WebSVN – HomeAutomation – Diff – /trunk/EmbeddedSoftware/AVR/standalone/Can2Serial/makefile


# Hey Emacs, this is a -*- makefile -*-
#
# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.
# Released to the Public Domain
# Please read the make user manual!
#
# Additional material for this makefile was submitted by:
#  Tim Henigan
#  Peter Fleury
#  Reiner Patommel
#  Sander Pool
#  Frederik Rouleau
#  Markus Pfaff
#
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
#
# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
#                4.07 or greater).
#
# make program = Download the hex file to the device, using avrdude.  Please
#                customize the avrdude settings below first!
#
# make filename.s = Just compile filename.c into the assembler code only
#
# To rebuild project do "make clean" then "make all".
#
 
########
# Differences from WinAVR 20040720 sample:
# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
# - F_OSC Define in CFLAGS and AFLAGS
 
 
# MCU name
#MCU = atmega32
#MCU = atmega8
MCU = atmega88
#MCU = atmega168
 
 
 
 
 
 
 
 
 
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
 
 
# Target file name (without extension).
TARGET = main
 
LIBDIR = ../../avr-lib/
 
 
# List C source files here. (C dependencies are automatically generated.)
SRC =	$(TARGET).c\
		$(LIBDIR)drivers/uart/serial.c\
		$(LIBDIR)drivers/uart/uart.c\
		$(LIBDIR)drivers/timer/timebase.c\
		$(LIBDIR)drivers/mcu/mcu.c\
 
		$(LIBDIR)drivers/can/mcp2515/mcp2515.c
		
# List Assembler source files here.
# Make them always end in a capital .S.  Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = 
 
 
# Optimization level, can be [0, 1, 2, 3, s]. 
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
#OPT = 3
 
# Debugging format.
# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
#DEBUG = stabs
DEBUG = dwarf-2
 
# List any extra directories to look for include files here.
#     Each directory must be seperated by a space.
EXTRAINCDIRS = $(LIBDIR)drivers/uart $(LIBDIR)drivers/timer $(LIBDIR)drivers/mcu $(LIBDIR)drivers/can/mcp2515/ $(LIBDIR) 
 
# Compiler flag to set the C Standard level.
# c89   - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99   - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
 
# Place -D or -U options here
CDEFS =
 
# Place -I options here
CINCS =
 
 
# Compiler flags.
#  -g*:          generate debugging information
#  -O*:          optimization level
#  -f...:        tuning, see GCC manual and avr-libc documentation
#  -Wall...:     warning level
#  -Wa,...:      tell GCC to pass this to the assembler.
#    -adhlns...: create assembler listing
CFLAGS = 
#CFLAGS += -g$(DEBUG)
CFLAGS += $(CDEFS) $(CINCS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wstrict-prototypes
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#CFLAGS += -DF_CPU=$(F_CPU)
 
 
 
# Assembler flags.
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing
#  -gstabs:   have the assembler create line number information; note that
#             for use in COFF files, additional information about filenames
#             and function names needs to be present in the assembler source
#             files -- see avr-libc docs [FIXME: not yet described there]
##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
#ASFLAGS += -DF_OSC=$(F_OSC)
 
 
#Additional libraries.
 
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
PRINTF_LIB = 
 
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
SCANF_LIB = 
 
MATH_LIB = -lm
 
# External memory options
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
 
EXTMEMOPTS =
 
# Linker flags.
#  -Wl,...:     tell GCC to pass this to linker.
#    -Map:      create map file
#    --cref:    add cross reference to  map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 
 
 
 
# Programming support using avrdude. Settings and variables.
 
# Programming hardware: alf avr910 avrisp bascom bsd 
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = dragon_isp
 
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb    # programmer connected to serial device
AVRDUDE_BAUD = 115200
 
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 
 
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
 
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
 
# Increase verbosity level.  Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
 
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 
 
 
# ---------------------------------------------------------------------------
 
# Define directories, if needed.
DIRAVR = c:/progra~1/winavr
DIRAVRBIN = $(DIRAVR)/bin
DIRAVRUTILS = $(DIRAVR)/utils/bin
DIRINC = .
DIRLIB = $(DIRAVR)/avr/lib
 
