224	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)	218	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
225	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)	219	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
226		220
227		221
228		222
229	# ---------------------------------------------------------------------------	223	# ---------------------------------------------------------------------------
230		224
231	# Define directories, if needed.	225	# Define directories, if needed.
232	DIRAVR = c:/progra~1/winavr	226	DIRAVR = c:/progra~1/winavr
233	DIRAVRBIN = $(DIRAVR)/bin	227	DIRAVRBIN = $(DIRAVR)/bin
234	DIRAVRUTILS = $(DIRAVR)/utils/bin	228	DIRAVRUTILS = $(DIRAVR)/utils/bin
235	DIRINC = .	229	DIRINC = .
236	DIRLIB = $(DIRAVR)/avr/lib	230	DIRLIB = $(DIRAVR)/avr/lib
237		231
238		232
239	# Define programs and commands.	233	# Define programs and commands.
240	SHELL = sh	234	SHELL = sh
241	CC = avr-gcc	235	CC = avr-gcc
242	OBJCOPY = avr-objcopy	236	OBJCOPY = avr-objcopy
243	OBJDUMP = avr-objdump	237	OBJDUMP = avr-objdump
244	SIZE = avr-size	238	SIZE = avr-size
245	NM = avr-nm	239	NM = avr-nm
246	AVRDUDE = avrdude	240	AVRDUDE = avrdude
247	REMOVE = rm -f	241	REMOVE = rm -f
248	COPY = cp	242	COPY = cp
249		243
250		244
251		245
252		246
253	# Define Messages	247	# Define Messages
254	# English	248	# English
255	MSG_ERRORS_NONE = Errors: none	249	MSG_ERRORS_NONE = Errors: none
256	MSG_BEGIN = -------- begin --------	250	MSG_BEGIN = -------- begin --------
257	MSG_END = -------- end --------	251	MSG_END = -------- end --------
258	MSG_SIZE_BEFORE = Size before:	252	MSG_SIZE_BEFORE = Size before:
259	MSG_SIZE_AFTER = Size after:	253	MSG_SIZE_AFTER = Size after:
260	MSG_COFF = Converting to AVR COFF:	254	MSG_COFF = Converting to AVR COFF:
261	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:	255	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
262	MSG_FLASH = Creating load file for Flash:	256	MSG_FLASH = Creating load file for Flash:
263	MSG_EEPROM = Creating load file for EEPROM:	257	MSG_EEPROM = Creating load file for EEPROM:
264	MSG_EXTENDED_LISTING = Creating Extended Listing:	258	MSG_EXTENDED_LISTING = Creating Extended Listing:
265	MSG_SYMBOL_TABLE = Creating Symbol Table:	259	MSG_SYMBOL_TABLE = Creating Symbol Table:
266	MSG_LINKING = Linking:	260	MSG_LINKING = Linking:
267	MSG_COMPILING = Compiling:	261	MSG_COMPILING = Compiling:
268	MSG_ASSEMBLING = Assembling:	262	MSG_ASSEMBLING = Assembling:
269	MSG_CLEANING = Cleaning project:	263	MSG_CLEANING = Cleaning project:
270		264
271		265
272		266
273		267
274	# Define all object files.	268	# Define all object files.
275	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)	269	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
276		270
277	# Define all listing files.	271	# Define all listing files.
278	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)	272	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
279		273
280		274
281	# Compiler flags to generate dependency files.	275	# Compiler flags to generate dependency files.
282	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d	276	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
283	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d	277	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
284		278
285	# Combine all necessary flags and optional flags.	279	# Combine all necessary flags and optional flags.
286	# Add target processor to flags.	280	# Add target processor to flags.
287	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)	281	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
288	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)	282	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
289		283
290		284
291		285
292		286
293		287
294	# Default target.	288	# Default target.
295	all: begin gccversion sizebefore build sizeafter finished end	289	all: begin gccversion sizebefore build sizeafter finished end
296		290
297	build: elf hex eep lss sym	291	build: elf hex eep lss sym
298		292
299	elf: $(TARGET).elf	293	elf: $(TARGET).elf
300	hex: $(TARGET).hex	294	hex: $(TARGET).hex
301	eep: $(TARGET).eep	295	eep: $(TARGET).eep
302	lss: $(TARGET).lss	296	lss: $(TARGET).lss
303	sym: $(TARGET).sym	297	sym: $(TARGET).sym
304		298
305		299
306		300
307	# Eye candy.	301	# Eye candy.
