WebSVN – HomeAutomation – Diff – /trunk/EmbeddedSoftware/AVR/standalone/Can2Serial/makefile


# Hey Emacs, this is a -*- makefile -*-
#
# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.
# Released to the Public Domain
# Please read the make user manual!
#
# Additional material for this makefile was submitted by:
#  Tim Henigan
#  Peter Fleury
#  Reiner Patommel
#  Sander Pool
#  Frederik Rouleau
#  Markus Pfaff
#
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
#
# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
#                4.07 or greater).
#
# make program = Download the hex file to the device, using avrdude.  Please
#                customize the avrdude settings below first!
#
# make filename.s = Just compile filename.c into the assembler code only
#
# To rebuild project do "make clean" then "make all".
#
 
########
# Differences from WinAVR 20040720 sample:
# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
# - F_OSC Define in CFLAGS and AFLAGS
 
## HomeAutomation-users! Make sure you have a system.inc in your EmbeddedSoftware/AVR/personal folder ##
 
 
## FUSES, will automatically be programmed ##
#MCU = atmega8
 
#MCU = atmega88
#HIGHFUSE=0xdc
#LOWFUSE=0xe2
#EXTFUSE=0x01
 
MCU = atmega168
HIGHFUSE=0xdc
LOWFUSE=0xe2
EXTFUSE=0x01
 
 
# for using the same system.inc we use BIOSDIR and BIOSTARGET for setting the correct file to flash
# flash:w:$(BIOSDIR)/$(BIOSTARGET).hex
BIOSDIR = .
BIOSTARGET = main
include ../../personal/system.inc
 
 
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
 
 
# Target file name (without extension).
TARGET = main
 
LIBDIR = ../../avr-lib/
 
# List C source files here. (C dependencies are automatically generated.)
SRC =	$(TARGET).c\
		$(LIBDIR)drivers/uart/serial.c\
		$(LIBDIR)drivers/uart/uart.c\
		$(LIBDIR)drivers/timer/timebase.c\
		$(LIBDIR)drivers/mcu/mcu.c\
		$(LIBDIR)drivers/can/stdcan.c\
		$(LIBDIR)drivers/can/mcp2515/mcp2515.c\
		
# List Assembler source files here.
# Make them always end in a capital .S.  Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = 
 
 
# Optimization level, can be [0, 1, 2, 3, s]. 
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
#OPT = 3
 
# Debugging format.
# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
#DEBUG = stabs
DEBUG = dwarf-2
 
# List any extra directories to look for include files here.
#     Each directory must be seperated by a space.
EXTRAINCDIRS = $(LIBDIR)drivers/uart $(LIBDIR)drivers/timer $(LIBDIR)drivers/mcu $(LIBDIR)drivers/can/mcp2515/ $(LIBDIR)drivers/can/ $(LIBDIR) 
 
# Compiler flag to set the C Standard level.
# c89   - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99   - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
 
# Place -D or -U options here
CDEFS =
 
# Place -I options here
CINCS =
 
 
# Compiler flags.
#  -g*:          generate debugging information
#  -O*:          optimization level
#  -f...:        tuning, see GCC manual and avr-libc documentation
#  -Wall...:     warning level
#  -Wa,...:      tell GCC to pass this to the assembler.
#    -adhlns...: create assembler listing
CFLAGS = 
#CFLAGS += -g$(DEBUG)
CFLAGS += $(CDEFS) $(CINCS)
CFLAGS += -O$(OPT)
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
CFLAGS += -Wall -Wstrict-prototypes
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
#CFLAGS += -DF_CPU=$(F_CPU)
 
 
 
# Assembler flags.
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing
#  -gstabs:   have the assembler create line number information; note that
#             for use in COFF files, additional information about filenames
#             and function names needs to be present in the assembler source
#             files -- see avr-libc docs [FIXME: not yet described there]
##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
#ASFLAGS += -DF_OSC=$(F_OSC)
 
 
#Additional libraries.
 
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 
# Floating point printf version (requires MATH_LIB = -lm below)
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
PRINTF_LIB = 
 
# Minimalistic scanf version
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
SCANF_LIB = 
 
MATH_LIB = -lm
 
# External memory options
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# used for variables (.data/.bss) and heap (malloc()).
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
# only used for heap (malloc()).
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
 
EXTMEMOPTS =
 
# Linker flags.
#  -Wl,...:     tell GCC to pass this to linker.
#    -Map:      create map file
#    --cref:    add cross reference to  map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 
 
 
## HomeAutomation-users: settings are moved to system.inc ##
 
# Programming support using avrdude. Settings and variables.
 
# Programming hardware: alf avr910 avrisp bascom bsd 
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
#
# Type: avrdude -c ?
# to get a full listing.
#
#AVRDUDE_PROGRAMMER = avrispmkII
 
