WebSVN – HomeAutomation – Diff – /trunk/EmbeddedSoftware/PIC/canToSerial/Source/Main.c


/*********************************************************************
 *
 *                  Main application
 *
 *********************************************************************
 * FileName:        $HeadURL: https://svn.auml.se/svn/HomeAutomation/trunk/EmbeddedSoftware/PIC/canToSerial/Source/Main.c $
 
 * Last changed:    $LastChangedDate: 2006-11-14 21:22:17 +0100 (Tue, 14 Nov 2006) $
 * By:              $LastChangedBy: johboh $
 * Revision:        $Revision: 97 $
 ********************************************************************/
 
#include <compiler.h>
#include <stackTasks.h>
#include <Tick.h>
 
#ifdef USE_CAN
    #include <CAN.h>
#endif
 
#ifdef USE_UART
    #include <uart.h>
#endif
 
 
 
static void mainInit(void);
 
void main()
{
    static TICK t = 0;
 
    // Inits
 
    mainInit();
 
    #ifdef USE_CAN
        canInit();
    #endif
 
    #ifdef USE_UART
        uartInit();
    #endif
 
    tickInit();
 
   
 
    while(1)
    {  
    }
 
}
 
 
#pragma interruptlow HighISR
void HighISR(void)
{
 
 
    #ifdef USE_UART
        uartISR();
    #endif
 
    #ifdef USE_CAN
        canISR();
    #endif
 
 
    tickUpdate();
}
#pragma code highVector=0x08
void HighVector (void)
{
    _asm goto HighISR _endasm
}
#pragma code // Return to default code section
 
 
 
#pragma interruptlow LowISR
void LowISR(void)
{
 
}
#pragma code lowVector=0x18
void LowVector (void)
{
    _asm goto LowISR _endasm
}
#pragma code // Return to default code section
 
 
/*
*   Function: mainInit
*
*   Input:  none
*   Output: none
*   Pre-conditions: none
*   Affects: Se code
*   Depends: none.
*/
void mainInit()
{
    LED0_TRIS=0;   
 
    // Enable internal PORTB pull-ups
    INTCON2bits.RBPU = 0;
   
    // Enable Interrupts
    INTCONbits.GIEH = 1;
    INTCONbits.GIEL = 1;
 
 
    // Enable interrupt prirority
    RCONbits.IPEN=1;
   
 
}
 
/*
*   Function: canParse
*
*   Input:  Received can message
*   Output: none
*   Pre-conditions: canInit and received packet.
*   Affects: Sensors/actuators/etc. See code.
*   Depends: none.
*/
#ifdef USE_CAN
void canParse(CAN_MESSAGE cm)
{
    int i=0;
   
    uartPutc(UART_START_BYTE);
    uartPutc((BYTE)(cm.ident));
    uartPutc((BYTE)(cm.ident>>8));
    uartPutc((BYTE)(cm.ident>>16));
    uartPutc((BYTE)(cm.ident>>24));
    uartPutc(cm.extended);
    uartPutc(cm.remote_request);
    uartPutc(cm.data_length);
    for(i=0;i<8;i++) uartPutc(cm.data[i]);
    uartPutc(UART_END_BYTE);
 
}
#endif
 
 
/*
*   Function: uartParse
*
*   Input:  Received uart message
*   Output: none
*   Pre-conditions: uartInit and received byte.
*   Affects: Sensors/actuators/etc. See code.
*   Depends: none.
*/
#ifdef USE_UART
void uartParse(BYTE c)
{
    BYTE i;
    unsigned int wait = 0;
    CAN_MESSAGE cm;
    static BOOL waitingMessage = FALSE;
    static TICK timeout=0;
    static BYTE count=0;
 
    if (waitingMessage==TRUE && (tickGet()-timeout)>TICK_SECOND/20)
    {
        waitingMessage=FALSE;
    }
 
 
    if (waitingMessage==TRUE)
    {
 
        timeout=tickGet();
 
