WebSVN – HomeAutomation – Diff – /trunk/EmbeddedSoftware/AVR/standalone/Can2Serial/makefile


# Hey Emacs, this is a -*- makefile -*-
#
# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.
# Released to the Public Domain
# Please read the make user manual!
#
# Additional material for this makefile was submitted by:
#  Tim Henigan
#  Peter Fleury
#  Reiner Patommel
#  Sander Pool
#  Frederik Rouleau
#  Markus Pfaff
#
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
#
# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
#                4.07 or greater).
#
# make program = Download the hex file to the device, using avrdude.  Please
#                customize the avrdude settings below first!
#
# make filename.s = Just compile filename.c into the assembler code only
#
# To rebuild project do "make clean" then "make all".
#
 
########
# Differences from WinAVR 20040720 sample:
# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
# - F_OSC Define in CFLAGS and AFLAGS
 
 
# MCU name
#MCU = atmega32
#MCU = atmega8
MCU = atmega88
#MCU = atmega168
 
 
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
 
 
# Target file name (without extension).
TARGET = main
 
LIBDIR = ../../avr-lib/
 
# List C source files here. (C dependencies are automatically generated.)
SRC =	$(TARGET).c\
		$(LIBDIR)drivers/uart/serial.c\
		$(LIBDIR)drivers/uart/uart.c\
		$(LIBDIR)drivers/timer/timebase.c\
		$(LIBDIR)drivers/mcu/mcu.c\
		$(LIBDIR)drivers/can/stdcan.c\
		$(LIBDIR)drivers/can/mcp2515/mcp2515.c\
		
# List Assembler source files here.
# Make them always end in a capital .S.  Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = 
 
 
# Optimization level, can be [0, 1, 2, 3, s]. 
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
#OPT = 3
 
# Debugging format.
# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
#DEBUG = stabs
DEBUG = dwarf-2
 
# List any extra directories to look for include files here.
#     Each directory must be seperated by a space.
EXTRAINCDIRS = $(LIBDIR)drivers/uart $(LIBDIR)drivers/timer $(LIBDIR)drivers/mcu $(LIBDIR)drivers/can/mcp2515/ $(LIBDIR)drivers/can/ $(LIBDIR) 
 
# Compiler flag to set the C Standard level.
# c89   - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99   - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
 
# Place -D or -U options here
CDEFS =
 
# Place -I options here
CINCS =
 
 
# Compiler flags.
#  -g*:          generate debugging information
#  -O*:          optimization level
#  -f...:        tuning, see GCC manual and avr-libc documentation
#  -Wall...:     warning level
#  -Wa,...:      tell GCC to pass this to the assembler.
#    -adhlns...: create assembler listing
CFLAGS = 
#CFLAGS += -g$(DEBUG)
CFLAGS += $(CDEFS) $(CINCS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wstrict-prototypes
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#CFLAGS += -DF_CPU=$(F_CPU)
 
 
 
# Assembler flags.
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing
#  -gstabs:   have the assembler create line number information; note that
#             for use in COFF files, additional information about filenames
#             and function names needs to be present in the assembler source
#             files -- see avr-libc docs [FIXME: not yet described there]
##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
#ASFLAGS += -DF_OSC=$(F_OSC)
 
 
#Additional libraries.
 
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
PRINTF_LIB = 
 
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
SCANF_LIB = 
 
MATH_LIB = -lm
 
# External memory options
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
 
EXTMEMOPTS =
 
# Linker flags.
#  -Wl,...:     tell GCC to pass this to linker.
#    -Map:      create map file
#    --cref:    add cross reference to  map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 
 
 
 
# Programming support using avrdude. Settings and variables.
 
# Programming hardware: alf avr910 avrisp bascom bsd 
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
AVRDUDE_PROGRAMMER = dragon_isp
 
# com1 = serial port. Use lpt1 to connect to parallel port.
AVRDUDE_PORT = usb    # programmer connected to serial device
AVRDUDE_BAUD = 115200
 