 
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
COPY = cp
 
 
 
 
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = --------  end  --------
MSG_SIZE_BEFORE = Size before: 
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
 
 
 
 
# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
 
# Define all listing files.
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
 
 
# Compiler flags to generate dependency files.
### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
 
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 
 
 
# Default target.
all: begin gccversion sizebefore build sizeafter finished end
 
build: elf hex eep lss sym
 
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss 
sym: $(TARGET).sym
 
 
 
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
	@echo
	@echo $(MSG_BEGIN)
 
finished:
	@echo $(MSG_ERRORS_NONE)
 
end:
	@echo $(MSG_END)
	@echo
 
 
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf
sizebefore:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
 
sizeafter:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
 
 
 
# Display compiler version information.
gccversion : 
	@$(CC) --version
 
 
 
# Program the device.  
program: $(TARGET).hex $(TARGET).eep
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
#programlock: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
 
#programinit: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
 
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .data-0x800000 \
--change-section-address .bss-0x800000 \
--change-section-address .noinit-0x800000 \
--change-section-address .eeprom-0x810000 
 
 
coff: $(TARGET).elf
	@echo
	@echo $(MSG_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 
 
extcoff: $(TARGET).elf
	@echo
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 
 
 
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
	@echo
	@echo $(MSG_FLASH) $@
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 
%.eep: %.elf
	@echo
	@echo $(MSG_EEPROM) $@
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
# Create extended listing file from ELF output file.
%.lss: %.elf
	@echo
	@echo $(MSG_EXTENDED_LISTING) $@
	$(OBJDUMP) -h -S $< > $@
 
# Create a symbol table from ELF output file.
%.sym: %.elf
	@echo
	@echo $(MSG_SYMBOL_TABLE) $@
	$(NM) -n $< > $@
 
 
 
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
	@echo
	@echo $(MSG_LINKING) $@
	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
 
 
# Compile: create object files from C source files.
%.o : %.c
	@echo
	@echo $(MSG_COMPILING) $<
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
 
 
# Compile: create assembler files from C source files.
%.s : %.c
	$(CC) -S $(ALL_CFLAGS) $< -o $@
 
 
# Assemble: create object files from assembler source files.
%.o : %.S
	@echo
	@echo $(MSG_ASSEMBLING) $<
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
 
 
 
# Target: clean project.
clean: begin clean_list finished end
 
clean_list :
	@echo
	@echo $(MSG_CLEANING)
	$(REMOVE) $(TARGET).hex
	$(REMOVE) $(TARGET).eep
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).cof
	$(REMOVE) $(TARGET).elf
	$(REMOVE) $(TARGET).map
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).a90
	$(REMOVE) $(TARGET).sym
	$(REMOVE) $(TARGET).lnk
	$(REMOVE) $(TARGET).lss
	$(REMOVE) $(OBJ)
	$(REMOVE) $(LST)
	$(REMOVE) $(SRC:.c=.s)
	$(REMOVE) $(SRC:.c=.d)
	$(REMOVE) .dep/*
 
 
 
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 
 
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list program programlock programinit
 

