Subversion Repositories HomeAutomation

Rev

Rev 628 | Only display areas with differences | Regard whitespace | Details | Blame | Last modification | View Log | SVN | RSS feed

Rev 628 Rev 656
1 
## Node specific configuration file for bios
 1 
## Node specific configuration file for bios
2 
 
 2 
 
3 
HW_NAME=NodeEssential
 3 
HW_NAME=NodeEssential
4 
HW_VERSION=2
 4 
HW_VERSION=2
5 
 
 5 
 
6 
# Uncomment to make node autostart after X time-msgs has been sent to node
 6 
# Uncomment to make node autostart after X time-msgs has been sent to node
7 
# Do not choose 0 as X, also 1 is a bad choice
 7 
# Do not choose 0 as X, also 1 is a bad choice
8 
# This should not be used on nodes with application under developement
 8 
# This should not be used on nodes with application under developement
9 
#AUTOSTART=5
 9 
#AUTOSTART=5
10 
 
 10 
 
11 
# This number should be unique on your network
 11 
# This number should be unique on your network
12 
NODE_ID=0x02
 12 
NODE_ID=0x02UL
13 
# F_CPU is the clock frequency of your microcontroller, check fuses below for external/internal clock source
 13 
# F_CPU is the clock frequency of your microcontroller, check fuses below for external/internal clock source
14 
F_CPU=8000000UL
 14 
F_CPU=8000000UL
15 
 
 15 
 
16 
#---MEGA8---
 16 
#---MEGA8---
17 
#MCU=atmega8
 17 
#MCU=atmega8
18 
#HIGHFUSE=0xd4
 18 
#HIGHFUSE=0xd4
19 
#LOWFUSE=0x24
 19 
#LOWFUSE=0x24
20 
#BOOT_START=0x1e00
 20 
#BOOT_START=0x1e00
21 
 
 21 
 
22 
#---MEGA88---
 22 
#---MEGA88---
23 
#MCU=atmega88
 23 
#MCU=atmega88
24 
#HIGHFUSE=0xdc
 24 
#HIGHFUSE=0xdc
25 
#LOWFUSE=0xe2
 25 
#LOWFUSE=0xe2
26 
#EXTFUSE=0x04
 26 
#EXTFUSE=0x04
27 
#BOOT_START=0x1e00
 27 
#BOOT_START=0x1e00
28 
 
 28 
 
29 
#---MEGA168---
 29 
#---MEGA168---
30 
#MCU=atmega168
 30 
#MCU=atmega168
31 
#HIGHFUSE=0xdc
 31 
#HIGHFUSE=0xdc
32 
#LOWFUSE=0xe2
 32 
#LOWFUSE=0xe2
33 
#EXTFUSE=0x02
 33 
#EXTFUSE=0x02
34 
#BOOT_START=0x3c00
 34 
#BOOT_START=0x3c00
35 
 
 35 
 
36 
# CAN configuration
 36 
# CAN configuration
37 
CAN_CONTROLLER=MCP2515
 37 
CAN_CONTROLLER=MCP2515
38 
MCP_CS_PORT=PORTB
 38 
MCP_CS_PORT=PORTB
39 
MCP_CS_DDR=DDRB
 39 
MCP_CS_DDR=DDRB
40 
MCP_CS_BIT=PB2
 40 
MCP_CS_BIT=PB2
41 
MCP_CAN_BITRATE_KBPS=250
 41 
MCP_CAN_BITRATE_KBPS=250
42 
MCP_CLOCK_FREQ_MHZ=20
 42 
MCP_CLOCK_FREQ_MHZ=20
43 
MCP_CLOCK_PRESC=1
 43 
MCP_CLOCK_PRESC=1
44 
 
 44 
 
45 
# For 				MCP_CLOCK_FREQ_MHZ=20	MCP_CLOCK_FREQ_MHZ=16
 45 
# For 				MCP_CLOCK_FREQ_MHZ=20	MCP_CLOCK_FREQ_MHZ=16
46 
# MCP_CLOCK_PRESC		external clock			external clock
 46 
# MCP_CLOCK_PRESC		external clock			external clock
47 
# 		1 					20MHz					16MHz
47 
# 		1 					20MHz					16MHz
48 
# 		2					10MHz					8MHz
 48 
# 		2					10MHz					8MHz
49 
# 		4					5MHz					4MHz
 49 
# 		4					5MHz					4MHz
50 
# 		8					2.5MHz					2MHz
 50 
# 		8					2.5MHz					2MHz
51 
# Make sure to change F_CPU accordingly if using external clock on AVR (LOWFUSE)
 51 
# Make sure to change F_CPU accordingly if using external clock on AVR (LOWFUSE)
52 
 
 52 
 
53 
 
 53 
 
54 
#Some common settings of fuses
 54 
#Some common settings of fuses
55 
#LOWFUSE for mega88 and mega168
55 
#LOWFUSE for mega88 and mega168
56 
#0xe7		#CKDIV8=1, external crystal
 56 
#0xe7		#CKDIV8=1, external crystal
57 
#0xe0		#CKDIV8=1, external clock   (used if mcu is clocked from can-controller, F_CPU should be 16MHz or 20MHz)
 57 
#0xe0		#CKDIV8=1, external clock   (used if mcu is clocked from can-controller, F_CPU should be 16MHz or 20MHz)
58 
#0xe2		#CKDIV8=1, internal RC      (internal AVR-clock, F_CPU should be 8MHz)
 58 
#0xe2		#CKDIV8=1, internal RC      (internal AVR-clock, F_CPU should be 8MHz)
59 
#LOWFUSE for mega8
 59 
#LOWFUSE for mega8
60 
#0x24		#BODLEVEL = 4.0V, BODEN=enabled, internal 8MHz
 60 
#0x24		#BODLEVEL = 4.0V, BODEN=enabled, internal 8MHz
61 
#0x20		#BODLEVEL = 4.0V, BODEN=enabled, external clock
 61 
#0x20		#BODLEVEL = 4.0V, BODEN=enabled, external clock