 
        // UART END
        if(count>=15)
        {
            if (c==UART_END_BYTE)
            {
                LED0_IO=~LED0_IO;
                //canParse(cm);
                while(!canSendMessage(cm,PRIO_HIGEST));
            }
            waitingMessage=FALSE;
            return;
        }
 
        // data
        if(count>=7)
        {
            cm.data[count-7]=c;
            count++;
            return;
        }
 
        // data length
        if(count>=6)
        {
            cm.data_length=c;
            count++;
            return;
        }
 
        // remote request
        if(count>=5)
        {
            cm.remote_request=c;
            count++;
            return;
        }
 
        // extended
        if(count>=4)
        {
            cm.extended=c;
            count++;
            return;
        }
 
        // ident
        if(count>=0)
        {
            cm.ident+=((DWORD)c<<(count*8));
            count++;
            return;
        }
   
    }
 
 
    if (c==UART_START_BYTE && waitingMessage==FALSE)
    {
            waitingMessage=TRUE;
            timeout=tickGet();
            count=0;
            cm.ident=0;
            return;
    }
 
 
}
#endif
 

Rev 73	Rev 97
1	/*********************************************************************	1	/*********************************************************************
2	*	2	*
3	* Main application	3	* Main application
4	*	4	*
5	*********************************************************************	5	*********************************************************************
6	* FileName: Main.c	6	* FileName: $HeadURL: https://svn.auml.se/svn/HomeAutomation/trunk/EmbeddedSoftware/PIC/canToSerial/Source/Main.c $
7	*	-
8	* ~~Author~~ ~~Date~~ ~~Comment~~	7	* Last changed: $LastChangedDate: 2006-11-14 21:22:17 +0100 (Tue, 14 Nov 2006) $
9	*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	8	* By: $LastChangedBy: johboh $
10	* ~~Johan Böhlin 21-10-06 Original~~ ~~(Rev~~ ~~1.0)~~	9	* Revision: $Revision: 97 $
11	********************************************************************/	10	********************************************************************/
12		11
13	#include <compiler.h>	12	#include <compiler.h>
14	#include <stackTasks.h>	13	#include <stackTasks.h>
15	#include <Tick.h>	14	#include <Tick.h>
16		15
17	#ifdef USE_CAN	16	#ifdef USE_CAN
18	#include <CAN.h>	17	#include <CAN.h>
19	#endif	18	#endif
20		19
21	#ifdef USE_UART	20	#ifdef USE_UART
22	#include <uart.h>	21	#include <uart.h>
23	#endif	22	#endif
24		23
25		24
26		25
27	static void mainInit(void);	26	static void mainInit(void);
28		27
29	void main()	28	void main()
30	{	29	{
31	static TICK t = 0;	30	static TICK t = 0;
32		31
33	// Inits	32	// Inits
34		33
35	mainInit();	34	mainInit();
36		35
37	#ifdef USE_CAN	36	#ifdef USE_CAN
38	canInit();	37	canInit();
39	#endif	38	#endif
40		39
41	#ifdef USE_UART	40	#ifdef USE_UART
42	uartInit();	41	uartInit();
43	#endif	42	#endif
44		43
45	tickInit();	44	tickInit();
46		45
47		46
48		47
49	while(1)	48	while(1)
50	{	49	{
51	}	50	}
52		51
53	}	52	}
54		53
55		54
56	#pragma interruptlow HighISR	55	#pragma interruptlow HighISR
57	void HighISR(void)	56	void HighISR(void)