# com1 = serial port. Use lpt1 to connect to parallel port.
#AVRDUDE_PORT = usb    # programmer connected to serial device
#AVRDUDE_BAUD = 115200
 
#AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 
 
# Uncomment the following if you want avrdude's erase cycle counter.
# Note that this counter needs to be initialized first using -Yn,
# see avrdude manual.
#AVRDUDE_ERASE_COUNTER = -y
 
# Uncomment the following if you do /not/ wish a verification to be
# performed after programming the device.
#AVRDUDE_NO_VERIFY = -V
 
# Increase verbosity level.  Please use this when submitting bug
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
 
#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
#AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
#AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
#AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 
 
 
# ---------------------------------------------------------------------------
 
# Define directories, if needed.
DIRAVR = c:/progra~1/winavr
DIRAVRBIN = $(DIRAVR)/bin
DIRAVRUTILS = $(DIRAVR)/utils/bin
DIRINC = .
DIRLIB = $(DIRAVR)/avr/lib
 
 
# Define programs and commands.
SHELL = sh
CC = avr-gcc
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
NM = avr-nm
#AVRDUDE = avrdude
REMOVE = rm -f
COPY = cp
 
 
 
 
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = --------  end  --------
MSG_SIZE_BEFORE = Size before: 
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
 
 
 
 
# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
 
# Define all listing files.
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
 
 
# Compiler flags to generate dependency files.
### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
 
# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 
 
 
# Default target.
all: begin gccversion sizebefore build sizeafter finished end
 
build: elf hex eep lss sym
 
elf: $(TARGET).elf
hex: $(TARGET).hex
eep: $(TARGET).eep
lss: $(TARGET).lss 
sym: $(TARGET).sym
 
 
 
# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
	@echo
	@echo $(MSG_BEGIN)
 
finished:
	@echo $(MSG_ERRORS_NONE)
 
end:
	@echo $(MSG_END)
	@echo
 
 
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf
sizebefore:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
 
sizeafter:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
 
 
 
# Display compiler version information.
gccversion : 
	@$(CC) --version
 
 
# Program the device.  
install: $(TARGET).hex $(TARGET).eep
	$(UPLOAD) $(ULFLAGS)
 
# Program the device.  
program: $(TARGET).hex $(TARGET).eep
	$(UPLOAD) $(ULFLAGS)
#	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
#programlock: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
 
#programinit: 
#	$(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
 
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .data-0x800000 \
--change-section-address .bss-0x800000 \
--change-section-address .noinit-0x800000 \
--change-section-address .eeprom-0x810000 
 
 
coff: $(TARGET).elf
	@echo
	@echo $(MSG_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 
 
extcoff: $(TARGET).elf
	@echo
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 
 
 
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
	@echo
	@echo $(MSG_FLASH) $@
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 
%.eep: %.elf
	@echo
	@echo $(MSG_EEPROM) $@
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
# Create extended listing file from ELF output file.
%.lss: %.elf
	@echo
	@echo $(MSG_EXTENDED_LISTING) $@
	$(OBJDUMP) -h -S $< > $@
 
# Create a symbol table from ELF output file.
%.sym: %.elf
	@echo
	@echo $(MSG_SYMBOL_TABLE) $@
	$(NM) -n $< > $@
 
 
 
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
	@echo
	@echo $(MSG_LINKING) $@
	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
 
 
# Compile: create object files from C source files.
%.o : %.c
	@echo
	@echo $(MSG_COMPILING) $<
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
 
 
# Compile: create assembler files from C source files.
%.s : %.c
	$(CC) -S $(ALL_CFLAGS) $< -o $@
 
 
# Assemble: create object files from assembler source files.
%.o : %.S
	@echo
	@echo $(MSG_ASSEMBLING) $<
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
 
 
 
# Target: clean project.
clean: begin clean_list finished end
 
clean_list :
	@echo
	@echo $(MSG_CLEANING)
	$(REMOVE) $(TARGET).hex
	$(REMOVE) $(TARGET).eep
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).cof
	$(REMOVE) $(TARGET).elf
	$(REMOVE) $(TARGET).map
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).a90
	$(REMOVE) $(TARGET).sym
	$(REMOVE) $(TARGET).lnk
	$(REMOVE) $(TARGET).lss
	$(REMOVE) $(OBJ)
	$(REMOVE) $(LST)
	$(REMOVE) $(SRC:.c=.s)
	$(REMOVE) $(SRC:.c=.d)
	$(REMOVE) .dep/*
 
 
 
# Include the dependency files.
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 
 
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list program programlock programinit
 