Rev 658	Rev 665
1	# Hey Emacs, this is a -- makefile --	1	# Hey Emacs, this is a -- makefile --
2	#	2	#
3	# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.	3	# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.
4	# Released to the Public Domain	4	# Released to the Public Domain
5	# Please read the make user manual!	5	# Please read the make user manual!
6	#	6	#
7	# Additional material for this makefile was submitted by:	7	# Additional material for this makefile was submitted by:
8	# Tim Henigan	8	# Tim Henigan
9	# Peter Fleury	9	# Peter Fleury
10	# Reiner Patommel	10	# Reiner Patommel
11	# Sander Pool	11	# Sander Pool
12	# Frederik Rouleau	12	# Frederik Rouleau
13	# Markus Pfaff	13	# Markus Pfaff
14	#	14	#
15	# On command line:	15	# On command line:
16	#	16	#
17	# make all = Make software.	17	# make all = Make software.
18	#	18	#
19	# make clean = Clean out built project files.	19	# make clean = Clean out built project files.
20	#	20	#
21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).	21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
22	#	22	#
23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio	23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
24	# 4.07 or greater).	24	# 4.07 or greater).
25	#	25	#
26	# make program = Download the hex file to the device, using avrdude. Please	26	# make program = Download the hex file to the device, using avrdude. Please
27	# customize the avrdude settings below first!	27	# customize the avrdude settings below first!
28	#	28	#
29	# make filename.s = Just compile filename.c into the assembler code only	29	# make filename.s = Just compile filename.c into the assembler code only
30	#	30	#
31	# To rebuild project do "make clean" then "make all".	31	# To rebuild project do "make clean" then "make all".
32	#	32	#
33		33
34	########	34	########
35	# Differences from WinAVR 20040720 sample:	35	# Differences from WinAVR 20040720 sample:
36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)	36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
37	# - F_OSC Define in CFLAGS and AFLAGS	37	# - F_OSC Define in CFLAGS and AFLAGS
38		38
39		39
40	# MCU name	40	# MCU name
41	#MCU = atmega32	41	#MCU = atmega32
42	#MCU = atmega8	42	#MCU = atmega8
43	~~#MCU~~ = atmega88	43	MCU = atmega88
44	~~MCU~~ = atmega168	44	#MCU = atmega168
45		45
46		-
47	# Main Oscillator Frequency	-
48	#F_CPU = 1000000	-
49	#F_CPU = 8000000	-
50	#F_CPU = 9216000	-
51	#F_CPU = 16000000	-
52	F_CPU = 20000000	-
53		46
54	# Output format. (can be srec, ihex, binary)	47	# Output format. (can be srec, ihex, binary)
55	FORMAT = ihex	48	FORMAT = ihex
56		49
57		50
58	# Target file name (without extension).	51	# Target file name (without extension).
59	TARGET = main	52	TARGET = main
60		53
61	LIBDIR = ../../lib~~/src~~/	54	LIBDIR = ../../avr-lib/
62		-
63		55
64	# List C source files here. (C dependencies are automatically generated.)	56	# List C source files here. (C dependencies are automatically generated.)
65	SRC = $(TARGET).c\	57	SRC = $(TARGET).c\
66	$(LIBDIR)~~mcu~~/serial.c\	58	$(LIBDIR)drivers/uart/serial.c\
67	$(LIBDIR)~~mcu~~/uart.c\	59	$(LIBDIR)drivers/uart/uart.c\
68	$(LIBDIR)~~mcu~~/timebase.c\	60	$(LIBDIR)drivers/timer/timebase.c\
69	$(LIBDIR)mcu/mcu.c\	61	$(LIBDIR)drivers/mcu/mcu.c\
70	$(LIBDIR)can/can.c\	-
71	$(LIBDIR)can/mcp2515/mcp2515.c	62	$(LIBDIR)drivers/can/mcp2515/mcp2515.c
72		63
73	# List Assembler source files here.	64	# List Assembler source files here.
74	# Make them always end in a capital .S. Files ending in a lowercase .s	65	# Make them always end in a capital .S. Files ending in a lowercase .s
75	# will not be considered source files but generated files (assembler	66	# will not be considered source files but generated files (assembler
76	# output from the compiler), and will be deleted upon "make clean"!	67	# output from the compiler), and will be deleted upon "make clean"!
77	# Even though the DOS/Win* filesystem matches both .s and .S the same,	68	# Even though the DOS/Win* filesystem matches both .s and .S the same,
78	# it will preserve the spelling of the filenames, and gcc itself does	69	# it will preserve the spelling of the filenames, and gcc itself does
79	# care about how the name is spelled on its command-line.	70	# care about how the name is spelled on its command-line.