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 
 
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
 
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
 
# Increase verbosity level.  Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
 
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 
 
 
# ---------------------------------------------------------------------------
 
# Define directories, if needed.
DIRAVR = c:/progra~1/winavr
DIRAVRBIN = $(DIRAVR)/bin
DIRAVRUTILS = $(DIRAVR)/utils/bin
DIRINC = .
DIRLIB = $(DIRAVR)/avr/lib
 
 
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
NM = avr-nm
AVRDUDE = avrdude
REMOVE = rm -f
COPY = cp
 
 
 
 
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = --------  end  --------
MSG_SIZE_BEFORE = Size before: 
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
 
 
 
 
# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
 
# Define all listing files.
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
 
 
# Compiler flags to generate dependency files.
### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
 
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 
 
 
# Default target.
all: begin gccversion sizebefore build sizeafter finished end
 
build: elf hex eep lss sym
 
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss 
sym: $(TARGET).sym
 
 
 
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
	@echo
	@echo $(MSG_BEGIN)
 
finished:
	@echo $(MSG_ERRORS_NONE)
 
end:
	@echo $(MSG_END)
	@echo
 
 
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf
sizebefore:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
 
sizeafter:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
 
 
 
# Display compiler version information.
gccversion : 
	@$(CC) --version
 
 
 
# Program the device.  
program: $(TARGET).hex $(TARGET).eep
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
#programlock: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
 
#programinit: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
 
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .data-0x800000 \
--change-section-address .bss-0x800000 \
--change-section-address .noinit-0x800000 \
--change-section-address .eeprom-0x810000 
 
 
coff: $(TARGET).elf
	@echo
	@echo $(MSG_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 
 
extcoff: $(TARGET).elf
	@echo
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 
 
 
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
	@echo
	@echo $(MSG_FLASH) $@
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 
%.eep: %.elf
	@echo
	@echo $(MSG_EEPROM) $@
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
# Create extended listing file from ELF output file.
%.lss: %.elf
	@echo
	@echo $(MSG_EXTENDED_LISTING) $@
	$(OBJDUMP) -h -S $< > $@
 
# Create a symbol table from ELF output file.
%.sym: %.elf
	@echo
	@echo $(MSG_SYMBOL_TABLE) $@
	$(NM) -n $< > $@
 
 
 
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
	@echo
	@echo $(MSG_LINKING) $@
	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
 
 
# Compile: create object files from C source files.
%.o : %.c
	@echo
	@echo $(MSG_COMPILING) $<
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
 
 
# Compile: create assembler files from C source files.
%.s : %.c
	$(CC) -S $(ALL_CFLAGS) $< -o $@
 
 
# Assemble: create object files from assembler source files.
%.o : %.S
	@echo
	@echo $(MSG_ASSEMBLING) $<
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
 
 
 
# Target: clean project.
clean: begin clean_list finished end
 
clean_list :
	@echo
	@echo $(MSG_CLEANING)
	$(REMOVE) $(TARGET).hex
	$(REMOVE) $(TARGET).eep
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).cof
	$(REMOVE) $(TARGET).elf
	$(REMOVE) $(TARGET).map
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).a90
	$(REMOVE) $(TARGET).sym
	$(REMOVE) $(TARGET).lnk
	$(REMOVE) $(TARGET).lss
	$(REMOVE) $(OBJ)
	$(REMOVE) $(LST)
	$(REMOVE) $(SRC:.c=.s)
	$(REMOVE) $(SRC:.c=.d)
	$(REMOVE) .dep/*
 
 
 
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 
 
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list program programlock programinit
 

