Subversion Repositories HomeAutomation

Rev

Details | Last modification | View Log | SVN | RSS feed

Rev Author Line No. Line
361 andfri 1
## Node specific configuration file
416 arune 2
# This configuration sets up a NodeEssential, v2 with ID 2. The AVR is using internal clock source, 8MHz
3
# Rename this file to config.inc and then modify the params below
361 andfri 4
 
5
HW_NAME=NodeEssential
368 arune 6
HW_VERSION=2
361 andfri 7
 
416 arune 8
# NODE_ID should be allocated from a database and not specified here (not done yet though)
9
# This number should be unique on your network
423 eqlazer 10
NODE_ID=0x02
416 arune 11
# F_CPU is the clock frequency of your microcontroller, check fuses below for external/internal clock source
12
F_CPU=8000000UL
361 andfri 13
 
373 arune 14
#---MEGA8---
368 arune 15
#MCU=atmega8
16
#HIGHFUSE=0xd4
17
#LOWFUSE=0x24
18
#BOOT_START=0x1e00
19
 
373 arune 20
#---MEGA88---
368 arune 21
MCU=atmega88
22
HIGHFUSE=0xdc
416 arune 23
LOWFUSE=0xe2
368 arune 24
EXTFUSE=0x04
373 arune 25
BOOT_START=0x1E00
361 andfri 26
 
373 arune 27
#---mega168---
28
#MCU=atmega168
29
#HIGHFUSE=0xdc
422 eqlazer 30
#LOWFUSE=0xe2
373 arune 31
#EXTFUSE=0x02
374 arune 32
#BOOT_START=0x3C00
373 arune 33
 
361 andfri 34
# CAN configuration
35
CAN_CONTROLLER=MCP2515
368 arune 36
MCP_CLOCK_FREQ_MHZ=20
422 eqlazer 37
MCP_CAN_BITRATE_KBPS=250
368 arune 38
 
373 arune 39
 
368 arune 40
#Some usual settings of fuses
373 arune 41
#LOWFUSE for mega88	and mega168	
368 arune 42
#0xe7		#CKDIV8=1, external crystal
416 arune 43
#0xe0		#CKDIV8=1, external clock   (used if mcu is clocked from can-controller, F_CPU should be 16MHz or 20MHz)
44
#0xe2		#CKDIV8=1, internal RC      (internal AVR-clock, F_CPU should be 8MHz)
368 arune 45
#LOWFUSE for mega8
46
#0x24		#BODLEVEL = 4.0V, BODEN=enabled, internal 8MHz
373 arune 47
#0x20		#BODLEVEL = 4.0V, BODEN=enabled, external clock