80	ASRC =	71	ASRC =
81		72
82		73
83	# Optimization level, can be [0, 1, 2, 3, s].	74	# Optimization level, can be [0, 1, 2, 3, s].
84	# 0 = turn off optimization. s = optimize for size.	75	# 0 = turn off optimization. s = optimize for size.
85	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)	76	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
86	OPT = s	77	OPT = s
87	#OPT = 3	78	#OPT = 3
88		79
89	# Debugging format.	80	# Debugging format.
90	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.	81	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
91	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.	82	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
92	#DEBUG = stabs	83	#DEBUG = stabs
93	DEBUG = dwarf-2	84	DEBUG = dwarf-2
94		85
95	# List any extra directories to look for include files here.	86	# List any extra directories to look for include files here.
96	# Each directory must be seperated by a space.	87	# Each directory must be seperated by a space.
97	EXTRAINCDIRS = $(LIBDIR)/~~can~~ $~~(LIBDIR)/can~~/mcp2515 $(LIBDIR)~~/mcu~~	88	EXTRAINCDIRS = $(LIBDIR)drivers/uart $(LIBDIR)drivers/timer $(LIBDIR)drivers/mcu $(LIBDIR)drivers/can/mcp2515/ $(LIBDIR)
98		89
99	# Compiler flag to set the C Standard level.	90	# Compiler flag to set the C Standard level.
100	# c89 - "ANSI" C	91	# c89 - "ANSI" C
101	# gnu89 - c89 plus GCC extensions	92	# gnu89 - c89 plus GCC extensions
102	# c99 - ISO C99 standard (not yet fully implemented)	93	# c99 - ISO C99 standard (not yet fully implemented)
103	# gnu99 - c99 plus GCC extensions	94	# gnu99 - c99 plus GCC extensions
104	CSTANDARD = -std=gnu99	95	CSTANDARD = -std=gnu99
105		96
106	# Place -D or -U options here	97	# Place -D or -U options here
107	CDEFS =	98	CDEFS =
108		99
109	# Place -I options here	100	# Place -I options here
110	CINCS =	101	CINCS =
111		102
112		103
113	# Compiler flags.	104	# Compiler flags.
114	# -g*: generate debugging information	105	# -g*: generate debugging information
115	# -O*: optimization level	106	# -O*: optimization level
116	# -f...: tuning, see GCC manual and avr-libc documentation	107	# -f...: tuning, see GCC manual and avr-libc documentation
117	# -Wall...: warning level	108	# -Wall...: warning level
118	# -Wa,...: tell GCC to pass this to the assembler.	109	# -Wa,...: tell GCC to pass this to the assembler.
119	# -adhlns...: create assembler listing	110	# -adhlns...: create assembler listing
120	CFLAGS =	111	CFLAGS =
121	#CFLAGS += -g$(DEBUG)	112	#CFLAGS += -g$(DEBUG)
122	CFLAGS += $(CDEFS) $(CINCS)	113	CFLAGS += $(CDEFS) $(CINCS)
123	CFLAGS += -O$(OPT)	114	CFLAGS += -O$(OPT)
124	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums	115	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
125	CFLAGS += -Wall -Wstrict-prototypes	116	CFLAGS += -Wall -Wstrict-prototypes
126	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)	117	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
127	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))	118	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
128	CFLAGS += $(CSTANDARD)	119	CFLAGS += $(CSTANDARD)
129	~~CFLAGS~~ += -DF_CPU=$(F_CPU)	120	#CFLAGS += -DF_CPU=$(F_CPU)
130		121
131		122
132		123
133	# Assembler flags.	124	# Assembler flags.
134	# -Wa,...: tell GCC to pass this to the assembler.	125	# -Wa,...: tell GCC to pass this to the assembler.
135	# -ahlms: create listing	126	# -ahlms: create listing
136	# -gstabs: have the assembler create line number information; note that	127	# -gstabs: have the assembler create line number information; note that
137	# for use in COFF files, additional information about filenames	128	# for use in COFF files, additional information about filenames
138	# and function names needs to be present in the assembler source	129	# and function names needs to be present in the assembler source
139	# files -- see avr-libc docs [FIXME: not yet described there]	130	# files -- see avr-libc docs [FIXME: not yet described there]
140	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs	131	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
141	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)	132	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
