/**
* IR receiver and transmitter driver.
*
* @date 2006-12-10
*
* @author Anders Runeson, Andreas Fritiofson
*
*/
/*-----------------------------------------------------------------------------
* Includes
*---------------------------------------------------------------------------*/
#include <config.h>
#include <drivers/ir/transceiver/irtransceiver.h>
#include <drivers/ir/protocols.h>
#include <avr/io.h>
#include <avr/interrupt.h>
/*-----------------------------------------------------------------------------
* Globals
*---------------------------------------------------------------------------*/
uint16_t *rxbuf, *txbuf;
uint8_t rxlen, txlen;
static uint8_t bufIndex; //selects the pulse width in buffer to send
volatile uint8_t data_received;
volatile uint8_t data_transmitted;
uint8_t detect_edge;
uint8_t store;
/*-----------------------------------------------------------------------------
* Prerequisites
*---------------------------------------------------------------------------*/
#ifndef IR_TX_ACTIVE_LOW
#define IR_TX_ACTIVE_LOW 0
#endif
#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__)
#define TIMSK1 TIMSK
#define TIFR1 TIFR
#define ICIE1 TICIE1
#endif
#define IR_COMPARE_VECTOR TIMER1_COMPB_vect
#define IR_TIMEOUT_VECTOR TIMER1_COMPA_vect
#define IR_CAPTURE_VECTOR TIMER1_CAPT_vect
#define IR_TIMEOUT_REG OCR1A
#define IR_COMPARE_REG OCR1B
#define IR_CAPTURE_REG ICR1
#define IR_COUNT_REG TCNT1
#define IR_MODULATION_REG OCR0A
#define IR_TIMER_INIT() TCCR1A = 0; \
TCCR1B = (1<<ICNC1)|(2<<CS10);
#define IR_MASK_COMPARE() TIMSK1 &= ~(1<<OCIE1B);
#define IR_UNMASK_COMPARE() TIFR1 = (1<<OCF1B); TIMSK1 |= (1<<OCIE1B);
#define IR_MASK_TIMEOUT() TIMSK1 &= ~(1<<OCIE1A);
#define IR_UNMASK_TIMEOUT() TIFR1 = (1<<OCF1A); TIMSK1 |= (1<<OCIE1A);
#define IR_MASK_CAPTURE() TIMSK1 &= ~(1<<ICIE1);
#define IR_UNMASK_CAPTURE() TIFR1 = (1<<ICF1); TIMSK1 |= (1<<ICIE1);
#define IR_CAPTURE_FALLING() TCCR1B &= ~(1<<ICES1); \
TIFR1 = (1<<ICF1);
#define IR_CAPTURE_RISING() TCCR1B |= (1<<ICES1); \
TIFR1 = (1<<ICF1);
#define IR_OUTP_HIGH() TCCR0A |= (1<<COM0A0);
#define IR_OUTP_LOW() TCCR0A &= ~(1<<COM0A0);
/*-----------------------------------------------------------------------------
* Interrupt Handlers
*---------------------------------------------------------------------------*/
ISR(IR_COMPARE_VECTOR)
{
if ((bufIndex&1) == 1) { /* if odd, ir-pause */
IR_OUTP_LOW();
} else {
IR_OUTP_HIGH();
}
//The following three lines is just to allow a start signal to be zero.