Rev 693	Rev 698
1	# Hey Emacs, this is a -- makefile --	1	# Hey Emacs, this is a -- makefile --
2	#	2	#
3	# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.	3	# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.
4	# Released to the Public Domain	4	# Released to the Public Domain
5	# Please read the make user manual!	5	# Please read the make user manual!
6	#	6	#
7	# Additional material for this makefile was submitted by:	7	# Additional material for this makefile was submitted by:
8	# Tim Henigan	8	# Tim Henigan
9	# Peter Fleury	9	# Peter Fleury
10	# Reiner Patommel	10	# Reiner Patommel
11	# Sander Pool	11	# Sander Pool
12	# Frederik Rouleau	12	# Frederik Rouleau
13	# Markus Pfaff	13	# Markus Pfaff
14	#	14	#
15	# On command line:	15	# On command line:
16	#	16	#
17	# make all = Make software.	17	# make all = Make software.
18	#	18	#
19	# make clean = Clean out built project files.	19	# make clean = Clean out built project files.
20	#	20	#
21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).	21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
22	#	22	#
23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio	23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
24	# 4.07 or greater).	24	# 4.07 or greater).
25	#	25	#
26	# make program = Download the hex file to the device, using avrdude. Please	26	# make program = Download the hex file to the device, using avrdude. Please
27	# customize the avrdude settings below first!	27	# customize the avrdude settings below first!
28	#	28	#
29	# make filename.s = Just compile filename.c into the assembler code only	29	# make filename.s = Just compile filename.c into the assembler code only
30	#	30	#
31	# To rebuild project do "make clean" then "make all".	31	# To rebuild project do "make clean" then "make all".
32	#	32	#
33		33
34	########	34	########
35	# Differences from WinAVR 20040720 sample:	35	# Differences from WinAVR 20040720 sample:
36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)	36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
37	# - F_OSC Define in CFLAGS and AFLAGS	37	# - F_OSC Define in CFLAGS and AFLAGS
38		38
39		39
40	# MCU name	40	# MCU name
41	#MCU = atmega32	41	#MCU = atmega32
42	#MCU = atmega8	42	#MCU = atmega8
43	~~#MCU~~ = atmega88	43	MCU = atmega88
44	~~MCU~~ = atmega168	44	#MCU = atmega168
45		45
46		46
47	# Output format. (can be srec, ihex, binary)	47	# Output format. (can be srec, ihex, binary)
48	FORMAT = ihex	48	FORMAT = ihex
49		49
50		50
51	# Target file name (without extension).	51	# Target file name (without extension).
52	TARGET = main	52	TARGET = main
53		53
54	LIBDIR = ../../avr-lib/	54	LIBDIR = ../../avr-lib/
55		55
56	# List C source files here. (C dependencies are automatically generated.)	56	# List C source files here. (C dependencies are automatically generated.)
57	SRC = $(TARGET).c\	57	SRC = $(TARGET).c\
58	$(LIBDIR)drivers/uart/serial.c\	58	$(LIBDIR)drivers/uart/serial.c\
59	$(LIBDIR)drivers/uart/uart.c\	59	$(LIBDIR)drivers/uart/uart.c\
60	$(LIBDIR)drivers/timer/timebase.c\	60	$(LIBDIR)drivers/timer/timebase.c\
61	$(LIBDIR)drivers/mcu/mcu.c\	61	$(LIBDIR)drivers/mcu/mcu.c\
62	$(LIBDIR)drivers/can/stdcan.c\	62	$(LIBDIR)drivers/can/stdcan.c\
63	$(LIBDIR)drivers/can/mcp2515/mcp2515.c\	63	$(LIBDIR)drivers/can/mcp2515/mcp2515.c\
64		64
65	# List Assembler source files here.	65	# List Assembler source files here.
66	# Make them always end in a capital .S. Files ending in a lowercase .s	66	# Make them always end in a capital .S. Files ending in a lowercase .s
67	# will not be considered source files but generated files (assembler	67	# will not be considered source files but generated files (assembler
68	# output from the compiler), and will be deleted upon "make clean"!	68	# output from the compiler), and will be deleted upon "make clean"!
69	# Even though the DOS/Win* filesystem matches both .s and .S the same,	69	# Even though the DOS/Win* filesystem matches both .s and .S the same,
70	# it will preserve the spelling of the filenames, and gcc itself does	70	# it will preserve the spelling of the filenames, and gcc itself does
71	# care about how the name is spelled on its command-line.	71	# care about how the name is spelled on its command-line.
72	ASRC =	72	ASRC =
73		73