142	~~ASFLAGS~~ += -DF_OSC=$(F_OSC)	133	#ASFLAGS += -DF_OSC=$(F_OSC)
143		134
144		135
145	#Additional libraries.	136	#Additional libraries.
146		137
147	# Minimalistic printf version	138	# Minimalistic printf version
148	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min	139	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
149		140
150	# Floating point printf version (requires MATH_LIB = -lm below)	141	# Floating point printf version (requires MATH_LIB = -lm below)
151	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt	142	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
152		143
153	PRINTF_LIB =	144	PRINTF_LIB =
154		145
155	# Minimalistic scanf version	146	# Minimalistic scanf version
156	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min	147	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
157		148
158	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)	149	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
159	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt	150	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
160		151
161	SCANF_LIB =	152	SCANF_LIB =
162		153
163	MATH_LIB = -lm	154	MATH_LIB = -lm
164		155
165	# External memory options	156	# External memory options
166		157
167	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	158	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
168	# used for variables (.data/.bss) and heap (malloc()).	159	# used for variables (.data/.bss) and heap (malloc()).
169	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff	160	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
170		161
171	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	162	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
172	# only used for heap (malloc()).	163	# only used for heap (malloc()).
173	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff	164	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
174		165
175	EXTMEMOPTS =	166	EXTMEMOPTS =
176		167
177	# Linker flags.	168	# Linker flags.
178	# -Wl,...: tell GCC to pass this to linker.	169	# -Wl,...: tell GCC to pass this to linker.
179	# -Map: create map file	170	# -Map: create map file
180	# --cref: add cross reference to map file	171	# --cref: add cross reference to map file
181	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref	172	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
182	LDFLAGS += $(EXTMEMOPTS)	173	LDFLAGS += $(EXTMEMOPTS)
183	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)	174	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
184		175
185		176
186		177
187		178
188	# Programming support using avrdude. Settings and variables.	179	# Programming support using avrdude. Settings and variables.
189		180
190	# Programming hardware: alf avr910 avrisp bascom bsd	181	# Programming hardware: alf avr910 avrisp bascom bsd
191	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500	182	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
192	#	183	#
193	# Type: avrdude -c ?	184	# Type: avrdude -c ?
194	# to get a full listing.	185	# to get a full listing.
195	#	186	#
196	AVRDUDE_PROGRAMMER = ~~avrispv2~~	187	AVRDUDE_PROGRAMMER = dragon_isp
197		188
198	# com1 = serial port. Use lpt1 to connect to parallel port.	189	# com1 = serial port. Use lpt1 to connect to parallel port.
199	AVRDUDE_PORT = ~~/dev/ttyUSB1~~ # programmer connected to serial device	190	AVRDUDE_PORT = usb # programmer connected to serial device
200	AVRDUDE_BAUD = 115200	191	AVRDUDE_BAUD = 115200
201		192
202	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex	193	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
203	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep	194	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
204		195
205		196
206	# Uncomment the following if you want avrdude's erase cycle counter.	197	# Uncomment the following if you want avrdude's erase cycle counter.
207	# Note that this counter needs to be initialized first using -Yn,	198	# Note that this counter needs to be initialized first using -Yn,
208	# see avrdude manual.	199	# see avrdude manual.
209	#AVRDUDE_ERASE_COUNTER = -y	200	#AVRDUDE_ERASE_COUNTER = -y
210		201
211	# Uncomment the following if you do /not/ wish a verification to be	202	# Uncomment the following if you do /not/ wish a verification to be