Rev 698	Rev 859
1	# Hey Emacs, this is a -- makefile --	1	# Hey Emacs, this is a -- makefile --
2	#	2	#
3	# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.	3	# WinAVR makefile written by Eric B. Weddington, J�rg Wunsch, et al.
4	# Released to the Public Domain	4	# Released to the Public Domain
5	# Please read the make user manual!	5	# Please read the make user manual!
6	#	6	#
7	# Additional material for this makefile was submitted by:	7	# Additional material for this makefile was submitted by:
8	# Tim Henigan	8	# Tim Henigan
9	# Peter Fleury	9	# Peter Fleury
10	# Reiner Patommel	10	# Reiner Patommel
11	# Sander Pool	11	# Sander Pool
12	# Frederik Rouleau	12	# Frederik Rouleau
13	# Markus Pfaff	13	# Markus Pfaff
14	#	14	#
15	# On command line:	15	# On command line:
16	#	16	#
17	# make all = Make software.	17	# make all = Make software.
18	#	18	#
19	# make clean = Clean out built project files.	19	# make clean = Clean out built project files.
20	#	20	#
21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).	21	# make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
22	#	22	#
23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio	23	# make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
24	# 4.07 or greater).	24	# 4.07 or greater).
25	#	25	#
26	# make program = Download the hex file to the device, using avrdude. Please	26	# make program = Download the hex file to the device, using avrdude. Please
27	# customize the avrdude settings below first!	27	# customize the avrdude settings below first!
28	#	28	#
29	# make filename.s = Just compile filename.c into the assembler code only	29	# make filename.s = Just compile filename.c into the assembler code only
30	#	30	#
31	# To rebuild project do "make clean" then "make all".	31	# To rebuild project do "make clean" then "make all".
32	#	32	#
33		33
34	########	34	########
35	# Differences from WinAVR 20040720 sample:	35	# Differences from WinAVR 20040720 sample:
36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)	36	# - DEPFLAGS according to Eric Weddingtion's fix (avrfreaks/gcc-forum)
37	# - F_OSC Define in CFLAGS and AFLAGS	37	# - F_OSC Define in CFLAGS and AFLAGS
38		38
-		39	## HomeAutomation-users! Make sure you have a system.inc in your EmbeddedSoftware/AVR/personal folder ##
39		40
40	# MCU name	-
41	~~#MCU~~ = ~~atmega32~~	41	## FUSES, will automatically be programmed ##
42	#MCU = atmega8	42	#MCU = atmega8
-		43
43	~~MCU~~ = atmega88	44	#MCU = atmega88
-		45	#HIGHFUSE=0xdc
-		46	#LOWFUSE=0xe2
-		47	#EXTFUSE=0x01
-		48
44	~~#MCU~~ = atmega168	49	MCU = atmega168
-		50	HIGHFUSE=0xdc
-		51	LOWFUSE=0xe2
-		52	EXTFUSE=0x01
-		53
-		54
-		55	# for using the same system.inc we use BIOSDIR and BIOSTARGET for setting the correct file to flash
-		56	# flash:w:$(BIOSDIR)/$(BIOSTARGET).hex
-		57	BIOSDIR = .
-		58	BIOSTARGET = main
-		59	include ../../personal/system.inc
45		60
46		61
47	# Output format. (can be srec, ihex, binary)	62	# Output format. (can be srec, ihex, binary)
48	FORMAT = ihex	63	FORMAT = ihex
49		64
50		65
51	# Target file name (without extension).	66	# Target file name (without extension).
52	TARGET = main	67	TARGET = main
53		68
54	LIBDIR = ../../avr-lib/	69	LIBDIR = ../../avr-lib/
55		70
56	# List C source files here. (C dependencies are automatically generated.)	71	# List C source files here. (C dependencies are automatically generated.)
57	SRC = $(TARGET).c\	72	SRC = $(TARGET).c\
58	$(LIBDIR)drivers/uart/serial.c\	73	$(LIBDIR)drivers/uart/serial.c\
59	$(LIBDIR)drivers/uart/uart.c\	74	$(LIBDIR)drivers/uart/uart.c\
60	$(LIBDIR)drivers/timer/timebase.c\	75	$(LIBDIR)drivers/timer/timebase.c\
61	$(LIBDIR)drivers/mcu/mcu.c\	76	$(LIBDIR)drivers/mcu/mcu.c\
62	$(LIBDIR)drivers/can/stdcan.c\	77	$(LIBDIR)drivers/can/stdcan.c\
63	$(LIBDIR)drivers/can/mcp2515/mcp2515.c\	78	$(LIBDIR)drivers/can/mcp2515/mcp2515.c\
64		79
65	# List Assembler source files here.	80	# List Assembler source files here.
66	# Make them always end in a capital .S. Files ending in a lowercase .s	81	# Make them always end in a capital .S. Files ending in a lowercase .s
67	# will not be considered source files but generated files (assembler	82	# will not be considered source files but generated files (assembler
68	# output from the compiler), and will be deleted upon "make clean"!	83	# output from the compiler), and will be deleted upon "make clean"!
