Subversion Repositories HomeAutomation

## Section act_hwPWM -- Do not edit this line

#Uncomment the line below if you want to use EEPROM with this module, dont forget to also uncomment the line in sources.list
act_hwPWM_USEEEPROM=1

act_hwPWM_ID=<ID>

act_hwPWM_STORE_VALUE_TIMEOUT=<TIMER>
act_hwPWM_STORE_VALUE_TIMEOUT_TIME=10

act_hwPWM_SEND_STATUS_TIMEOUT=<TIMER>
act_hwPWM_SEND_STATUS_INTERVAL_S=5

act_hwPWM_FADE_TIMER=<TIMER>

act_hwPWM_ENABLE_FADE=1

# Examples:
# for channel 1 or 2:
# COM=2, WGM= 5, CS=4
# will give 120Hz PWM, adjust CS to change frequency

# for channel 3 or 4:
# COM=2, WGM= 1, CS=3
# will give 240Hz PWM, adjust CS to change frequency

#Channel 1 and 2 is attached to the 16 bit timer 1
#Channel 3 and 4 is attached to the 8 bit timer 0

#### PWM Channel 1 and 2 ####
# COM-modes:
#   In Fast PWM mode:
#     0 - Disabled
#     1 - Toggle OC1A on compare match, OC1B disabled (if WGM = 14 or 15)
#     2 - Clear output on Compare match, set at bottom (non-inverting)
#     3 - Set output on Compare match, clear at bottom (inverting)
#   In Phase correct mode:
#     0 - Disabled
#     1 - Toggle OC1A on compare match, OC1B disabled (if WGM = 9 or 11)
#     2 - Clear output on compare match when upcounting
#         set when downcounting
#     3 - Set output on compare match when upcounting
#         clear when downcounting
#
# WGM-modes:
#  Mode    "TOP"     "Update Output"  "Name"
#     0 -  0xFFFF      Immediate      Normal
#     1 -  0x00FF         Top         PWM, Phase correct, 8-bit
#     2 -  0x01FF         Top         PWM, Phase correct, 9-bit
#     3 -  0x03FF         Top         PWM, Phase correct, 10-bit
#     4 -  0CR1A       Immediate      CTC
#     5 -  0x00FF        Bottom       PWM, Fast, 8-bit
#     6 -  0x01FF        Bottom       PWM, Fast, 9-bit
#     7 -  0x03FF        Bottom       PWM, Fast, 10-bit
#     8 -  ICR1          Bottom       PWM, Phase and frequency correct
#     9 -  OCR1A         Bottom       PWM, Phase and frequency correct
#    10 -  ICR1           Top         PWM, Phase correct
#    11 -  OCR1A          Top         PWM, Phase correct
#    12 -  ICR1        Immediate      CTC
#    13 -  Reserved
#    14 -  ICR1          Bottom       PWM, Fast
#    15 -  OCR1A         Bottom       PWM, Fast

#### PWM Channel 1, EXP_B, Timer1, OC1B ####

# Select Compare Output Mode, act_hwPWM_CHx_COM
# Set to 0 to disable this channel
# See datasheet for more information
act_hwPWM_CH1_COM=0

# Select Waveform Generation Mode, act_hwPWM_CHx_WGM
# See table datasheet for information
act_hwPWM_CH1_WGM=1

# Select Clock Prescaler, act_hwPWM_CHx_CS
# 1 divide by 1    2 divide by 8
# 3 divide by 32   4 divide by 64
# 5 divide by 128  6 divide by 256
# 7 divide by 1024
# See datasheet for more information
act_hwPWM_CH1_CS=1

# Set this to 1 to enable LED scaling on PWM output
act_hwPWM_CH1_LED=0

#### PWM Channel 2, EXP_C, Timer1, OC1A ####
act_hwPWM_CH2_COM=0
act_hwPWM_CH2_WGM=1
act_hwPWM_CH2_CS=1
act_hwPWM_CH3_LED=0

#### PWM Channel 3 and 4 ####
# COM-modes:
#   In Fast PWM mode:
#     0 - Disabled
#     1 - Toggle output on compare match (if WGM >= 4)
#     2 - Clear output on Compare match, set at bottom (non-inverting)
#     3 - Set output on Compare match, clear at bottom (inverting)
#   In Phase correct mode:
#     0 - Disabled
#     1 - Toggle output on compare match (if WGM >= 4)
#     2 - Clear output on compare match when upcounting
#         set when downcounting
#     3 - Set output on compare match when upcounting
#         clear when downcounting
#
# WGM-modes:
#  Mode    "TOP"   "Update Output"  "Name"
#     0 -  0xFF      Immediate      Normal
#     1 -  0xFF         Top         PWM, Phase correct
#     2 -  0CRA      Immediate      CTC
#     3 -  0xFF        Bottom       PWM, Fast
#     4 -  Reserved
#     5 -  OCRA         Top         PWM, Phase correct
#     6 -  Reserved
#     7 -  OCRA        Bottom       PWM, Fast

#### PWM Channel 3, EXP_F, Timer0, OC0A ####
act_hwPWM_CH3_COM=0
act_hwPWM_CH3_WGM=1
act_hwPWM_CH3_CS=1
act_hwPWM_CH3_LED=0

#### PWM Channel 4, EXP_G, Timer0, OC0B ####
act_hwPWM_CH4_COM=0
act_hwPWM_CH4_WGM=1
act_hwPWM_CH4_CS=1
act_hwPWM_CH4_LED=0

## End section act_hwPWM -- Do not edit this line