74		74
75	# Optimization level, can be [0, 1, 2, 3, s].	75	# Optimization level, can be [0, 1, 2, 3, s].
76	# 0 = turn off optimization. s = optimize for size.	76	# 0 = turn off optimization. s = optimize for size.
77	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)	77	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
78	OPT = s	78	OPT = s
79	#OPT = 3	79	#OPT = 3
80		80
81	# Debugging format.	81	# Debugging format.
82	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.	82	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
83	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.	83	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
84	#DEBUG = stabs	84	#DEBUG = stabs
85	DEBUG = dwarf-2	85	DEBUG = dwarf-2
86		86
87	# List any extra directories to look for include files here.	87	# List any extra directories to look for include files here.
88	# Each directory must be seperated by a space.	88	# Each directory must be seperated by a space.
89	EXTRAINCDIRS = $(LIBDIR)drivers/uart $(LIBDIR)drivers/timer $(LIBDIR)drivers/mcu $(LIBDIR)drivers/can/mcp2515/ $(LIBDIR)drivers/can/ $(LIBDIR)	89	EXTRAINCDIRS = $(LIBDIR)drivers/uart $(LIBDIR)drivers/timer $(LIBDIR)drivers/mcu $(LIBDIR)drivers/can/mcp2515/ $(LIBDIR)drivers/can/ $(LIBDIR)
90		90
91	# Compiler flag to set the C Standard level.	91	# Compiler flag to set the C Standard level.
92	# c89 - "ANSI" C	92	# c89 - "ANSI" C
93	# gnu89 - c89 plus GCC extensions	93	# gnu89 - c89 plus GCC extensions
94	# c99 - ISO C99 standard (not yet fully implemented)	94	# c99 - ISO C99 standard (not yet fully implemented)
95	# gnu99 - c99 plus GCC extensions	95	# gnu99 - c99 plus GCC extensions
96	CSTANDARD = -std=gnu99	96	CSTANDARD = -std=gnu99
97		97
98	# Place -D or -U options here	98	# Place -D or -U options here
99	CDEFS =	99	CDEFS =
100		100
101	# Place -I options here	101	# Place -I options here
102	CINCS =	102	CINCS =
103		103
104		104
105	# Compiler flags.	105	# Compiler flags.
106	# -g*: generate debugging information	106	# -g*: generate debugging information
107	# -O*: optimization level	107	# -O*: optimization level
108	# -f...: tuning, see GCC manual and avr-libc documentation	108	# -f...: tuning, see GCC manual and avr-libc documentation
109	# -Wall...: warning level	109	# -Wall...: warning level
110	# -Wa,...: tell GCC to pass this to the assembler.	110	# -Wa,...: tell GCC to pass this to the assembler.
111	# -adhlns...: create assembler listing	111	# -adhlns...: create assembler listing
112	CFLAGS =	112	CFLAGS =
113	#CFLAGS += -g$(DEBUG)	113	#CFLAGS += -g$(DEBUG)
114	CFLAGS += $(CDEFS) $(CINCS)	114	CFLAGS += $(CDEFS) $(CINCS)
115	CFLAGS += -O$(OPT)	115	CFLAGS += -O$(OPT)
116	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums	116	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
117	CFLAGS += -Wall -Wstrict-prototypes	117	CFLAGS += -Wall -Wstrict-prototypes
118	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)	118	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
119	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))	119	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
120	CFLAGS += $(CSTANDARD)	120	CFLAGS += $(CSTANDARD)
121	#CFLAGS += -DF_CPU=$(F_CPU)	121	#CFLAGS += -DF_CPU=$(F_CPU)
122		122
123		123
124		124
125	# Assembler flags.	125	# Assembler flags.
126	# -Wa,...: tell GCC to pass this to the assembler.	126	# -Wa,...: tell GCC to pass this to the assembler.
127	# -ahlms: create listing	127	# -ahlms: create listing
128	# -gstabs: have the assembler create line number information; note that	128	# -gstabs: have the assembler create line number information; note that
129	# for use in COFF files, additional information about filenames	129	# for use in COFF files, additional information about filenames
130	# and function names needs to be present in the assembler source	130	# and function names needs to be present in the assembler source
131	# files -- see avr-libc docs [FIXME: not yet described there]	131	# files -- see avr-libc docs [FIXME: not yet described there]
132	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs	132	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
133	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)	133	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