69	# Even though the DOS/Win* filesystem matches both .s and .S the same,	84	# Even though the DOS/Win* filesystem matches both .s and .S the same,
70	# it will preserve the spelling of the filenames, and gcc itself does	85	# it will preserve the spelling of the filenames, and gcc itself does
71	# care about how the name is spelled on its command-line.	86	# care about how the name is spelled on its command-line.
72	ASRC =	87	ASRC =
73		88
74		89
75	# Optimization level, can be [0, 1, 2, 3, s].	90	# Optimization level, can be [0, 1, 2, 3, s].
76	# 0 = turn off optimization. s = optimize for size.	91	# 0 = turn off optimization. s = optimize for size.
77	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)	92	# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
78	OPT = s	93	OPT = s
79	#OPT = 3	94	#OPT = 3
80		95
81	# Debugging format.	96	# Debugging format.
82	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.	97	# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
83	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.	98	# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
84	#DEBUG = stabs	99	#DEBUG = stabs
85	DEBUG = dwarf-2	100	DEBUG = dwarf-2
86		101
87	# List any extra directories to look for include files here.	102	# List any extra directories to look for include files here.
88	# Each directory must be seperated by a space.	103	# Each directory must be seperated by a space.
89	EXTRAINCDIRS = $(LIBDIR)drivers/uart $(LIBDIR)drivers/timer $(LIBDIR)drivers/mcu $(LIBDIR)drivers/can/mcp2515/ $(LIBDIR)drivers/can/ $(LIBDIR)	104	EXTRAINCDIRS = $(LIBDIR)drivers/uart $(LIBDIR)drivers/timer $(LIBDIR)drivers/mcu $(LIBDIR)drivers/can/mcp2515/ $(LIBDIR)drivers/can/ $(LIBDIR)
90		105
91	# Compiler flag to set the C Standard level.	106	# Compiler flag to set the C Standard level.
92	# c89 - "ANSI" C	107	# c89 - "ANSI" C
93	# gnu89 - c89 plus GCC extensions	108	# gnu89 - c89 plus GCC extensions
94	# c99 - ISO C99 standard (not yet fully implemented)	109	# c99 - ISO C99 standard (not yet fully implemented)
95	# gnu99 - c99 plus GCC extensions	110	# gnu99 - c99 plus GCC extensions
96	CSTANDARD = -std=gnu99	111	CSTANDARD = -std=gnu99
97		112
98	# Place -D or -U options here	113	# Place -D or -U options here
99	CDEFS =	114	CDEFS =
100		115
101	# Place -I options here	116	# Place -I options here
102	CINCS =	117	CINCS =
103		118
104		119
105	# Compiler flags.	120	# Compiler flags.
106	# -g*: generate debugging information	121	# -g*: generate debugging information
107	# -O*: optimization level	122	# -O*: optimization level
108	# -f...: tuning, see GCC manual and avr-libc documentation	123	# -f...: tuning, see GCC manual and avr-libc documentation
109	# -Wall...: warning level	124	# -Wall...: warning level
110	# -Wa,...: tell GCC to pass this to the assembler.	125	# -Wa,...: tell GCC to pass this to the assembler.
111	# -adhlns...: create assembler listing	126	# -adhlns...: create assembler listing
112	CFLAGS =	127	CFLAGS =
113	#CFLAGS += -g$(DEBUG)	128	#CFLAGS += -g$(DEBUG)
114	CFLAGS += $(CDEFS) $(CINCS)	129	CFLAGS += $(CDEFS) $(CINCS)
115	CFLAGS += -O$(OPT)	130	CFLAGS += -O$(OPT)
116	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums	131	CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
117	CFLAGS += -Wall -Wstrict-prototypes	132	CFLAGS += -Wall -Wstrict-prototypes
118	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)	133	CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
119	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))	134	CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
120	CFLAGS += $(CSTANDARD)	135	CFLAGS += $(CSTANDARD)
121	#CFLAGS += -DF_CPU=$(F_CPU)	136	#CFLAGS += -DF_CPU=$(F_CPU)
122		137
123		138
124		139
125	# Assembler flags.	140	# Assembler flags.
126	# -Wa,...: tell GCC to pass this to the assembler.	141	# -Wa,...: tell GCC to pass this to the assembler.
127	# -ahlms: create listing	142	# -ahlms: create listing
128	# -gstabs: have the assembler create line number information; note that	143	# -gstabs: have the assembler create line number information; note that
129	# for use in COFF files, additional information about filenames	144	# for use in COFF files, additional information about filenames
130	# and function names needs to be present in the assembler source	145	# and function names needs to be present in the assembler source
131	# files -- see avr-libc docs [FIXME: not yet described there]	146	# files -- see avr-libc docs [FIXME: not yet described there]
