Subversion Repositories HomeAutomation

## Node specific configuration file
# This configuration sets up a NodeEssential, v2 with ID 2. The AVR is using internal clock source, 8MHz
# Rename this file to config.inc and then modify the params below

HW_NAME=NodeEssential
HW_VERSION=2

# NODE_ID should be allocated from a database and not specified here (not done yet though)
# This number should be unique on your network
NODE_ID=0x02
# F_CPU is the clock frequency of your microcontroller, check fuses below for external/internal clock source
F_CPU=8000000UL

#---MEGA8---
#MCU=atmega8
#HIGHFUSE=0xd4
#LOWFUSE=0x24
#BOOT_START=0x1e00

#---MEGA88---
MCU=atmega88
HIGHFUSE=0xdc
LOWFUSE=0xe2
EXTFUSE=0x04
BOOT_START=0x1E00

#---mega168---
#MCU=atmega168
#HIGHFUSE=0xdc
#LOWFUSE=0xe2
#EXTFUSE=0x02
#BOOT_START=0x3C00

# CAN configuration
CAN_CONTROLLER=MCP2515
MCP_CLOCK_FREQ_MHZ=20
MCP_CAN_BITRATE_KBPS=250


#Some usual settings of fuses
#LOWFUSE for mega88 and mega168 
#0xe7       #CKDIV8=1, external crystal
#0xe0       #CKDIV8=1, external clock   (used if mcu is clocked from can-controller, F_CPU should be 16MHz or 20MHz)
#0xe2       #CKDIV8=1, internal RC      (internal AVR-clock, F_CPU should be 8MHz)
#LOWFUSE for mega8
#0x24       #BODLEVEL = 4.0V, BODEN=enabled, internal 8MHz
#0x20       #BODLEVEL = 4.0V, BODEN=enabled, external clock