134	#ASFLAGS += -DF_OSC=$(F_OSC)	134	#ASFLAGS += -DF_OSC=$(F_OSC)
135		135
136		136
137	#Additional libraries.	137	#Additional libraries.
138		138
139	# Minimalistic printf version	139	# Minimalistic printf version
140	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min	140	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
141		141
142	# Floating point printf version (requires MATH_LIB = -lm below)	142	# Floating point printf version (requires MATH_LIB = -lm below)
143	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt	143	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
144		144
145	PRINTF_LIB =	145	PRINTF_LIB =
146		146
147	# Minimalistic scanf version	147	# Minimalistic scanf version
148	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min	148	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
149		149
150	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)	150	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
151	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt	151	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
152		152
153	SCANF_LIB =	153	SCANF_LIB =
154		154
155	MATH_LIB = -lm	155	MATH_LIB = -lm
156		156
157	# External memory options	157	# External memory options
158		158
159	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	159	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
160	# used for variables (.data/.bss) and heap (malloc()).	160	# used for variables (.data/.bss) and heap (malloc()).
161	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff	161	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
162		162
163	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	163	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
164	# only used for heap (malloc()).	164	# only used for heap (malloc()).
165	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff	165	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
166		166
167	EXTMEMOPTS =	167	EXTMEMOPTS =
168		168
169	# Linker flags.	169	# Linker flags.
170	# -Wl,...: tell GCC to pass this to linker.	170	# -Wl,...: tell GCC to pass this to linker.
171	# -Map: create map file	171	# -Map: create map file
172	# --cref: add cross reference to map file	172	# --cref: add cross reference to map file
173	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref	173	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
174	LDFLAGS += $(EXTMEMOPTS)	174	LDFLAGS += $(EXTMEMOPTS)
175	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)	175	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
176		176
177		177
178		178
179		179
180	# Programming support using avrdude. Settings and variables.	180	# Programming support using avrdude. Settings and variables.
181		181
182	# Programming hardware: alf avr910 avrisp bascom bsd	182	# Programming hardware: alf avr910 avrisp bascom bsd
183	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500	183	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
184	#	184	#
185	# Type: avrdude -c ?	185	# Type: avrdude -c ?
186	# to get a full listing.	186	# to get a full listing.
187	#	187	#
188	AVRDUDE_PROGRAMMER = dragon_isp	188	AVRDUDE_PROGRAMMER = dragon_isp
189		189
190	# com1 = serial port. Use lpt1 to connect to parallel port.	190	# com1 = serial port. Use lpt1 to connect to parallel port.
191	AVRDUDE_PORT = usb # programmer connected to serial device	191	AVRDUDE_PORT = usb # programmer connected to serial device
192	AVRDUDE_BAUD = 115200	192	AVRDUDE_BAUD = 115200
193		193
194	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex	194	AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
195	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep	195	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
196		196
197		197
198	# Uncomment the following if you want avrdude's erase cycle counter.	198	# Uncomment the following if you want avrdude's erase cycle counter.
199	# Note that this counter needs to be initialized first using -Yn,	199	# Note that this counter needs to be initialized first using -Yn,
200	# see avrdude manual.	200	# see avrdude manual.
201	#AVRDUDE_ERASE_COUNTER = -y	201	#AVRDUDE_ERASE_COUNTER = -y
202		202
203	# Uncomment the following if you do /not/ wish a verification to be	203	# Uncomment the following if you do /not/ wish a verification to be