132	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs	147	##ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
133	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)	148	ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-g$(DEBUG)
134	#ASFLAGS += -DF_OSC=$(F_OSC)	149	#ASFLAGS += -DF_OSC=$(F_OSC)
135		150
136		151
137	#Additional libraries.	152	#Additional libraries.
138		153
139	# Minimalistic printf version	154	# Minimalistic printf version
140	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min	155	PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
141		156
142	# Floating point printf version (requires MATH_LIB = -lm below)	157	# Floating point printf version (requires MATH_LIB = -lm below)
143	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt	158	PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
144		159
145	PRINTF_LIB =	160	PRINTF_LIB =
146		161
147	# Minimalistic scanf version	162	# Minimalistic scanf version
148	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min	163	SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
149		164
150	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)	165	# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
151	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt	166	SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
152		167
153	SCANF_LIB =	168	SCANF_LIB =
154		169
155	MATH_LIB = -lm	170	MATH_LIB = -lm
156		171
157	# External memory options	172	# External memory options
158		173
159	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	174	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
160	# used for variables (.data/.bss) and heap (malloc()).	175	# used for variables (.data/.bss) and heap (malloc()).
161	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff	176	#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
162		177
163	# 64 KB of external RAM, starting after internal RAM (ATmega128!),	178	# 64 KB of external RAM, starting after internal RAM (ATmega128!),
164	# only used for heap (malloc()).	179	# only used for heap (malloc()).
165	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff	180	#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
166		181
167	EXTMEMOPTS =	182	EXTMEMOPTS =
168		183
169	# Linker flags.	184	# Linker flags.
170	# -Wl,...: tell GCC to pass this to linker.	185	# -Wl,...: tell GCC to pass this to linker.
171	# -Map: create map file	186	# -Map: create map file
172	# --cref: add cross reference to map file	187	# --cref: add cross reference to map file
173	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref	188	LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
174	LDFLAGS += $(EXTMEMOPTS)	189	LDFLAGS += $(EXTMEMOPTS)
175	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)	190	LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
176		191
177		192
178		-
-		193	## HomeAutomation-users: settings are moved to system.inc ##
179		194
180	# Programming support using avrdude. Settings and variables.	195	# Programming support using avrdude. Settings and variables.
181		196
182	# Programming hardware: alf avr910 avrisp bascom bsd	197	# Programming hardware: alf avr910 avrisp bascom bsd
183	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500	198	# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
184	#	199	#
185	# Type: avrdude -c ?	200	# Type: avrdude -c ?
186	# to get a full listing.	201	# to get a full listing.
187	#	202	#
188	~~AVRDUDE_PROGRAMMER~~ = ~~dragon_isp~~	203	#AVRDUDE_PROGRAMMER = avrispmkII
189		204
190	# com1 = serial port. Use lpt1 to connect to parallel port.	205	# com1 = serial port. Use lpt1 to connect to parallel port.
191	~~AVRDUDE_PORT~~ = usb # programmer connected to serial device	206	#AVRDUDE_PORT = usb # programmer connected to serial device
192	~~AVRDUDE_BAUD~~ = 115200	207	#AVRDUDE_BAUD = 115200
193		208
194	~~AVRDUDE_WRITE_FLASH~~ = -U flash:w:$(TARGET).hex	209	#AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
195	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep	210	#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
196		211
197		212
198	# Uncomment the following if you want avrdude's erase cycle counter.	213	# Uncomment the following if you want avrdude's erase cycle counter.
199	# Note that this counter needs to be initialized first using -Yn,	214	# Note that this counter needs to be initialized first using -Yn,
