Subversion Repositories HomeAutomation

## Section act_hd44780 -- Do not edit this line

act_hd44780_ID=<ID>
act_hd44780_WIDTH=20
act_hd44780_HEIGHT=4
#TYPE=0 for lcd, TYPE=1 for oled, changes brightness behaivure
act_hd44780_TYPE=0

#only used on an lcd
act_hd44780_INITIAL_BACKLIGHT=0x7F

#this is contrast on an lcd and brightness on oled (default value of 0xf0 should be good on oled)
act_hd44780_INITIAL_CONTRAST=0x10

# PIN definitions for CoreCard setup
LCD_E=EXP_D
LCD_RW=EXP_B
LCD_RS=EXP_A
LCD_DB4=EXP_J
LCD_DB5=EXP_K
LCD_DB6=EXP_L
LCD_DB7=EXP_M

# PIN definitions for LCDNode setup
#LCD_PORT=PORTD          /* port for the LCD lines */
#LCD_DATA0_PORT=PORTC    /* port for 4bit data bit 0 */
#LCD_DATA1_PORT=PORTC    /* port for 4bit data bit 1 */
#LCD_DATA2_PORT=PORTD    /* port for 4bit data bit 2 */
#LCD_DATA3_PORT=PORTD    /* port for 4bit data bit 3 */
#LCD_DATA0_PIN=4         /* pin for 4bit data bit 0 */
#LCD_DATA1_PIN=5         /* pin for 4bit data bit 1 */
#LCD_DATA2_PIN=6         /* pin for 4bit data bit 2 */
#LCD_DATA3_PIN=7         /* pin for 4bit data bit 3 */
#LCD_RS_PORT=PORTD       /* port for RS line */
#LCD_RS_PIN=0            /* pin  for RS line */
#LCD_RW_PORT=PORTD       /* port for RW line */
#LCD_RW_PIN=1            /* pin  for RW line */
#LCD_E_PORT=PORTD        /* port for Enable line */
#LCD_E_PIN=4             /* pin  for Enable line */

act_hd44780_USE_AUTO_BL=1
act_hd44780_LIGHTSENSOR_AD=7
ADCHAN7=1


## End section act_hd44780 -- Do not edit this line