204	# performed after programming the device.	204	# performed after programming the device.
205	#AVRDUDE_NO_VERIFY = -V	205	#AVRDUDE_NO_VERIFY = -V
206		206
207	# Increase verbosity level. Please use this when submitting bug	207	# Increase verbosity level. Please use this when submitting bug
208	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>	208	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
209	# to submit bug reports.	209	# to submit bug reports.
210	#AVRDUDE_VERBOSE = -v -v	210	#AVRDUDE_VERBOSE = -v -v
211		211
212	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)	212	AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
213	AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)	213	AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
214	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)	214	AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
215	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)	215	AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
216		216
217		217
218		218
219	# ---------------------------------------------------------------------------	219	# ---------------------------------------------------------------------------
220		220
221	# Define directories, if needed.	221	# Define directories, if needed.
222	DIRAVR = c:/progra~1/winavr	222	DIRAVR = c:/progra~1/winavr
223	DIRAVRBIN = $(DIRAVR)/bin	223	DIRAVRBIN = $(DIRAVR)/bin
224	DIRAVRUTILS = $(DIRAVR)/utils/bin	224	DIRAVRUTILS = $(DIRAVR)/utils/bin
225	DIRINC = .	225	DIRINC = .
226	DIRLIB = $(DIRAVR)/avr/lib	226	DIRLIB = $(DIRAVR)/avr/lib
227		227
228		228
229	# Define programs and commands.	229	# Define programs and commands.
230	SHELL = sh	230	SHELL = sh
231	CC = avr-gcc	231	CC = avr-gcc
232	OBJCOPY = avr-objcopy	232	OBJCOPY = avr-objcopy
233	OBJDUMP = avr-objdump	233	OBJDUMP = avr-objdump
234	SIZE = avr-size	234	SIZE = avr-size
235	NM = avr-nm	235	NM = avr-nm
236	AVRDUDE = avrdude	236	AVRDUDE = avrdude
237	REMOVE = rm -f	237	REMOVE = rm -f
238	COPY = cp	238	COPY = cp
239		239
240		240
241		241
242		242
243	# Define Messages	243	# Define Messages
244	# English	244	# English
245	MSG_ERRORS_NONE = Errors: none	245	MSG_ERRORS_NONE = Errors: none
246	MSG_BEGIN = -------- begin --------	246	MSG_BEGIN = -------- begin --------
247	MSG_END = -------- end --------	247	MSG_END = -------- end --------
248	MSG_SIZE_BEFORE = Size before:	248	MSG_SIZE_BEFORE = Size before:
249	MSG_SIZE_AFTER = Size after:	249	MSG_SIZE_AFTER = Size after:
250	MSG_COFF = Converting to AVR COFF:	250	MSG_COFF = Converting to AVR COFF:
251	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:	251	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
252	MSG_FLASH = Creating load file for Flash:	252	MSG_FLASH = Creating load file for Flash:
253	MSG_EEPROM = Creating load file for EEPROM:	253	MSG_EEPROM = Creating load file for EEPROM:
254	MSG_EXTENDED_LISTING = Creating Extended Listing:	254	MSG_EXTENDED_LISTING = Creating Extended Listing:
255	MSG_SYMBOL_TABLE = Creating Symbol Table:	255	MSG_SYMBOL_TABLE = Creating Symbol Table:
256	MSG_LINKING = Linking:	256	MSG_LINKING = Linking:
257	MSG_COMPILING = Compiling:	257	MSG_COMPILING = Compiling:
258	MSG_ASSEMBLING = Assembling:	258	MSG_ASSEMBLING = Assembling:
259	MSG_CLEANING = Cleaning project:	259	MSG_CLEANING = Cleaning project:
260		260
261		261
262		262
263		263
264	# Define all object files.	264	# Define all object files.
265	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)	265	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
266		266
267	# Define all listing files.	267	# Define all listing files.
268	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)	268	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
269		269
270		270
271	# Compiler flags to generate dependency files.	271	# Compiler flags to generate dependency files.
272	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d	272	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
273	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d	273	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
274		274
275	# Combine all necessary flags and optional flags.	275	# Combine all necessary flags and optional flags.