200	# see avrdude manual.	215	# see avrdude manual.
201	#AVRDUDE_ERASE_COUNTER = -y	216	#AVRDUDE_ERASE_COUNTER = -y
202		217
203	# Uncomment the following if you do /not/ wish a verification to be	218	# Uncomment the following if you do /not/ wish a verification to be
204	# performed after programming the device.	219	# performed after programming the device.
205	#AVRDUDE_NO_VERIFY = -V	220	#AVRDUDE_NO_VERIFY = -V
206		221
207	# Increase verbosity level. Please use this when submitting bug	222	# Increase verbosity level. Please use this when submitting bug
208	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>	223	# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
209	# to submit bug reports.	224	# to submit bug reports.
210	#AVRDUDE_VERBOSE = -v -v	225	#AVRDUDE_VERBOSE = -v -v
211		226
212	~~AVRDUDE_FLAGS~~ = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)	227	#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -b $(AVRDUDE_BAUD)
213	~~AVRDUDE_FLAGS~~ += $(AVRDUDE_NO_VERIFY)	228	#AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
214	~~AVRDUDE_FLAGS~~ += $(AVRDUDE_VERBOSE)	229	#AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
215	~~AVRDUDE_FLAGS~~ += $(AVRDUDE_ERASE_COUNTER)	230	#AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
216		231
217		232
218		233
219	# ---------------------------------------------------------------------------	234	# ---------------------------------------------------------------------------
220		235
221	# Define directories, if needed.	236	# Define directories, if needed.
222	DIRAVR = c:/progra~1/winavr	237	DIRAVR = c:/progra~1/winavr
223	DIRAVRBIN = $(DIRAVR)/bin	238	DIRAVRBIN = $(DIRAVR)/bin
224	DIRAVRUTILS = $(DIRAVR)/utils/bin	239	DIRAVRUTILS = $(DIRAVR)/utils/bin
225	DIRINC = .	240	DIRINC = .
226	DIRLIB = $(DIRAVR)/avr/lib	241	DIRLIB = $(DIRAVR)/avr/lib
227		242
228		243
229	# Define programs and commands.	244	# Define programs and commands.
230	SHELL = sh	245	SHELL = sh
231	CC = avr-gcc	246	CC = avr-gcc
232	OBJCOPY = avr-objcopy	247	OBJCOPY = avr-objcopy
233	OBJDUMP = avr-objdump	248	OBJDUMP = avr-objdump
234	SIZE = avr-size	249	SIZE = avr-size
235	NM = avr-nm	250	NM = avr-nm
236	~~AVRDUDE~~ = avrdude	251	#AVRDUDE = avrdude
237	REMOVE = rm -f	252	REMOVE = rm -f
238	COPY = cp	253	COPY = cp
239		254
240		255
241		256
242		257
243	# Define Messages	258	# Define Messages
244	# English	259	# English
245	MSG_ERRORS_NONE = Errors: none	260	MSG_ERRORS_NONE = Errors: none
246	MSG_BEGIN = -------- begin --------	261	MSG_BEGIN = -------- begin --------
247	MSG_END = -------- end --------	262	MSG_END = -------- end --------
248	MSG_SIZE_BEFORE = Size before:	263	MSG_SIZE_BEFORE = Size before:
249	MSG_SIZE_AFTER = Size after:	264	MSG_SIZE_AFTER = Size after:
250	MSG_COFF = Converting to AVR COFF:	265	MSG_COFF = Converting to AVR COFF:
251	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:	266	MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
252	MSG_FLASH = Creating load file for Flash:	267	MSG_FLASH = Creating load file for Flash:
253	MSG_EEPROM = Creating load file for EEPROM:	268	MSG_EEPROM = Creating load file for EEPROM:
254	MSG_EXTENDED_LISTING = Creating Extended Listing:	269	MSG_EXTENDED_LISTING = Creating Extended Listing:
255	MSG_SYMBOL_TABLE = Creating Symbol Table:	270	MSG_SYMBOL_TABLE = Creating Symbol Table:
256	MSG_LINKING = Linking:	271	MSG_LINKING = Linking:
257	MSG_COMPILING = Compiling:	272	MSG_COMPILING = Compiling:
258	MSG_ASSEMBLING = Assembling:	273	MSG_ASSEMBLING = Assembling:
259	MSG_CLEANING = Cleaning project:	274	MSG_CLEANING = Cleaning project:
260		275
261		276
262		277
263		278
264	# Define all object files.	279	# Define all object files.
265	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)	280	OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
266		281
267	# Define all listing files.	282	# Define all listing files.
268	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)	283	LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
269		284
270		285
271	# Compiler flags to generate dependency files.	286	# Compiler flags to generate dependency files.
272	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d	287	### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
273	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d	288	GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
274		289