58	{	57	{
59		58
60		59
61	#ifdef USE_UART	60	#ifdef USE_UART
62	uartISR();	61	uartISR();
63	#endif	62	#endif
64		63
65	#ifdef USE_CAN	64	#ifdef USE_CAN
66	canISR();	65	canISR();
67	#endif	66	#endif
68		67
69		68
70	tickUpdate();	69	tickUpdate();
71	}	70	}
72	#pragma code highVector=0x08	71	#pragma code highVector=0x08
73	void HighVector (void)	72	void HighVector (void)
74	{	73	{
75	_asm goto HighISR _endasm	74	_asm goto HighISR _endasm
76	}	75	}
77	#pragma code // Return to default code section	76	#pragma code // Return to default code section
78		77
79		78
80		79
81	#pragma interruptlow LowISR	80	#pragma interruptlow LowISR
82	void LowISR(void)	81	void LowISR(void)
83	{	82	{
84		83
85	}	84	}
86	#pragma code lowVector=0x18	85	#pragma code lowVector=0x18
87	void LowVector (void)	86	void LowVector (void)
88	{	87	{
89	_asm goto LowISR _endasm	88	_asm goto LowISR _endasm
90	}	89	}
91	#pragma code // Return to default code section	90	#pragma code // Return to default code section
92		91
93		92
94	/*	93	/*
95	* Function: mainInit	94	* Function: mainInit
96	*	95	*
97	* Input: none	96	* Input: none
98	* Output: none	97	* Output: none
99	* Pre-conditions: none	98	* Pre-conditions: none
100	* Affects: Se code	99	* Affects: Se code
101	* Depends: none.	100	* Depends: none.
102	*/	101	*/
103	void mainInit()	102	void mainInit()
104	{	103	{
105	LED0_TRIS=0;	104	LED0_TRIS=0;
106		105
107	// Enable internal PORTB pull-ups	106	// Enable internal PORTB pull-ups
108	INTCON2bits.RBPU = 0;	107	INTCON2bits.RBPU = 0;
109		108
110	// Enable Interrupts	109	// Enable Interrupts
111	INTCONbits.GIEH = 1;	110	INTCONbits.GIEH = 1;
112	INTCONbits.GIEL = 1;	111	INTCONbits.GIEL = 1;
113		112
114		113
115	// Enable interrupt prirority	114	// Enable interrupt prirority
116	RCONbits.IPEN=1;	115	RCONbits.IPEN=1;
117		116
118		117
119	}	118	}
120		119
121	/*	120	/*
122	* Function: canParse	121	* Function: canParse
123	*	122	*
124	* Input: Received can message	123	* Input: Received can message
125	* Output: none	124	* Output: none
126	* Pre-conditions: canInit and received packet.	125	* Pre-conditions: canInit and received packet.
127	* Affects: Sensors/actuators/etc. See code.	126	* Affects: Sensors/actuators/etc. See code.
128	* Depends: none.	127	* Depends: none.
129	*/	128	*/
130	#ifdef USE_CAN	129	#ifdef USE_CAN
131	void canParse(CAN_MESSAGE cm)	130	void canParse(CAN_MESSAGE cm)
132	{	131	{
133	int i=0;	132	int i=0;
134		133
135	uartPutc(UART_START_BYTE);	134	uartPutc(UART_START_BYTE);
136	uartPutc((BYTE)(cm.ident));	135	uartPutc((BYTE)(cm.ident));
137	uartPutc((BYTE)(cm.ident>>8));	136	uartPutc((BYTE)(cm.ident>>8));
138	uartPutc((BYTE)(cm.ident>>16));	137	uartPutc((BYTE)(cm.ident>>16));
139	uartPutc((BYTE)(cm.ident>>24));	138	uartPutc((BYTE)(cm.ident>>24));
140	uartPutc(cm.extended);	139	uartPutc(cm.extended);
141	uartPutc(cm.remote_request);	140	uartPutc(cm.remote_request);
142	uartPutc(cm.data_length);	141	uartPutc(cm.data_length);
143	for(i=0;i<8;i++) uartPutc(cm.data[i]);	142	for(i=0;i<8;i++) uartPutc(cm.data[i]);
144	uartPutc(UART_END_BYTE);	143	uartPutc(UART_END_BYTE);
145		144
146	}	145	}
147	#endif	146	#endif
148		147
149		148