276	# Add target processor to flags.	276	# Add target processor to flags.
277	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)	277	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
278	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)	278	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
279		279
280		280
281		281
282		282
283		283
284	# Default target.	284	# Default target.
285	all: begin gccversion sizebefore build sizeafter finished end	285	all: begin gccversion sizebefore build sizeafter finished end
286		286
287	build: elf hex eep lss sym	287	build: elf hex eep lss sym
288		288
289	elf: $(TARGET).elf	289	elf: $(TARGET).elf
290	hex: $(TARGET).hex	290	hex: $(TARGET).hex
291	eep: $(TARGET).eep	291	eep: $(TARGET).eep
292	lss: $(TARGET).lss	292	lss: $(TARGET).lss
293	sym: $(TARGET).sym	293	sym: $(TARGET).sym
294		294
295		295
296		296
297	# Eye candy.	297	# Eye candy.
298	# AVR Studio 3.x does not check make's exit code but relies on	298	# AVR Studio 3.x does not check make's exit code but relies on
299	# the following magic strings to be generated by the compile job.	299	# the following magic strings to be generated by the compile job.
300	begin:	300	begin:
301	@echo	301	@echo
302	@echo $(MSG_BEGIN)	302	@echo $(MSG_BEGIN)
303		303
304	finished:	304	finished:
305	@echo $(MSG_ERRORS_NONE)	305	@echo $(MSG_ERRORS_NONE)
306		306
307	end:	307	end:
308	@echo $(MSG_END)	308	@echo $(MSG_END)
309	@echo	309	@echo
310		310
311		311
312	# Display size of file.	312	# Display size of file.
313	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex	313	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
314	ELFSIZE = $(SIZE) -A $(TARGET).elf	314	ELFSIZE = $(SIZE) -A $(TARGET).elf
315	sizebefore:	315	sizebefore:
316	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi	316	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
317		317
318	sizeafter:	318	sizeafter:
319	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi	319	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
320		320
321		321
322		322
323	# Display compiler version information.	323	# Display compiler version information.
324	gccversion :	324	gccversion :
325	@$(CC) --version	325	@$(CC) --version
326		326
327		327
328		328
329	# Program the device.	329	# Program the device.
330	program: $(TARGET).hex $(TARGET).eep	330	program: $(TARGET).hex $(TARGET).eep
331	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)	331	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
332		332
333	#programlock:	333	#programlock:
334	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m	334	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
335		335
336	#programinit:	336	#programinit:
337	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m	337	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
338		338
339	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.	339	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
340	COFFCONVERT=$(OBJCOPY) --debugging \	340	COFFCONVERT=$(OBJCOPY) --debugging \
341	--change-section-address .data-0x800000 \	341	--change-section-address .data-0x800000 \
342	--change-section-address .bss-0x800000 \	342	--change-section-address .bss-0x800000 \
343	--change-section-address .noinit-0x800000 \	343	--change-section-address .noinit-0x800000 \
344	--change-section-address .eeprom-0x810000	344	--change-section-address .eeprom-0x810000
345		345
346		346
347	coff: $(TARGET).elf	347	coff: $(TARGET).elf
348	@echo	348	@echo
349	@echo $(MSG_COFF) $(TARGET).cof	349	@echo $(MSG_COFF) $(TARGET).cof
350	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof	350	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
351		351
352		352
353	extcoff: $(TARGET).elf	353	extcoff: $(TARGET).elf
354	@echo	354	@echo
355	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof	355	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
356	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof	356	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
357		357
358		358
359		359
360	# Create final output files (.hex, .eep) from ELF output file.	360	# Create final output files (.hex, .eep) from ELF output file.
361	%.hex: %.elf	361	%.hex: %.elf
362	@echo	362	@echo
363	@echo $(MSG_FLASH) $@	363	@echo $(MSG_FLASH) $@