308	# AVR Studio 3.x does not check make's exit code but relies on	302	# AVR Studio 3.x does not check make's exit code but relies on
309	# the following magic strings to be generated by the compile job.	303	# the following magic strings to be generated by the compile job.
310	begin:	304	begin:
311	@echo	305	@echo
312	@echo $(MSG_BEGIN)	306	@echo $(MSG_BEGIN)
313		307
314	finished:	308	finished:
315	@echo $(MSG_ERRORS_NONE)	309	@echo $(MSG_ERRORS_NONE)
316		310
317	end:	311	end:
318	@echo $(MSG_END)	312	@echo $(MSG_END)
319	@echo	313	@echo
320		314
321		315
322	# Display size of file.	316	# Display size of file.
323	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex	317	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
324	ELFSIZE = $(SIZE) -A $(TARGET).elf	318	ELFSIZE = $(SIZE) -A $(TARGET).elf
325	sizebefore:	319	sizebefore:
326	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi	320	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
327		321
328	sizeafter:	322	sizeafter:
329	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi	323	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
330		324
331		325
332		326
333	# Display compiler version information.	327	# Display compiler version information.
334	gccversion :	328	gccversion :
335	@$(CC) --version	329	@$(CC) --version
336		330
337		331
338		332
339	# Program the device.	333	# Program the device.
340	program: $(TARGET).hex $(TARGET).eep	334	program: $(TARGET).hex $(TARGET).eep
341	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)	335	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
342		336
343	#programlock:	337	#programlock:
344	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m	338	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
345		339
346	#programinit:	340	#programinit:
347	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m	341	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
348		342
349	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.	343	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
350	COFFCONVERT=$(OBJCOPY) --debugging \	344	COFFCONVERT=$(OBJCOPY) --debugging \
351	--change-section-address .data-0x800000 \	345	--change-section-address .data-0x800000 \
352	--change-section-address .bss-0x800000 \	346	--change-section-address .bss-0x800000 \
353	--change-section-address .noinit-0x800000 \	347	--change-section-address .noinit-0x800000 \
354	--change-section-address .eeprom-0x810000	348	--change-section-address .eeprom-0x810000
355		349
356		350
357	coff: $(TARGET).elf	351	coff: $(TARGET).elf
358	@echo	352	@echo
359	@echo $(MSG_COFF) $(TARGET).cof	353	@echo $(MSG_COFF) $(TARGET).cof
360	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof	354	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
361		355
362		356
363	extcoff: $(TARGET).elf	357	extcoff: $(TARGET).elf
364	@echo	358	@echo
365	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof	359	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
366	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof	360	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
367		361
368		362
369		363
370	# Create final output files (.hex, .eep) from ELF output file.	364	# Create final output files (.hex, .eep) from ELF output file.
371	%.hex: %.elf	365	%.hex: %.elf
372	@echo	366	@echo
373	@echo $(MSG_FLASH) $@	367	@echo $(MSG_FLASH) $@
374	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@	368	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
375		369
376	%.eep: %.elf	370	%.eep: %.elf
377	@echo	371	@echo
378	@echo $(MSG_EEPROM) $@	372	@echo $(MSG_EEPROM) $@
379	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \	373	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
380	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@	374	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
381		375
382	# Create extended listing file from ELF output file.	376	# Create extended listing file from ELF output file.
383	%.lss: %.elf	377	%.lss: %.elf
384	@echo	378	@echo
385	@echo $(MSG_EXTENDED_LISTING) $@	379	@echo $(MSG_EXTENDED_LISTING) $@
386	$(OBJDUMP) -h -S $< > $@	380	$(OBJDUMP) -h -S $< > $@
387		381
388	# Create a symbol table from ELF output file.	382	# Create a symbol table from ELF output file.
389	%.sym: %.elf	383	%.sym: %.elf
390	@echo	384	@echo
391	@echo $(MSG_SYMBOL_TABLE) $@	385	@echo $(MSG_SYMBOL_TABLE) $@
392	$(NM) -n $< > $@	386	$(NM) -n $< > $@
393		387
394		388
395		389
396	# Link: create ELF output file from object files.	390	# Link: create ELF output file from object files.
