Subversion Repositories HomeAutomation

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | SVN | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
2011 5287 d 3 h arune /trunk/EmbeddedSoftware/AVR/module/sns_DHT11/ Changed periodicity for temperature and humidity, now sends 10s/number of sensors  
2010 5287 d 3 h arune /trunk/EmbeddedSoftware/AVR/module/sns_DHT11/ Fixed sensorid for humidity  
2009 5287 d 3 h arune /trunk/EmbeddedSoftware/AVR/module/sns_DHT11/ Added support for 6 channels
Fixed sending correct sensor id
 
2007 5287 d 4 h arune /trunk/EmbeddedSoftware/AVR/module/sns_DHT11/ sns_DHT11 now supports two sensors  
1996 5292 d 5 h arune /trunk/ Changed commands used of rfTransceive to the old physical command instead of new specific  
1995 5292 d 9 h arune /trunk/EmbeddedSoftware/AVR/module/sns_power/ Added config option for pullup on sns_power  
1988 5294 d 6 h arune /trunk/EmbeddedSoftware/AVR/module/sns_power/ Added debugled for sns_power, also minor cleanup  
1985 5296 d 4 h linlun /trunk/EmbeddedSoftware/AVR/module/template/ Added libraries.list to module template  
1984 5296 d 4 h linlun /trunk/EmbeddedSoftware/AVR/ Added templates for libraries.list and updated makefile, also updates to sns_qtouch  
1980 5297 d 5 h linlun /trunk/EmbeddedSoftware/AVR/module/sns_qtouch/lib/ added the lib  
1979 5297 d 9 h linlun /trunk/EmbeddedSoftware/AVR/module/sns_qtouch/ Added first draft of Qtouch module  
1978 5300 d 6 h arune /trunk/EmbeddedSoftware/AVR/module/ Updated all modules EEPROM config flag  
1977 5301 d 4 h arune /trunk/EmbeddedSoftware/AVR/module/ Updated defines for EEPROM in a few more modules, more to come  
1976 5301 d 4 h arune /trunk/EmbeddedSoftware/AVR/module/ Updated defines for EEPROM in template and act_dimmer230, for testing building before updating all modules  
1975 5301 d 6 h arune /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ Fixes for disable TX (pronto was not using the flags)
Made it possible to remove all non used ports
 
1972 5307 d 4 h arune /trunk/EmbeddedSoftware/AVR/ Fixed changed definition of modulation frequency in old ir transmitter (new definition was introduced in new ir transceiver)
Fixed burst mode in old ir transmitter, so that minimum number of repeats is sent even for burst
 
1957 5326 d 3 h cougar /trunk/EmbeddedSoftware/AVR/module/sns_ds18x20/ Keep onewire bus high during temperature conversion to supply power
for DS18S20 sensors that operate in "parasite power" mode. This is also
fine for sensors which are powered by an external supply on the Vdd pin.
 
1955 5326 d 15 h kribba /trunk/EmbeddedSoftware/AVR/module/sns_DHT11/ Removed collision with ds18x20 function ConvertTemperature_callback with identical name.
Removed incompatible pointer type warning
 
1944 5333 d 10 h myhrman /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ fix  
1941 5333 d 10 h myhrman /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ Added specific pronto response codes when channel is busy, or when modfreq is locked to another value by other channel.

Fixed some potential state check problems when trying to transmit on channels not configured as TX.

Improved pronto channel allocation checks in the stateful pronto commands that don't include any channel info.

Refactoring and other minor fixes.
 
1938 5338 d 11 h myhrman /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ When attempting to transmit pronto with zero-length once sequence, immediately start transmitting repeat sequence instead of just aborting.  
1937 5339 d 3 h myhrman /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ Make sure pronto once seq length is non-zero before attempting entering pronto transmit state.  
1931 5351 d 5 h arune /trunk/ Added protocol Viking to configuration, no implementation done
Added support for burst protocols in rfTransceiver module
Should not break anything
 
1927 5379 d 5 h arune /trunk/ Implemented transmit in rfTransceiver, tested works
Added Atom1 script for rfTransceiver
 
1923 5384 d 4 h arune /trunk/EmbeddedSoftware/AVR/module/sns_rfTransceive/ Minor fix for config of rx/tx  
1922 5384 d 4 h arune /trunk/ Added sns_rfTransceive, light version of IR-Transceive and aimed for RF rx tx. Only RX implemented.
Configuration updated with fixes to sns_rfTransceive
IR/RF-protocols fix for nexa timeout
 
1910 5395 d 5 h arune /trunk/EmbeddedSoftware/AVR/module/ Changed all modules to use BIOS GetHwId function directly instead of macro  
1901 5409 d 4 h linlun /trunk/EmbeddedSoftware/AVR/module/sns_SimpleDTMF/ Now the simpleDTMF sends the character 'C' in the end of a number if it is uneven  
1897 5410 d 13 h runge /trunk/ Changed name of hwPWM id to channel to be the same as the input and the dimmer  
1894 5413 d 4 h arune /trunk/EmbeddedSoftware/AVR/ Changed delay routine from ds18s20 to avr-libc  
1893 5413 d 4 h arune /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ Always enable tx pins, even if tx is not used  
1875 5430 d 4 h arune /trunk/EmbeddedSoftware/AVR/ Updated irtransceiver with support for nexa2, minor fixes after testing  
1871 5431 d 6 h arune /trunk/EmbeddedSoftware/AVR/ Minor changes in ir driver and module to support Nexa, Nexa not working yet  
1870 5431 d 8 h linlun /trunk/ Added DHT11 temperature and humidity sensor support  
1865 5440 d 7 h myhrman /trunk/EmbeddedSoftware/AVR/ Support for setting modulation frequency in transmission. Only possible to transmit simultaneously when using the same freq.  
1864 5440 d 9 h myhrman /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ Now using start parameter in IrTransceiver_Transmit() instead of passing a different pointer when transmitting repeat sequences.  
1861 5440 d 10 h myhrman /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ pronto_sendResponse() function only existed when pronto support was enabled. Fixed  
1858 5440 d 11 h myhrman /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ Stop flag wasn't cleared before starting a new pronto transmission. Fixed

STOPPED response wasn't sent when receiving a STOP command while already in stopped mode. Fixed (but ALREADY STOPPED response is sent instead).
 
1856 5440 d 11 h myhrman /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ Now using #defines from moduleid.h for the Pronto Response commands (instead of the locally defined enum).

The Pronto STOPPED response is now sent when IR transmission is actually completed, regardsless of whether it was explicitely or implicitely stopped. This response is now also sent when non-pronto transmissions are completed.
 
1854 5441 d 14 h myhrman /trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ Added CAN response messages to all pronto IR operations. Better error checks, and some refactoring.