364	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@	364	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
365		365
366	%.eep: %.elf	366	%.eep: %.elf
367	@echo	367	@echo
368	@echo $(MSG_EEPROM) $@	368	@echo $(MSG_EEPROM) $@
369	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \	369	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
370	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@	370	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
371		371
372	# Create extended listing file from ELF output file.	372	# Create extended listing file from ELF output file.
373	%.lss: %.elf	373	%.lss: %.elf
374	@echo	374	@echo
375	@echo $(MSG_EXTENDED_LISTING) $@	375	@echo $(MSG_EXTENDED_LISTING) $@
376	$(OBJDUMP) -h -S $< > $@	376	$(OBJDUMP) -h -S $< > $@
377		377
378	# Create a symbol table from ELF output file.	378	# Create a symbol table from ELF output file.
379	%.sym: %.elf	379	%.sym: %.elf
380	@echo	380	@echo
381	@echo $(MSG_SYMBOL_TABLE) $@	381	@echo $(MSG_SYMBOL_TABLE) $@
382	$(NM) -n $< > $@	382	$(NM) -n $< > $@
383		383
384		384
385		385
386	# Link: create ELF output file from object files.	386	# Link: create ELF output file from object files.
387	.SECONDARY : $(TARGET).elf	387	.SECONDARY : $(TARGET).elf
388	.PRECIOUS : $(OBJ)	388	.PRECIOUS : $(OBJ)
389	%.elf: $(OBJ)	389	%.elf: $(OBJ)
390	@echo	390	@echo
391	@echo $(MSG_LINKING) $@	391	@echo $(MSG_LINKING) $@
392	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)	392	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
393		393
394		394
395	# Compile: create object files from C source files.	395	# Compile: create object files from C source files.
396	%.o : %.c	396	%.o : %.c
397	@echo	397	@echo
398	@echo $(MSG_COMPILING) $<	398	@echo $(MSG_COMPILING) $<
399	$(CC) -c $(ALL_CFLAGS) $< -o $@	399	$(CC) -c $(ALL_CFLAGS) $< -o $@
400		400
401		401
402	# Compile: create assembler files from C source files.	402	# Compile: create assembler files from C source files.
403	%.s : %.c	403	%.s : %.c
404	$(CC) -S $(ALL_CFLAGS) $< -o $@	404	$(CC) -S $(ALL_CFLAGS) $< -o $@
405		405
406		406
407	# Assemble: create object files from assembler source files.	407	# Assemble: create object files from assembler source files.
408	%.o : %.S	408	%.o : %.S
409	@echo	409	@echo
410	@echo $(MSG_ASSEMBLING) $<	410	@echo $(MSG_ASSEMBLING) $<
411	$(CC) -c $(ALL_ASFLAGS) $< -o $@	411	$(CC) -c $(ALL_ASFLAGS) $< -o $@
412		412
413		413
414		414
415	# Target: clean project.	415	# Target: clean project.
416	clean: begin clean_list finished end	416	clean: begin clean_list finished end
417		417
418	clean_list :	418	clean_list :
419	@echo	419	@echo
420	@echo $(MSG_CLEANING)	420	@echo $(MSG_CLEANING)
421	$(REMOVE) $(TARGET).hex	421	$(REMOVE) $(TARGET).hex
422	$(REMOVE) $(TARGET).eep	422	$(REMOVE) $(TARGET).eep
423	$(REMOVE) $(TARGET).obj	423	$(REMOVE) $(TARGET).obj
424	$(REMOVE) $(TARGET).cof	424	$(REMOVE) $(TARGET).cof
425	$(REMOVE) $(TARGET).elf	425	$(REMOVE) $(TARGET).elf
426	$(REMOVE) $(TARGET).map	426	$(REMOVE) $(TARGET).map
427	$(REMOVE) $(TARGET).obj	427	$(REMOVE) $(TARGET).obj
428	$(REMOVE) $(TARGET).a90	428	$(REMOVE) $(TARGET).a90
429	$(REMOVE) $(TARGET).sym	429	$(REMOVE) $(TARGET).sym
430	$(REMOVE) $(TARGET).lnk	430	$(REMOVE) $(TARGET).lnk
431	$(REMOVE) $(TARGET).lss	431	$(REMOVE) $(TARGET).lss
432	$(REMOVE) $(OBJ)	432	$(REMOVE) $(OBJ)
433	$(REMOVE) $(LST)	433	$(REMOVE) $(LST)
434	$(REMOVE) $(SRC:.c=.s)	434	$(REMOVE) $(SRC:.c=.s)
435	$(REMOVE) $(SRC:.c=.d)	435	$(REMOVE) $(SRC:.c=.d)
436	$(REMOVE) .dep/*	436	$(REMOVE) .dep/*
437		437
438		438
439		439
440	# Include the dependency files.	440	# Include the dependency files.
441	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)	441	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
442		442
443		443
444	# Listing of phony targets.	444	# Listing of phony targets.
445	.PHONY : all begin finish end sizebefore sizeafter gccversion \	445	.PHONY : all begin finish end sizebefore sizeafter gccversion \
446	build elf hex eep lss sym coff extcoff \	446	build elf hex eep lss sym coff extcoff \
447	clean clean_list program programlock programinit	447	clean clean_list program programlock programinit
448		448

Subversion Repositories HomeAutomation

(root)/trunk/EmbeddedSoftware/AVR/standalone/Can2Serial/makefile – Rev 693 → 698