397	.SECONDARY : $(TARGET).elf	391	.SECONDARY : $(TARGET).elf
398	.PRECIOUS : $(OBJ)	392	.PRECIOUS : $(OBJ)
399	%.elf: $(OBJ)	393	%.elf: $(OBJ)
400	@echo	394	@echo
401	@echo $(MSG_LINKING) $@	395	@echo $(MSG_LINKING) $@
402	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)	396	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
403		397
404		398
405	# Compile: create object files from C source files.	399	# Compile: create object files from C source files.
406	%.o : %.c	400	%.o : %.c
407	@echo	401	@echo
408	@echo $(MSG_COMPILING) $<	402	@echo $(MSG_COMPILING) $<
409	$(CC) -c $(ALL_CFLAGS) $< -o $@	403	$(CC) -c $(ALL_CFLAGS) $< -o $@
410		404
411		405
412	# Compile: create assembler files from C source files.	406	# Compile: create assembler files from C source files.
413	%.s : %.c	407	%.s : %.c
414	$(CC) -S $(ALL_CFLAGS) $< -o $@	408	$(CC) -S $(ALL_CFLAGS) $< -o $@
415		409
416		410
417	# Assemble: create object files from assembler source files.	411	# Assemble: create object files from assembler source files.
418	%.o : %.S	412	%.o : %.S
419	@echo	413	@echo
420	@echo $(MSG_ASSEMBLING) $<	414	@echo $(MSG_ASSEMBLING) $<
421	$(CC) -c $(ALL_ASFLAGS) $< -o $@	415	$(CC) -c $(ALL_ASFLAGS) $< -o $@
422		416
423		417
424		418
425	# Target: clean project.	419	# Target: clean project.
426	clean: begin clean_list finished end	420	clean: begin clean_list finished end
427		421
428	clean_list :	422	clean_list :
429	@echo	423	@echo
430	@echo $(MSG_CLEANING)	424	@echo $(MSG_CLEANING)
431	$(REMOVE) $(TARGET).hex	425	$(REMOVE) $(TARGET).hex
432	$(REMOVE) $(TARGET).eep	426	$(REMOVE) $(TARGET).eep
433	$(REMOVE) $(TARGET).obj	427	$(REMOVE) $(TARGET).obj
434	$(REMOVE) $(TARGET).cof	428	$(REMOVE) $(TARGET).cof
435	$(REMOVE) $(TARGET).elf	429	$(REMOVE) $(TARGET).elf
436	$(REMOVE) $(TARGET).map	430	$(REMOVE) $(TARGET).map
437	$(REMOVE) $(TARGET).obj	431	$(REMOVE) $(TARGET).obj
438	$(REMOVE) $(TARGET).a90	432	$(REMOVE) $(TARGET).a90
439	$(REMOVE) $(TARGET).sym	433	$(REMOVE) $(TARGET).sym
440	$(REMOVE) $(TARGET).lnk	434	$(REMOVE) $(TARGET).lnk
441	$(REMOVE) $(TARGET).lss	435	$(REMOVE) $(TARGET).lss
442	$(REMOVE) $(OBJ)	436	$(REMOVE) $(OBJ)
443	$(REMOVE) $(LST)	437	$(REMOVE) $(LST)
444	$(REMOVE) $(SRC:.c=.s)	438	$(REMOVE) $(SRC:.c=.s)
445	$(REMOVE) $(SRC:.c=.d)	439	$(REMOVE) $(SRC:.c=.d)
446	$(REMOVE) .dep/*	440	$(REMOVE) .dep/*
447		441
448		442
449		443
450	# Include the dependency files.	444	# Include the dependency files.
451	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)	445	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
452		446
453		447
454	# Listing of phony targets.	448	# Listing of phony targets.
455	.PHONY : all begin finish end sizebefore sizeafter gccversion \	449	.PHONY : all begin finish end sizebefore sizeafter gccversion \
456	build elf hex eep lss sym coff extcoff \	450	build elf hex eep lss sym coff extcoff \
457	clean clean_list program programlock programinit	451	clean clean_list program programlock programinit
458		452

Subversion Repositories HomeAutomation

(root)/trunk/EmbeddedSoftware/AVR/CanTestCan/makefile @ 386 – Rev 385 → 386