275	# Combine all necessary flags and optional flags.	290	# Combine all necessary flags and optional flags.
276	# Add target processor to flags.	291	# Add target processor to flags.
277	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)	292	ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
278	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)	293	ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
279		294
280		295
281		296
282		297
283		298
284	# Default target.	299	# Default target.
285	all: begin gccversion sizebefore build sizeafter finished end	300	all: begin gccversion sizebefore build sizeafter finished end
286		301
287	build: elf hex eep lss sym	302	build: elf hex eep lss sym
288		303
289	elf: $(TARGET).elf	304	elf: $(TARGET).elf
290	hex: $(TARGET).hex	305	hex: $(TARGET).hex
291	eep: $(TARGET).eep	306	eep: $(TARGET).eep
292	lss: $(TARGET).lss	307	lss: $(TARGET).lss
293	sym: $(TARGET).sym	308	sym: $(TARGET).sym
294		309
295		310
296		311
297	# Eye candy.	312	# Eye candy.
298	# AVR Studio 3.x does not check make's exit code but relies on	313	# AVR Studio 3.x does not check make's exit code but relies on
299	# the following magic strings to be generated by the compile job.	314	# the following magic strings to be generated by the compile job.
300	begin:	315	begin:
301	@echo	316	@echo
302	@echo $(MSG_BEGIN)	317	@echo $(MSG_BEGIN)
303		318
304	finished:	319	finished:
305	@echo $(MSG_ERRORS_NONE)	320	@echo $(MSG_ERRORS_NONE)
306		321
307	end:	322	end:
308	@echo $(MSG_END)	323	@echo $(MSG_END)
309	@echo	324	@echo
310		325
311		326
312	# Display size of file.	327	# Display size of file.
313	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex	328	HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
314	ELFSIZE = $(SIZE) -A $(TARGET).elf	329	ELFSIZE = $(SIZE) -A $(TARGET).elf
315	sizebefore:	330	sizebefore:
316	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi	331	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
317		332
318	sizeafter:	333	sizeafter:
319	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi	334	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
320		335
321		336
322		337
323	# Display compiler version information.	338	# Display compiler version information.
324	gccversion :	339	gccversion :
325	@$(CC) --version	340	@$(CC) --version
326		341
327		342
-		343	# Program the device.
-		344	install: $(TARGET).hex $(TARGET).eep
-		345	$(UPLOAD) $(ULFLAGS)
328		346
329	# Program the device.	347	# Program the device.
330	program: $(TARGET).hex $(TARGET).eep	348	program: $(TARGET).hex $(TARGET).eep
-		349	$(UPLOAD) $(ULFLAGS)
331	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)	350	# $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
332		351
333	#programlock:	352	#programlock:
334	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m	353	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U lock:w:0x00:m
335		354
336	#programinit:	355	#programinit:
337	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m	356	# $(AVRDUDE) $(AVRDUDE_FLAGS) -U hfuse:w:0xd9:m -U lfuse:w:0xe4:m
338		357
339	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.	358	# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
340	COFFCONVERT=$(OBJCOPY) --debugging \	359	COFFCONVERT=$(OBJCOPY) --debugging \
341	--change-section-address .data-0x800000 \	360	--change-section-address .data-0x800000 \
342	--change-section-address .bss-0x800000 \	361	--change-section-address .bss-0x800000 \
343	--change-section-address .noinit-0x800000 \	362	--change-section-address .noinit-0x800000 \
344	--change-section-address .eeprom-0x810000	363	--change-section-address .eeprom-0x810000
345		364
346		365
347	coff: $(TARGET).elf	366	coff: $(TARGET).elf
348	@echo	367	@echo
349	@echo $(MSG_COFF) $(TARGET).cof	368	@echo $(MSG_COFF) $(TARGET).cof
350	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof	369	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
351		370
352		371
353	extcoff: $(TARGET).elf	372	extcoff: $(TARGET).elf
354	@echo	373	@echo
355	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof	374	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
356	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof	375	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
357		376
358		377
359		378
360	# Create final output files (.hex, .eep) from ELF output file.	379	# Create final output files (.hex, .eep) from ELF output file.