/* bufIndex++;
while (txbuf[bufIndex] == 0){
bufIndex++;
}*/
if (bufIndex < txlen)
{
IR_COMPARE_REG += txbuf[bufIndex++];
//IR_COMPARE_REG += *(txbuf + bufIndex++);
}
else
{
IR_MASK_COMPARE();
data_transmitted = 1;
}
}
ISR(IR_TIMEOUT_VECTOR)
{
if (rxlen)
{
/* Disable interrupts until the application has taken action on the
* current data and reenabled reception. */
IR_MASK_CAPTURE();
IR_MASK_TIMEOUT();
/* Notify the application that a pulse train has been received. */
data_received = 1;
}
store = 0;
}
ISR(IR_CAPTURE_VECTOR)
{
static uint16_t prev_time;
uint16_t pulsewidth;
/* Read the measured transition time from the capture register. */
uint16_t time = IR_CAPTURE_REG
;
/* Toggle the edge detection. */
if (detect_edge == 0)
{
IR_CAPTURE_RISING();
detect_edge = 1;
}
else
{
IR_CAPTURE_FALLING();
detect_edge = 0;
}
/* Subtract the current measurement from the previous to get the pulse
* width. */
pulsewidth
= time - prev_time
;
/* Set the timeout. */
IR_TIMEOUT_REG
= time + IR_MAX_PULSE_WIDTH
;
if (store)
{
/* Store the measurement. */
rxbuf[rxlen++] = pulsewidth;
//*(rxbuf+rxlen++) = pulsewidth;
/* Disable future measurements if we've filled the buffer. */
//TODO: Report overflow to application
if (rxlen == MAX_NR_TIMES)
{
IR_MASK_CAPTURE();
}
}
else
{
/* The first edge of the pulse train has been detected. Enable the
* storage of the following pulsewidths. */
store = 1;
/* Enable timeout interrupt for detection of the end of the pulse
* train. */
IR_UNMASK_TIMEOUT();
}
}
/*-----------------------------------------------------------------------------
* Public Functions
*---------------------------------------------------------------------------*/
void IrTransceiver_Init(void)
{
/* Set up receiver */
IR_TIMER_INIT();
IR_TIMEOUT_REG = IR_MAX_PULSE_WIDTH;
IR_R_DDR &= ~(1<<IR_R_BIT);
//DDRC |= (1<<PC5);
/* Set up transmitter */
IR_T_DDR |= (1<<IR_T_BIT);
#if defined(__AVR_ATmega88__) || defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
TCCR0A = (0<<COM0A1)|(0<<COM0A0)|(1<<WGM01)|(0<<WGM00);
TCCR0B = (0<<WGM02)|(1<<CS00)|(0<<CS01)|(0<<CS02);
#endif
#if IR_TX_ACTIVE_LOW==1
/* when pwm is disconnected from port (during low) the port should output 5V */
IR_T_PORT |= (1<<IR_T_BIT);
#else
/* when pwm is disconnected from port (during low) the port should output 0V */
IR_T_PORT &= ~(1<<IR_T_BIT);
#endif
}
void IrTransceiver_Receive_Start(uint16_t *buffer)
{
/* Setup buffer and arm the edge detection. */
rxbuf = buffer;
rxlen = 0;
data_received = 0;
store = 0;
#if (IR_RX_ACTIVE_LOW == 1)
IR_CAPTURE_FALLING();
detect_edge = 0;
#else
IR_CAPTURE_RISING();
detect_edge = 1;
#endif
IR_UNMASK_CAPTURE();
}
uint8_t IrTransceiver_Receive_Poll(uint8_t *len)
{
*len = rxlen;
if (data_received)
{
return IR_OK;
}
else if (rxlen > 0)
{
return IR_NOT_FINISHED;
} else {
return IR_NO_DATA;
}
}
uint8_t IrTransceiver_Transmit_Poll(void) {
if (data_transmitted == 0) {
return IR_NOT_FINISHED;
} else {
return IR_OK;
}
}
uint8_t IrTransceiver_Transmit(uint16_t *buffer, uint8_t length, uint8_t modfreq)
{
data_transmitted = 0;
if (length == 0) return IR_NO_DATA;
txbuf = buffer;
txlen = length;
bufIndex = 1;
IR_MODULATION_REG = modfreq;
IR_COMPARE_REG = IR_COUNT_REG + txbuf[0];
IR_OUTP_HIGH();
IR_UNMASK_COMPARE();
//while (!data_transmitted);
return IR_OK;
}