212	# performed after programming the device.	203	# performed after programming the device.
213	#AVRDUDE_NO_VERIFY = -V	204	#AVRDUDE_NO_VERIFY = -V
214		205
215	# Increase verbosity level. Please use this when submitting bug	206	# Increase verbosity level. Please use this when submitting bug
216	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>	207	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
217	# to submit bug reports.	208	# to submit bug reports.
218	#AVRDUDE_VERBOSE = -v -v	209	#AVRDUDE_VERBOSE = -v -v
219		210
220	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)	211	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
221	AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)	212	AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
222	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)	213	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
223	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)	214	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
224		215
225		216
226		217
227	# ---------------------------------------------------------------------------	218	# ---------------------------------------------------------------------------
228		219
229	# Define directories, if needed.	220	# Define directories, if needed.
230	DIRAVR = c:/progra~1/winavr	221	DIRAVR = c:/progra~1/winavr
231	DIRAVRBIN = $(DIRAVR)/bin	222	DIRAVRBIN = $(DIRAVR)/bin
232	DIRAVRUTILS = $(DIRAVR)/utils/bin	223	DIRAVRUTILS = $(DIRAVR)/utils/bin
233	DIRINC = .	224	DIRINC = .
234	DIRLIB = $(DIRAVR)/avr/lib	225	DIRLIB = $(DIRAVR)/avr/lib
235		226
236		227
237	# Define programs and commands.	228	# Define programs and commands.
238	SHELL = sh	229	SHELL = sh
239	CC = avr-gcc	230	CC = avr-gcc
240	OBJCOPY = avr-objcopy	231	OBJCOPY = avr-objcopy
241	OBJDUMP = avr-objdump	232	OBJDUMP = avr-objdump
242	SIZE = avr-size	233	SIZE = avr-size
243	NM = avr-nm	234	NM = avr-nm
244	AVRDUDE = avrdude	235	AVRDUDE = avrdude
245	REMOVE = rm -f	236	REMOVE = rm -f
246	COPY = cp	237	COPY = cp
247		238
248		239
249		240
250		241
251	# Define Messages	242	# Define Messages
252	# English	243	# English
253	MSG_ERRORS_NONE = Errors: none	244	MSG_ERRORS_NONE = Errors: none
254	MSG_BEGIN = -------- begin --------	245	MSG_BEGIN = -------- begin --------
255	MSG_END = -------- end --------	246	MSG_END = -------- end --------
256	MSG_SIZE_BEFORE = Size before:	247	MSG_SIZE_BEFORE = Size before:
257	MSG_SIZE_AFTER = Size after:	248	MSG_SIZE_AFTER = Size after:
258	MSG_COFF = Converting to AVR COFF:	249	MSG_COFF = Converting to AVR COFF:
259	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:	250	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
260	MSG_FLASH = Creating load file for Flash:	251	MSG_FLASH = Creating load file for Flash:
261	MSG_EEPROM = Creating load file for EEPROM:	252	MSG_EEPROM = Creating load file for EEPROM:
262	MSG_EXTENDED_LISTING = Creating Extended Listing:	253	MSG_EXTENDED_LISTING = Creating Extended Listing:
263	MSG_SYMBOL_TABLE = Creating Symbol Table:	254	MSG_SYMBOL_TABLE = Creating Symbol Table:
264	MSG_LINKING = Linking:	255	MSG_LINKING = Linking:
265	MSG_COMPILING = Compiling:	256	MSG_COMPILING = Compiling:
266	MSG_ASSEMBLING = Assembling:	257	MSG_ASSEMBLING = Assembling:
267	MSG_CLEANING = Cleaning project:	258	MSG_CLEANING = Cleaning project:
268		259
269		260
270		261
271		262
272	# Define all object files.	263	# Define all object files.
273	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)	264	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
274		265
275	# Define all listing files.	266	# Define all listing files.
276	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)	267	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
277		268
278		269
279	# Compiler flags to generate dependency files.	270	# Compiler flags to generate dependency files.
280	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d	271	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
281	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d	272	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
282		273
283	# Combine all necessary flags and optional flags.	274	# Combine all necessary flags and optional flags.
