| Rev |
Age |
Author |
Path |
Log message |
Diff |
| 2012 |
5264 d 8 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/act_hwPWM/ |
Minor fix |
|
| 2011 |
5264 d 23 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/sns_DHT11/ |
Changed periodicity for temperature and humidity, now sends 10s/number of sensors |
|
| 2010 |
5264 d 23 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/sns_DHT11/ |
Fixed sensorid for humidity |
|
| 2009 |
5264 d 23 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/sns_DHT11/ |
Added support for 6 channels
Fixed sending correct sensor id |
|
| 2007 |
5265 d 0 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/sns_DHT11/ |
sns_DHT11 now supports two sensors |
|
| 1996 |
5270 d 1 h |
arune |
/trunk/ |
Changed commands used of rfTransceive to the old physical command instead of new specific |
|
| 1995 |
5270 d 4 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/sns_power/ |
Added config option for pullup on sns_power |
|
| 1988 |
5272 d 2 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/sns_power/ |
Added debugled for sns_power, also minor cleanup |
|
| 1985 |
5274 d 0 h |
linlun |
/trunk/EmbeddedSoftware/AVR/module/template/ |
Added libraries.list to module template |
|
| 1984 |
5274 d 0 h |
linlun |
/trunk/EmbeddedSoftware/AVR/ |
Added templates for libraries.list and updated makefile, also updates to sns_qtouch |
|
| 1980 |
5275 d 0 h |
linlun |
/trunk/EmbeddedSoftware/AVR/module/sns_qtouch/lib/ |
added the lib |
|
| 1979 |
5275 d 4 h |
linlun |
/trunk/EmbeddedSoftware/AVR/module/sns_qtouch/ |
Added first draft of Qtouch module |
|
| 1978 |
5278 d 2 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/ |
Updated all modules EEPROM config flag |
|
| 1977 |
5279 d 0 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/ |
Updated defines for EEPROM in a few more modules, more to come |
|
| 1976 |
5279 d 0 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/ |
Updated defines for EEPROM in template and act_dimmer230, for testing building before updating all modules |
|
| 1975 |
5279 d 2 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ |
Fixes for disable TX (pronto was not using the flags)
Made it possible to remove all non used ports |
|
| 1972 |
5285 d 0 h |
arune |
/trunk/EmbeddedSoftware/AVR/ |
Fixed changed definition of modulation frequency in old ir transmitter (new definition was introduced in new ir transceiver)
Fixed burst mode in old ir transmitter, so that minimum number of repeats is sent even for burst |
|
| 1957 |
5303 d 23 h |
cougar |
/trunk/EmbeddedSoftware/AVR/module/sns_ds18x20/ |
Keep onewire bus high during temperature conversion to supply power
for DS18S20 sensors that operate in "parasite power" mode. This is also
fine for sensors which are powered by an external supply on the Vdd pin. |
|
| 1955 |
5304 d 10 h |
kribba |
/trunk/EmbeddedSoftware/AVR/module/sns_DHT11/ |
Removed collision with ds18x20 function ConvertTemperature_callback with identical name.
Removed incompatible pointer type warning |
|
| 1944 |
5311 d 5 h |
myhrman |
/trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ |
fix |
|
| 1941 |
5311 d 6 h |
myhrman |
/trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ |
Added specific pronto response codes when channel is busy, or when modfreq is locked to another value by other channel.
Fixed some potential state check problems when trying to transmit on channels not configured as TX.
Improved pronto channel allocation checks in the stateful pronto commands that don't include any channel info.
Refactoring and other minor fixes. |
|
| 1938 |
5316 d 7 h |
myhrman |
/trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ |
When attempting to transmit pronto with zero-length once sequence, immediately start transmitting repeat sequence instead of just aborting. |
|
| 1937 |
5316 d 23 h |
myhrman |
/trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ |
Make sure pronto once seq length is non-zero before attempting entering pronto transmit state. |
|
| 1931 |
5329 d 1 h |
arune |
/trunk/ |
Added protocol Viking to configuration, no implementation done
Added support for burst protocols in rfTransceiver module
Should not break anything |
|
| 1927 |
5357 d 0 h |
arune |
/trunk/ |
Implemented transmit in rfTransceiver, tested works
Added Atom1 script for rfTransceiver |
|
| 1923 |
5362 d 0 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/sns_rfTransceive/ |
Minor fix for config of rx/tx |
|
| 1922 |
5362 d 0 h |
arune |
/trunk/ |
Added sns_rfTransceive, light version of IR-Transceive and aimed for RF rx tx. Only RX implemented.
Configuration updated with fixes to sns_rfTransceive
IR/RF-protocols fix for nexa timeout |
|
| 1910 |
5373 d 1 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/ |
Changed all modules to use BIOS GetHwId function directly instead of macro |
|
| 1901 |
5387 d 0 h |
linlun |
/trunk/EmbeddedSoftware/AVR/module/sns_SimpleDTMF/ |
Now the simpleDTMF sends the character 'C' in the end of a number if it is uneven |
|
| 1897 |
5388 d 9 h |
runge |
/trunk/ |
Changed name of hwPWM id to channel to be the same as the input and the dimmer |
|
| 1894 |
5391 d 0 h |
arune |
/trunk/EmbeddedSoftware/AVR/ |
Changed delay routine from ds18s20 to avr-libc |
|
| 1893 |
5391 d 0 h |
arune |
/trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ |
Always enable tx pins, even if tx is not used |
|
| 1875 |
5408 d 0 h |
arune |
/trunk/EmbeddedSoftware/AVR/ |
Updated irtransceiver with support for nexa2, minor fixes after testing |
|
| 1871 |
5409 d 2 h |
arune |
/trunk/EmbeddedSoftware/AVR/ |
Minor changes in ir driver and module to support Nexa, Nexa not working yet |
|
| 1870 |
5409 d 4 h |
linlun |
/trunk/ |
Added DHT11 temperature and humidity sensor support |
|
| 1865 |
5418 d 3 h |
myhrman |
/trunk/EmbeddedSoftware/AVR/ |
Support for setting modulation frequency in transmission. Only possible to transmit simultaneously when using the same freq. |
|
| 1864 |
5418 d 5 h |
myhrman |
/trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ |
Now using start parameter in IrTransceiver_Transmit() instead of passing a different pointer when transmitting repeat sequences. |
|
| 1861 |
5418 d 6 h |
myhrman |
/trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ |
pronto_sendResponse() function only existed when pronto support was enabled. Fixed |
|
| 1858 |
5418 d 7 h |
myhrman |
/trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ |
Stop flag wasn't cleared before starting a new pronto transmission. Fixed
STOPPED response wasn't sent when receiving a STOP command while already in stopped mode. Fixed (but ALREADY STOPPED response is sent instead). |
|
| 1856 |
5418 d 7 h |
myhrman |
/trunk/EmbeddedSoftware/AVR/module/sns_irTransceive/ |
Now using #defines from moduleid.h for the Pronto Response commands (instead of the locally defined enum).
The Pronto STOPPED response is now sent when IR transmission is actually completed, regardsless of whether it was explicitely or implicitely stopped. This response is now also sent when non-pronto transmissions are completed. |
|