Subversion Repositories HomeAutomation

Rev

Rev 989 | Rev 1106 | Go to most recent revision | Only display areas with differences | Regard whitespace | Details | Blame | Last modification | View Log | SVN | RSS feed

Rev 989 Rev 1062
1 
 
 1 
 
2 
#include "<template>.h"
 2 
#include "<template>.h"
- 
 
 3 
 
- 
 
 4 
#ifdef <template>_USEEEPROM
- 
 
 5 
struct eeprom_<template> EEMEM eeprom_<template> =
- 
 
 6 
{
- 
 
 7 
    {
- 
 
 8 
        ///TODO: Define initialization values on the EEPROM variables here, this will generate a *.eep file that can be used to store this values to the node, can in future be done with a EEPROM module and the make-scrips. Write the values in the exact same order as the struct is defined in the *.h file.
- 
 
 9 
        0xAB,   // x
- 
 
 10 
        0x1234  // y
- 
 
 11 
    },
- 
 
 12 
    0   // crc, must be a correct value, but this will also be handled by the EEPROM module or make scripts
- 
 
 13 
};
- 
 
 14 
#endif
3 
 
 15 
 
4 
void <template>_Init(void)
 16 
void <template>_Init(void)
5 
{
 17 
{
- 
 
 18 
#ifdef <template>_USEEEPROM
- 
 
 19 
    if (EEDATA_OK)
- 
 
 20 
    {
- 
 
 21 
      ///TODO: Use stored data to set initial values for the module
- 
 
 22 
      blablaX = eeprom_read_byte(EEDATA.x);
- 
 
 23 
      blablaY = eeprom_read_word(EEDATA.y);
- 
 
 24 
    } else
- 
 
 25 
    {   //The CRC of the EEPROM is not correct, store default values and update CRC
- 
 
 26 
      eeprom_write_byte_crc(EEDATA.x, 0xAB, WITHOUT_CRC);
- 
 
 27 
      eeprom_write_word_crc(EEDATA.y, 0x1234, WITHOUT_CRC);
- 
 
 28 
      EEDATA_UPDATE_CRC;
- 
 
 29 
    }
- 
 
 30 
#endif  
6 
    ///TODO: Initialize hardware etc here
 31 
    ///TODO: Initialize hardware etc here
- 
 
 32 
 
7 
}
 33 
}
8 
 
 34 
 
9 
void <template>_Process(void)
 35 
void <template>_Process(void)
10 
{
 36 
{
11 
    ///TODO: Stuff that needs doing is done here
 37 
    ///TODO: Stuff that needs doing is done here
12 
}
 38 
}
13 
 
 39 
 
14 
void <template>_HandleMessage(StdCan_Msg_t *rxMsg)
 40 
void <template>_HandleMessage(StdCan_Msg_t *rxMsg)
15 
{
 41 
{
16 
    if (    StdCan_Ret_class(rxMsg->Header) == CAN_MODULE_CLASS_xyz && ///TODO: Change this to the actual class type
 42 
    if (    StdCan_Ret_class(rxMsg->Header) == CAN_MODULE_CLASS_xyz && ///TODO: Change this to the actual class type
17 
        StdCan_Ret_direction(rxMsg->Header) == DIRECTIONFLAG_FROM_OWNER &&
 43 
        StdCan_Ret_direction(rxMsg->Header) == DIRECTIONFLAG_FROM_OWNER &&
18 
        rxMsg->Header.ModuleType == CAN_MODULE_TYPE_xyz && ///TODO: Change this to the actual module type
 44 
        rxMsg->Header.ModuleType == CAN_MODULE_TYPE_xyz && ///TODO: Change this to the actual module type
19 
        rxMsg->Header.ModuleId == <template>_ID)
 45 
        rxMsg->Header.ModuleId == <template>_ID)
20 
    {
 46 
    {
21 
        switch (rxMsg->Header.Command)
 47 
        switch (rxMsg->Header.Command)
22 
        {
 48 
        {
23 
        case CAN_CMD_MODULE_DUMMY:
 49 
        case CAN_CMD_MODULE_DUMMY:
24 
        ///TODO: Do something dummy
 50 
        ///TODO: Do something dummy
25 
        break;
 51 
        break;
26 
        }
 52 
        }
27 
    }
 53 
    }
28 
}
 54 
}
29 
 
 55 
 
30 
void <template>_List(uint8_t ModuleSequenceNumber)
 56 
void <template>_List(uint8_t ModuleSequenceNumber)
31 
{
 57 
{
32 
    StdCan_Msg_t txMsg;
 58 
    StdCan_Msg_t txMsg;
33 
   
 59 
   
34 
    StdCan_Set_class(txMsg.Header, CAN_MODULE_CLASS_xyz); ///TODO: Change this to the actual class type
 60 
    StdCan_Set_class(txMsg.Header, CAN_MODULE_CLASS_xyz); ///TODO: Change this to the actual class type
35 
    StdCan_Set_direction(txMsg.Header, DIRECTIONFLAG_FROM_OWNER);
 61 
    StdCan_Set_direction(txMsg.Header, DIRECTIONFLAG_FROM_OWNER);
36 
    txMsg.Header.ModuleType = CAN_MODULE_TYPE_xyz; ///TODO: Change this to the actual module type
 62 
    txMsg.Header.ModuleType = CAN_MODULE_TYPE_xyz; ///TODO: Change this to the actual module type
37 
    txMsg.Header.ModuleId = <template>_ID;
 63 
    txMsg.Header.ModuleId = <template>_ID;
38 
    txMsg.Header.Command = CAN_MODULE_CMD_GLOBAL_LIST;
 64 
    txMsg.Header.Command = CAN_MODULE_CMD_GLOBAL_LIST;
39 
    txMsg.Length = 6;
 65 
    txMsg.Length = 6;
40 
 
 66 
 
41 
    txMsg.Data[0] = NODE_HW_ID_BYTE0;
 67 
    txMsg.Data[0] = NODE_HW_ID_BYTE0;
42 
    txMsg.Data[1] = NODE_HW_ID_BYTE1;
 68 
    txMsg.Data[1] = NODE_HW_ID_BYTE1;
43 
    txMsg.Data[2] = NODE_HW_ID_BYTE2;
 69 
    txMsg.Data[2] = NODE_HW_ID_BYTE2;
44 
    txMsg.Data[3] = NODE_HW_ID_BYTE3;
 70 
    txMsg.Data[3] = NODE_HW_ID_BYTE3;
45 
   
 71 
   
46 
    txMsg.Data[4] = NUMBER_OF_MODULES;
 72 
    txMsg.Data[4] = NUMBER_OF_MODULES;
47 
    txMsg.Data[5] = ModuleSequenceNumber;
 73 
    txMsg.Data[5] = ModuleSequenceNumber;
48 
   
 74 
   
49 
    while (StdCan_Put(&txMsg) != StdCan_Ret_OK);
 75 
    while (StdCan_Put(&txMsg) != StdCan_Ret_OK);
50 
}
 76 
}
51 
 
 77