284	# Add target processor to flags.	275	# Add target processor to flags.
285	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)	276	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
286	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)	277	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
287		278
288		279
289		280
290		281
291		282
292	# Default target.	283	# Default target.
293	all: begin gccversion sizebefore build sizeafter finished end	284	all: begin gccversion sizebefore build sizeafter finished end
294		285
295	build: elf hex eep lss sym	286	build: elf hex eep lss sym
296		287
297	elf: $(TARGET).elf	288	elf: $(TARGET).elf
298	hex: $(TARGET).hex	289	hex: $(TARGET).hex
299	eep: $(TARGET).eep	290	eep: $(TARGET).eep
300	lss: $(TARGET).lss	291	lss: $(TARGET).lss
301	sym: $(TARGET).sym	292	sym: $(TARGET).sym
302		293
303		294
304		295
305	# Eye candy.	296	# Eye candy.
306	# AVR Studio 3.x does not check make's exit code but relies on	297	# AVR Studio 3.x does not check make's exit code but relies on
307	# the following magic strings to be generated by the compile job.	298	# the following magic strings to be generated by the compile job.
308	begin:	299	begin:
309	@echo	300	@echo
310	@echo $(MSG_BEGIN)	301	@echo $(MSG_BEGIN)
311		302
312	finished:	303	finished:
313	@echo $(MSG_ERRORS_NONE)	304	@echo $(MSG_ERRORS_NONE)
314		305
315	end:	306	end:
316	@echo $(MSG_END)	307	@echo $(MSG_END)
317	@echo	308	@echo
318		309
319		310
320	# Display size of file.	311	# Display size of file.
321	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex	312	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
322	ELFSIZE = $(SIZE) -A $(TARGET).elf	313	ELFSIZE = $(SIZE) -A $(TARGET).elf
323	sizebefore:	314	sizebefore:
324	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi	315	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
325		316
326	sizeafter:	317	sizeafter:
327	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi	318	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
328		319
329		320
330		321
331	# Display compiler version information.	322	# Display compiler version information.
332	gccversion :	323	gccversion :
333	@$(CC) --version	324	@$(CC) --version
334		325
335		326
336		327
337	# Program the device.	328	# Program the device.
338	program: $(TARGET).hex $(TARGET).eep	329	program: $(TARGET).hex $(TARGET).eep
339	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)	330	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
340		331
341	#programlock:	332	#programlock:
342	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m	333	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
343		334
344	#programinit:	335	#programinit:
345	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m	336	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
346		337
347	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.	338	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
348	COFFCONVERT=$(OBJCOPY) --debugging \	339	COFFCONVERT=$(OBJCOPY) --debugging \
349	--change-section-address .data-0x800000 \	340	--change-section-address .data-0x800000 \
350	--change-section-address .bss-0x800000 \	341	--change-section-address .bss-0x800000 \
351	--change-section-address .noinit-0x800000 \	342	--change-section-address .noinit-0x800000 \
352	--change-section-address .eeprom-0x810000	343	--change-section-address .eeprom-0x810000
353		344
354		345
355	coff: $(TARGET).elf	346	coff: $(TARGET).elf
356	@echo	347	@echo
357	@echo $(MSG_COFF) $(TARGET).cof	348	@echo $(MSG_COFF) $(TARGET).cof
358	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof	349	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
359		350
360		351
361	extcoff: $(TARGET).elf	352	extcoff: $(TARGET).elf
362	@echo	353	@echo
363	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof	354	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
364	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof	355	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
365		356
366		357
367		358
368	# Create final output files (.hex, .eep) from ELF output file.	359	# Create final output files (.hex, .eep) from ELF output file.
369	%.hex: %.elf	360	%.hex: %.elf
370	@echo	361	@echo
371	@echo $(MSG_FLASH) $@	362	@echo $(MSG_FLASH) $@