361	%.hex: %.elf	380	%.hex: %.elf
362	@echo	381	@echo
363	@echo $(MSG_FLASH) $@	382	@echo $(MSG_FLASH) $@
364	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@	383	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
365		384
366	%.eep: %.elf	385	%.eep: %.elf
367	@echo	386	@echo
368	@echo $(MSG_EEPROM) $@	387	@echo $(MSG_EEPROM) $@
369	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \	388	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
370	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@	389	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
371		390
372	# Create extended listing file from ELF output file.	391	# Create extended listing file from ELF output file.
373	%.lss: %.elf	392	%.lss: %.elf
374	@echo	393	@echo
375	@echo $(MSG_EXTENDED_LISTING) $@	394	@echo $(MSG_EXTENDED_LISTING) $@
376	$(OBJDUMP) -h -S $< > $@	395	$(OBJDUMP) -h -S $< > $@
377		396
378	# Create a symbol table from ELF output file.	397	# Create a symbol table from ELF output file.
379	%.sym: %.elf	398	%.sym: %.elf
380	@echo	399	@echo
381	@echo $(MSG_SYMBOL_TABLE) $@	400	@echo $(MSG_SYMBOL_TABLE) $@
382	$(NM) -n $< > $@	401	$(NM) -n $< > $@
383		402
384		403
385		404
386	# Link: create ELF output file from object files.	405	# Link: create ELF output file from object files.
387	.SECONDARY : $(TARGET).elf	406	.SECONDARY : $(TARGET).elf
388	.PRECIOUS : $(OBJ)	407	.PRECIOUS : $(OBJ)
389	%.elf: $(OBJ)	408	%.elf: $(OBJ)
390	@echo	409	@echo
391	@echo $(MSG_LINKING) $@	410	@echo $(MSG_LINKING) $@
392	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)	411	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
393		412
394		413
395	# Compile: create object files from C source files.	414	# Compile: create object files from C source files.
396	%.o : %.c	415	%.o : %.c
397	@echo	416	@echo
398	@echo $(MSG_COMPILING) $<	417	@echo $(MSG_COMPILING) $<
399	$(CC) -c $(ALL_CFLAGS) $< -o $@	418	$(CC) -c $(ALL_CFLAGS) $< -o $@
400		419
401		420
402	# Compile: create assembler files from C source files.	421	# Compile: create assembler files from C source files.
403	%.s : %.c	422	%.s : %.c
404	$(CC) -S $(ALL_CFLAGS) $< -o $@	423	$(CC) -S $(ALL_CFLAGS) $< -o $@
405		424
406		425
407	# Assemble: create object files from assembler source files.	426	# Assemble: create object files from assembler source files.
408	%.o : %.S	427	%.o : %.S
409	@echo	428	@echo
410	@echo $(MSG_ASSEMBLING) $<	429	@echo $(MSG_ASSEMBLING) $<
411	$(CC) -c $(ALL_ASFLAGS) $< -o $@	430	$(CC) -c $(ALL_ASFLAGS) $< -o $@
412		431
413		432
414		433
415	# Target: clean project.	434	# Target: clean project.
416	clean: begin clean_list finished end	435	clean: begin clean_list finished end
417		436
418	clean_list :	437	clean_list :
419	@echo	438	@echo
420	@echo $(MSG_CLEANING)	439	@echo $(MSG_CLEANING)
421	$(REMOVE) $(TARGET).hex	440	$(REMOVE) $(TARGET).hex
422	$(REMOVE) $(TARGET).eep	441	$(REMOVE) $(TARGET).eep
423	$(REMOVE) $(TARGET).obj	442	$(REMOVE) $(TARGET).obj
424	$(REMOVE) $(TARGET).cof	443	$(REMOVE) $(TARGET).cof
425	$(REMOVE) $(TARGET).elf	444	$(REMOVE) $(TARGET).elf
426	$(REMOVE) $(TARGET).map	445	$(REMOVE) $(TARGET).map
427	$(REMOVE) $(TARGET).obj	446	$(REMOVE) $(TARGET).obj
428	$(REMOVE) $(TARGET).a90	447	$(REMOVE) $(TARGET).a90
429	$(REMOVE) $(TARGET).sym	448	$(REMOVE) $(TARGET).sym
430	$(REMOVE) $(TARGET).lnk	449	$(REMOVE) $(TARGET).lnk
431	$(REMOVE) $(TARGET).lss	450	$(REMOVE) $(TARGET).lss
432	$(REMOVE) $(OBJ)	451	$(REMOVE) $(OBJ)
433	$(REMOVE) $(LST)	452	$(REMOVE) $(LST)
434	$(REMOVE) $(SRC:.c=.s)	453	$(REMOVE) $(SRC:.c=.s)
435	$(REMOVE) $(SRC:.c=.d)	454	$(REMOVE) $(SRC:.c=.d)
436	$(REMOVE) .dep/*	455	$(REMOVE) .dep/*
437		456
438		457
439		458
440	# Include the dependency files.	459	# Include the dependency files.
441	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)	460	-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
442		461
443		462
444	# Listing of phony targets.	463	# Listing of phony targets.
445	.PHONY : all begin finish end sizebefore sizeafter gccversion \	464	.PHONY : all begin finish end sizebefore sizeafter gccversion \
446	build elf hex eep lss sym coff extcoff \	465	build elf hex eep lss sym coff extcoff \
447	clean clean_list program programlock programinit	466	clean clean_list program programlock programinit
448		467

Subversion Repositories HomeAutomation

(root)/trunk/EmbeddedSoftware/AVR/standalone/Can2Serial/makefile – Rev 698 → 859