150	/*	149	/*
151	* Function: uartParse	150	* Function: uartParse
152	*	151	*
153	* Input: Received uart message	152	* Input: Received uart message
154	* Output: none	153	* Output: none
155	* Pre-conditions: uartInit and received byte.	154	* Pre-conditions: uartInit and received byte.
156	* Affects: Sensors/actuators/etc. See code.	155	* Affects: Sensors/actuators/etc. See code.
157	* Depends: none.	156	* Depends: none.
158	*/	157	*/
159	#ifdef USE_UART	158	#ifdef USE_UART
160	void uartParse(BYTE c)	159	void uartParse(BYTE c)
161	{	160	{
162	BYTE i;	161	BYTE i;
163	unsigned int wait = 0;	162	unsigned int wait = 0;
164	CAN_MESSAGE cm;	163	CAN_MESSAGE cm;
165	static BOOL waitingMessage = FALSE;	164	static BOOL waitingMessage = FALSE;
166	static TICK timeout=0;	165	static TICK timeout=0;
167	static BYTE count=0;	166	static BYTE count=0;
168		167
169	if (waitingMessage==TRUE && (tickGet()-timeout)>TICK_SECOND/20)	168	if (waitingMessage==TRUE && (tickGet()-timeout)>TICK_SECOND/20)
170	{	169	{
171	waitingMessage=FALSE;	170	waitingMessage=FALSE;
172	}	171	}
173		172
174		173
175	if (waitingMessage==TRUE)	174	if (waitingMessage==TRUE)
176	{	175	{
177		176
178	timeout=tickGet();	177	timeout=tickGet();
179		178
180		179
181	// UART END	180	// UART END
182	if(count>=15)	181	if(count>=15)
183	{	182	{
184	if (c==UART_END_BYTE)	183	if (c==UART_END_BYTE)
185	{	184	{
186	LED0_IO=~LED0_IO;	185	LED0_IO=~LED0_IO;
187	//canParse(cm);	186	//canParse(cm);
188	while(!canSendMessage(cm,PRIO_HIGEST));	187	while(!canSendMessage(cm,PRIO_HIGEST));
189	}	188	}
190	waitingMessage=FALSE;	189	waitingMessage=FALSE;
191	return;	190	return;
192	}	191	}
193		192
194	// data	193	// data
195	if(count>=7)	194	if(count>=7)
196	{	195	{
197	cm.data[count-7]=c;	196	cm.data[count-7]=c;
198	count++;	197	count++;
199	return;	198	return;
200	}	199	}
201		200
202	// data length	201	// data length
203	if(count>=6)	202	if(count>=6)
204	{	203	{
205	cm.data_length=c;	204	cm.data_length=c;
206	count++;	205	count++;
207	return;	206	return;
208	}	207	}
209		208
210	// remote request	209	// remote request
211	if(count>=5)	210	if(count>=5)
212	{	211	{
213	cm.remote_request=c;	212	cm.remote_request=c;
214	count++;	213	count++;
215	return;	214	return;
216	}	215	}
217		216
218	// extended	217	// extended
219	if(count>=4)	218	if(count>=4)
220	{	219	{
221	cm.extended=c;	220	cm.extended=c;
222	count++;	221	count++;
223	return;	222	return;
224	}	223	}
225		224
226	// ident	225	// ident
227	if(count>=0)	226	if(count>=0)
228	{	227	{
229	cm.ident+=((DWORD)c<<(count*8));	228	cm.ident+=((DWORD)c<<(count*8));
230	count++;	229	count++;
231	return;	230	return;
232	}	231	}
233		232
234	}	233	}
235		234
236		235
237	if (c==UART_START_BYTE && waitingMessage==FALSE)	236	if (c==UART_START_BYTE && waitingMessage==FALSE)
238	{	237	{
239	waitingMessage=TRUE;	238	waitingMessage=TRUE;
240	timeout=tickGet();	239	timeout=tickGet();
241	count=0;	240	count=0;
242	cm.ident=0;	241	cm.ident=0;
243	return;	242	return;
244	}	243	}
245		244
246		245
247	}	246	}
248	#endif	247	#endif
249		248

Subversion Repositories HomeAutomation

(root)/trunk/EmbeddedSoftware/PIC/canToSerial/Source/Main.c @ 97 – Rev 73 → 97