372	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@	363	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
373		364
374	%.eep: %.elf	365	%.eep: %.elf
375	@echo	366	@echo
376	@echo $(MSG_EEPROM) $@	367	@echo $(MSG_EEPROM) $@
377	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \	368	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
378	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@	369	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
379		370
380	# Create extended listing file from ELF output file.	371	# Create extended listing file from ELF output file.
381	%.lss: %.elf	372	%.lss: %.elf
382	@echo	373	@echo
383	@echo $(MSG_EXTENDED_LISTING) $@	374	@echo $(MSG_EXTENDED_LISTING) $@
384	$(OBJDUMP) -h -S $< > $@	375	$(OBJDUMP) -h -S $< > $@
385		376
386	# Create a symbol table from ELF output file.	377	# Create a symbol table from ELF output file.
387	%.sym: %.elf	378	%.sym: %.elf
388	@echo	379	@echo
389	@echo $(MSG_SYMBOL_TABLE) $@	380	@echo $(MSG_SYMBOL_TABLE) $@
390	$(NM) -n $< > $@	381	$(NM) -n $< > $@
391		382
392		383
393		384
394	# Link: create ELF output file from object files.	385	# Link: create ELF output file from object files.
395	.SECONDARY : $(TARGET).elf	386	.SECONDARY : $(TARGET).elf
396	.PRECIOUS : $(OBJ)	387	.PRECIOUS : $(OBJ)
397	%.elf: $(OBJ)	388	%.elf: $(OBJ)
398	@echo	389	@echo
399	@echo $(MSG_LINKING) $@	390	@echo $(MSG_LINKING) $@
400	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)	391	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
401		392
402		393
403	# Compile: create object files from C source files.	394	# Compile: create object files from C source files.
404	%.o : %.c	395	%.o : %.c
405	@echo	396	@echo
406	@echo $(MSG_COMPILING) $<	397	@echo $(MSG_COMPILING) $<
407	$(CC) -c $(ALL_CFLAGS) $< -o $@	398	$(CC) -c $(ALL_CFLAGS) $< -o $@
408		399
409		400
410	# Compile: create assembler files from C source files.	401	# Compile: create assembler files from C source files.
411	%.s : %.c	402	%.s : %.c
412	$(CC) -S $(ALL_CFLAGS) $< -o $@	403	$(CC) -S $(ALL_CFLAGS) $< -o $@
413		404
414		405
415	# Assemble: create object files from assembler source files.	406	# Assemble: create object files from assembler source files.
416	%.o : %.S	407	%.o : %.S
417	@echo	408	@echo
418	@echo $(MSG_ASSEMBLING) $<	409	@echo $(MSG_ASSEMBLING) $<
419	$(CC) -c $(ALL_ASFLAGS) $< -o $@	410	$(CC) -c $(ALL_ASFLAGS) $< -o $@
420		411
421		412
422		413
423	# Target: clean project.	414	# Target: clean project.
424	clean: begin clean_list finished end	415	clean: begin clean_list finished end
425		416
426	clean_list :	417	clean_list :
427	@echo	418	@echo
428	@echo $(MSG_CLEANING)	419	@echo $(MSG_CLEANING)
429	$(REMOVE) $(TARGET).hex	420	$(REMOVE) $(TARGET).hex
430	$(REMOVE) $(TARGET).eep	421	$(REMOVE) $(TARGET).eep
431	$(REMOVE) $(TARGET).obj	422	$(REMOVE) $(TARGET).obj
432	$(REMOVE) $(TARGET).cof	423	$(REMOVE) $(TARGET).cof
433	$(REMOVE) $(TARGET).elf	424	$(REMOVE) $(TARGET).elf
434	$(REMOVE) $(TARGET).map	425	$(REMOVE) $(TARGET).map
435	$(REMOVE) $(TARGET).obj	426	$(REMOVE) $(TARGET).obj
436	$(REMOVE) $(TARGET).a90	427	$(REMOVE) $(TARGET).a90
437	$(REMOVE) $(TARGET).sym	428	$(REMOVE) $(TARGET).sym
438	$(REMOVE) $(TARGET).lnk	429	$(REMOVE) $(TARGET).lnk
439	$(REMOVE) $(TARGET).lss	430	$(REMOVE) $(TARGET).lss
440	$(REMOVE) $(OBJ)	431	$(REMOVE) $(OBJ)
441	$(REMOVE) $(LST)	432	$(REMOVE) $(LST)
442	$(REMOVE) $(SRC:.c=.s)	433	$(REMOVE) $(SRC:.c=.s)
443	$(REMOVE) $(SRC:.c=.d)	434	$(REMOVE) $(SRC:.c=.d)
444	$(REMOVE) .dep/*	435	$(REMOVE) .dep/*
445		436
446		437
447		438
448	# Include the dependency files.	439	# Include the dependency files.
449	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)	440	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
450		441
451		442
452	# Listing of phony targets.	443	# Listing of phony targets.
453	.PHONY : all begin finish end sizebefore sizeafter gccversion \	444	.PHONY : all begin finish end sizebefore sizeafter gccversion \
454	build elf hex eep lss sym coff extcoff \	445	build elf hex eep lss sym coff extcoff \
455	clean clean_list program programlock programinit	446	clean clean_list program programlock programinit
456		447

Subversion Repositories HomeAutomation

(root)/trunk/EmbeddedSoftware/AVR/standalone/Can2Serial/makefile – Rev 658 → 665